How do i make a line vector get longer over time?

I'm trying to make straight lines grow out of a stationary dot, like veins. I've tried shape tween, but it only works for shapes, not lines. I'd just get a blank workspace when I hit play. I've also tried motion tween, but I can't get the line to grow continuously to a point. Can someone help me please? I'm very new to Flash.

How about drawing a very short line - don't make it a symbol.
Add 60 frames or so, enter a keyframe at the end.
On that last keyframe, scale the line to the size you want.
Select the other frames, right click, choose shape tween.
Your line will grow
You could then duplicate the rows and rotate the lines, or make into a MovieClip and then duplicate/rotate the movie clip for multiple versions.
(If this helps, please click as helpful etc)

Similar Messages

  • How can I make the line segment tool repeat several times?

    How can I make the line segment tool repeat several times?

    If this is what you want, hold the ~ key on your keyboard while dragging with the tool.
    If you want spaced copies of the completed line, use the Transform Effects from the Effects menu.

  • How do I make an XY-Graph plot points over time?

    I am building a program to plot and take data of a relationship between two voltages.  One is voltage is uniquely dependent on the other.  So far I have successfully built an XY-Graph to plot the voltages against each other (Voltage1 along the x-axis and Voltage2 along the y-axis).  However, the XY-Graph only diplays the point (V1, V2) at the instantaneous time I am looking at it, and does not continuously plot different points as I vary the independent voltage.  I need the graph to display all the points that occur as I vary the independent voltage.  As of right now, all I see is one little cursor that moves all over the graph as I vary it.  My program consists of a While Loop that contains all of the following:  two seperate data anolog input functions that take both voltage separately from my board.  The the output samples from each 'AI Sample' function are then bundled into one cluster using the 'bundle' function.  The cluster output from the 'bundle' function is then wired to a 'build array' function.  The 1-D array output from the 'build array' function is then wired to my 'XY-Graph'.  How do I get the XY-Graph to plot a point every millisecond or so?

    Bundling and then using the Build Array is not correct. Yuo can see the correct method in the help for an XY Graph below. In order to use the normal XY Grpah, you would have two shif registers. One for the X array and one for the Y. Bundle the two arrays and then wire to the graph.
    The other way is to use the Express XY Graph. With that, you can just wire your scalars to the X and Y inputs and set the Reset input to false.
    Message Edited by Dennis Knutson on 11-12-2007 06:32 PM
    Attachments:
    XY Graph 1.PNG ‏21 KB
    XY Graph 2.PNG ‏6 KB

  • How can I make a line at 40 degree angle in Keynote 6

    How can you make a line of 40 degrees (or anywhere between 40 to 45) angle in the new Keynote 6.2.2. It seems they took away that nice feature from the previous version. When I move one end of a line, it locks onto 45 when I get near that angle, and jumps off directly to 34 when I try to move away. Previously you could click on a line to transform the ends into red spots, and move them independently to any angle or length. Now it locks onto 45, or 135 or 90 etc. I don't have any of the guides on or any other feature. This is supposed to happen only when holding shift key (which is also a great feature). If it locks onto the magic angles without holding shift, then there is no sense if having that feature at all.

    Press the command key when dragging, this switches off snapping and allows continuous placement.
    If you like numerical control:     Inspector > Format > Arrange > Rotate

  • When I export my file to generate a .pdf, the text box literally has a box around it! How do I make that line disappear?

    When I export my file to generate a .pdf, the text box literally has a box around it! How do I make that line disappear?

    Sounds like you have a stroke on it. Select the frame and set the stroke to none.

  • When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

    When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

    Hi
    chorleyman wrote:
    you do have to actually define the area to be bounced in the dialogue window that comes up - there are some discrepencies in the way that the program behaves like that,
    Apart from the "Include Audio Tail" function, which can leave Logic bouncing for a very, very long time, there are generally, no discrepancies regarding the Bounce Locators:
    If Cycle is enabled, the bounce locators will be set to the cycle locators.
    If Cycle is off, and regions are selected, the bounce locators will be set to the selection.
    If cycle is off, and no regions are selected, the bounce locators will be set from the Project Start to the project end.
    It is smart to actually check that the bounce locators are set where you would like them to be.
    wildfire31 wrote:
    When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop
    If you get caught with a bounce that does not stop, Command . (period) should do the trick.
    CCT

  • I have been using numbers spreadsheet to do my time card. When I delete the info on my spreadsheet to change the info for the new week the dark grid lines turn to a light gray.  How do I make the lines dark again?

    I have been using a spreadsheet in numbers to do my time card. When I delete the info on my spreadsheet to change for the new week the dark grid lines turn to a light gray.  How do I make the lines dark again?

    Change the email on the old account to another new, current email address.
    An email address can only be linked to one Apple ID.
    It is possible to have content from multiple Apple ID's on a single iDevice.

  • How can I make command line interface (CLI)

    Hi All,
    How can I make command line interface ( CLI ) In Java using JTextArea or JTextField.
    Thanks In advance..
    Vikas Sahu

    We do agree with your assessment and have plans to improve all of these aspects. Unfortunately, it takes a long time and a lot of work to turn "working" software into "simple to use" software, but we are working on it, and it is a high priority for us to make it simpler to use and develop for and administer Coherence.
    Peace,
    Cameron Purdy | Oracle Coherence

  • What do they mean by your apple id has been disabled and how do I enable it?  I get this each time I try to update my apps.

    what do they mean by your apple id has been disabled and how do I enable it?  I get this each time I try to update my apps.

    Got it sorted. AN e-mail to teh support centre got me three replies, two reasuring me that someone os working on it and the third giving me the information that the ID is enabled again and ready to use. All within 24h. Of course without any information as to why the problem came up in teh first place. At least it was swift action.

  • Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything.

    Ever since installing on my 64bit Windows 7 install, Firefox has continually gotten more sluggish as time moves on, hangs for 10-15 secs at a time and just gets worse over time with the updates and everything. It was fast when I first installed, but over the last six mos has slown to a crawl.

    upgrade your browser to Firefox 8 and try
    * getfirefox.com

  • How do I make the line tool work again?

    Can you help me make the line tool operate properly again? I just now accidentally touched something on my keyboard. And now, when I click on the Line Tool in the Tools Panel, and then press the "x" key to toggle the color of the line tool between being black, or being white, neither options works anymore. Now, when I draw a line, it does not apply a black line to my drawing. And when I toggle and press the "x" key again, it doesn"t apply a white line to the drawing either. When the line tool is "white", and I draw a line across a black area, nothing happens. The white line tool doesn't apply to the drawing.
    When I've gone to your "help" menu, I'm instructed to press the "Object Drawing Button" in the "Tool Panel". But I've looked at every item in the "Tool Panel" and I cannot find the "Object Drawing Button"..
    Can you give me the steps that will help me make the line tool work once again?
    Thanks, Mardty Anderson
    (520) 975-8547

    Thank you for taking your time to respond. I'm using Adobe Photoshop
    Elements 11.
    A colleague was able to get the problem solved. He chose the "star"
    instead of the line. The star worked fine and showed up on the drawing
    I'm working on. Then he switched back to the "line". Lo and belold, the
    line worked. It's been working fine ever since. Maybe it was a bug in
    the program?
    Do you know how to use the Picture Organizer in this Photoshop program?
    I have several thousand illustrations. The Organizer seems to recognize
    some of them (like 5 or 6). But most all of them only appear as a blue
    box with a flower design in it. When I click on the blue box, more
    pictures appear, but only very quickly does a picture flash up on the
    screen, and then it disappears again.
    I wish there was a tutor here in the Tucson, Arizona area that I could
    hire who could come to our office and coach me. There are several of us
    who don't understand this Photo Organizer. Do you know of any leads in
    which we could hire a personal tutor for a morning?
    Thanks again for your kind response to my first call for help, (Miss)
    Mardty Anderson

  • How do I cut the lines to get the circular edge?

    What I'm asking is how to make my lines have that circular edge like the inside of these lines.. I'm sure its some pathfinder tool where you lay a circle on top of the lines but I can't seem to find the correct order to get this look... Any advice?  P.S. I'm still tweeking the colors and such so.... AND the larger circle is the one i was trying to use to cut the lines...

    Group your lines together
    Draw a black circle on top (black will be your color to make things invisible)
    s
    Select both
    Transparency >> make opacity mask, use these settings
    Note: there are 2 squares in the transparency palette.
    Left Square highlighted (as shown above) - edit art
    Riight square highlighted - edit the mask

  • How can i make Trend lines in numers for iPad

    Does numbers support trend lines? How can i make them?
    Thank you in advance

    Numbers on ipad does not give you the option of adding trend lines to your graphs at this time.
    Jason

  • How can I make grid lines in ICAL darker?

    How can I make the grid lines darker in I CAL ?

    Numbers on ipad does not give you the option of adding trend lines to your graphs at this time.
    Jason

  • How do I make the font automatically get larger when it come to my screen?

    I am a senior citizen and I need a large font. I found out how to make the font automatically get larger sometime ago but have forgotten how it was done. I want the font automatically get larger
    each time a page come to my screen. For example, if I am in yahoo
    email when I go into my inbox I would like for the font to be larger
    without my having to do anything.
    It seems to me that I went into "Tools" and got that done onetime but that does not seem to work now.
    Thank you.
    Bernard

    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Maybe you are looking for

  • Error exporting... Says I need to render but I already have!

    When I go to export my project as an MPEG 2, red bars appear over the timeline as if I haven't rendered and I get a message telling me that I need to render before exporting. I have rendered the project so I have no idea what the problem is. It will

  • Field in picking of raw materials

    Hi Friends, Please guide me for following senario, I am issuing raw material againts process order through picking - COIK. While issung raw material my clients requirement is that there should be provision in SAP for entering bag size and number of b

  • Problem in file contentconvertion?

    hi experts, iam doing file content convertion at sender side i need what are the parameters should be given. iam giving following parameters. 1)fieldNames 2)feildSeparator 3)fixedLength 4)endSeparator 5)processConfiguration---- because we dont have h

  • Generate new bill every month

    I am working on a payment system for a boarding house and I am having hard time to generate automatically a new bill for each boarders every month. here are the columns for my "billing" table. bill_no (primary key) due_date arrears rent_month (month

  • How to send syslog to Oracle database?

    Is it possible to directly pipe syslog entries to the database?