How do I make a photo look good in a BW newspaper

I nned to submit an ad to a newspaper it has a photo in it How do I make it look great?

In PS, change the mode to grayscale. I typically use the Auto Tone to create better black & white contrast, followed by using levels, for manual adjustments. Ink spreads more on newsprint than regular paper, so I change the dot gain to 30% (see color settings). You don't need high resolution for newsprint ... 150 ppi will suffice for b&w.

Similar Messages

How can I make a photo look like it's on a 3D Box Canvas?

Hi,
I have been scratching my head trying to figure out a way to make a photo look like it's wrapped around a wooden frame, like on a box canvas. I'm not concerned with the canvas texture, I just want to know how I can apply an effect or an action to a single image to give it depth. Any ideas?
Ross

the one i posted was a psd file using a smart object. Double click the smart object it then opens a new file, you add the photo you need, as you from the example that image is wide screen, my photo wasn't, so you use the 2nd file to make the photo fit how you want, then save and it then alters the original file, hence smart object. The background too was one, hence the perspective.
The splicing etc is ok , as you say if you have an odd one to do.
So essentially you make up the smart object once and then reuse. As you woudl need to make the canvas / canvas's into several templates for your liking, be it square / portrait / landscape or even spread over several canvases
The example i showed here is an illusion, but a pretty good one, It NOT 3d. Its done with shadows, this is the smart object.
as you see its just a perspective rectangle with the top and bottom left cropped off for the depth.
these are the psd layers as you see there are only 5, its not an action, but googling i did see an action, i think it was $35. But as i said bear in mind the amount of possible boaard canvases you may want.
2 of the other layers as you see are for the lighting and the top one is the 3d illusion effect, this particular one has the canvas effect too. I can't remember where i got this one from. I think graphic river do 3d canvas though, there will be others.
Another thing to consider if using an action is if it can do multiple boards. like ...
again just to show you before the illusion
Pretty much example like the emboss effect you can use, all done with lighting and darkness.
http://graphicriver.net/item/more-canvas-mockups/2581097?ref=riverpsd
http://graphicriver.net/item/canvas-mockups/917210?ref=riverpsd
there will be other avenues if you google

How do I make my photos look better?

CORRECTING YOUR IMAGES WITH AUTO ADJUSTMENTS
Photoshop has a lot of ways to help make your photos look their best. But as a beginner you don't have to get caught up in terms like levels, curves, or histograms. Just start with Automatic Adjustments. It gives you a great way to get your images looking really good, and you can build from there.
AUTO CORRECT COLOR - VIDEO 06:56 min.
ADDITIONAL LEARNING
ADJUSTING IMAGE COLOR AND TONE - Reference Guide
For a little more advanced understanding of what all the different adjustment settings are in Photoshop check out Adobe's reference guide.
MAKE IT SHARP - Discusson / Post
After making color and tonal adjustments, getting your photos to look sharp is a final step before sharing, posting, or printing.
PHOTO ADJUSTMENTS KEY CONCEPTS:
Color Cast
Contrast
Exposure
Lighten
Highlight & Shadow
Saturation & Desaturation
Sharpen

Hi Guys for making your picture brighter there are several adjustments which you have to make , i'll give you a walkthrough step by step. make sure all adjustments depends on your choice and satisfaction.
1. : Adjust the Levels slightly - Not much otherwise it will increase high tones in the picture. Shortcur [Ctrl + L], play with last slider in that window.
2. Adjust the curve to balcnce the tones whose values are now increased. Shortcut (Ctrl + M)
3. Adjust brightness in image Menu, make sure while adjusting brightness you take care of Contrast and Sharpness just to make picture lively not flat.
That's the major things you have to take care of, apart from this there are multiple ways which depends on user.
In case of any issue please reply or message me.
Thanks 'n' Regards
Harkesh Singh Chauhan

How Would I Make A Photo Look Like A Detailed Painting?

How would I use the "Oil Painting" feature to make a photo look like a detailed painting?

Digital Painting Tutorials with Photoshop
http://psd.tutsplus.com/category/tutorials/painting/
Nancy O.

How can I make my images look good when exporting to PDF document?

Hello! I'm struggling here with a PDF Brochure that I need to create (intended for web only, not print).
There are two images that look horrible and pixelated when I create my PDF file. I have tried everything, making the images bigger and smaller, using 72 dpi images and 300 dpi ones. Everything results the same way... It looks perfect in my InDesign file, but in the PDF it looks all damaged. Here are two screen shots, one of how it looks in the PDF and one of how it looks in InDesign.
Could you please tell me what I need to do to guarantee that the image looks good quality in the PDF? (My document is 40cmx20cm, I don't not if using cm is affecting the document).
To export to PDF I'm using the option: Adobe PDF pressets --> Smallest file size.
If you can help me I would really appreciate it!
Thank you,
Nataly.

beer and no prepress schrieb:
If it's for the web, why not export to JPEG? Why PDF?
Terrible idea. In a JPG the text will not be alive, you loose all interactivity.
And making JPGs with InDesign is not what the program is meant to make.

When someone calls....how do you make the photo show in a small square?

In the commercials for the iphone, when someone calls, the phone defaults to the wallpaper (in the commercials its most often the photo of earth) and the photo of the person is a small square in the upper right corner. When people call me, the photo I've chosen for them takes up the whole screen.
How do I make my phone look like the phone in the commercial?!
PS, I understand this question is pretty hilarious and non at all an important one.
Message was edited by: Host
To make Subject more descriptive

Not silly at all, many have asked.
In general, the answer is....
When you sync contacts from your comptuter, if you are using a Mac or Outlook 2003 (I think) or higher, then in your computer's address book, you can assign an image. Your computer makes (saves) a thumbnail of that contact with your contact data. When you sync, that thumbnail comes over to the phone.
When you assign a picture via the iPhone to a contact, it stores a full screen version of it instead of a thumbnail.
So when a person calls, if the image was from a sync with a picture that was assigned from the computer you will see what you saw in commercials. If the image was assigned from the iPhone directly, then you get the full screen view when they call.

Is there a way to make digital photos look less like video in FCP?

I know this is probably a question better suited to the Adobe Photoshop forums, but does anyone know a way to make digital photos look more like film than video in FCP? I know about watching for hotspots and such, but is there anything else I can do?
Thanks in advance,
Lloyd Lathrop

All links in the chain peddle the bicycle: in this case, I would guess your photography may suffer a bit if your colors are blown out. In assuming you have a chance to rephotograph, establish in your menu that your color temperature matches your lighting. Try K6300 for strobe, K6100 for strobe umbrella, K3100 up or down a few for tungsten: make sure your lights are at 45 degree from your photos, reflection of the camera. Your best bet is to WBalance them, and at all the same exposure, as Automatic tends to give you the neutral color and neutral value. Don't trust automatic unless you're in a pinch. You can also set in your menu a "less vivid" level, but I wouldn't trust this either.
Good luck.

How can i make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

How can I make a photo that is 10 x 6.6 to 10 x 8 without changing the image in Photoshop CS3?

I could be snarky and say change the image in a different version of Photoshop, but NO...
The only way to make a photo that is one size into another size is to change the image. You have a few choices about how to change it:
One way is to simply expand the height from 6.6 to 8 inches using Image>Canvas Size, using the default setting of having the image centered and leaving the background either black or white, your preference. This will add background color to the top and bottom of your image. This won't change the image itself, but it will change its surroundings.
Another way is to resize the image using Image>Image Size, entering the new dimensions after turning off the aspect ratio lock (resample on). This will stretch the image vertically, however, so it's probably not a good option.
Finally, you could resize the image using Image>Image Size, leaving the aspect ratio lock on and resample on, and increase the height from 6.6 to 8. This will have the secondary effect of enlarging the width from 10" to a greater width. Then you crop the resulting image back down to 10" width, which involves losing some edge areas of the image.

How do you make a photo in DW that changes automatically in a loop and needs no visable buttons

How do you make a photo in DW that changes automatically in a loop and needs no visable buttons?

I'm sorry to be so vague. I have recently found out that what I want
to do is put my images in a javascript image rotator. I have looked
this up on google and have now tried about 6 different codes. I try to
follow the insert directions but I must be doing something wrong. I
get the first photo linked up but can never make the picture change to
show the other two photos in the image folder.
Can you direct me as to how this works in dw?
Thank you so much for helping.
Pam

How do I make a photo box

When insert my photos into theme preset photo boxes my photos don’t fit the proportions of the box and get cropped. Part of the photo cannot be seen. I see how one can make a text box in Keynote, but how can one make a photo box that is different then standard dimensions within the themes? Or is it possible to change the proportions of the ones already created within the themes?
Thank you!
Pasquale M.

Never mind. I fiured it out. All I have to do is remove the mask.
Thanks for looking,
PM

When I open a photo I saved with PE13, the photo looks good. But when I click on advanced mode, the photo is all pixelated. What is the problem?

When I open a photo file I saved with PE 13, the photo looks good. Then when I click on advanced mode, the photo becomes all pixelated. Any suggestions how to stop this?

The menu selection only shows the other options if you already have a selection active; a selection made with one of the available tools like lasso or quick selection. First select with the tools, then use the menu 'Select'.

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

When I first am looking at my newly uploaded photos in "Library", a box appears near the bottom of the photo that says "loading" (the photo looks good to me), then it is more "faded" and does not look as good. Is there some setting on that I am not aware

When I am first looking at my newly uploaded photos in "Library," a box appears near the bottom of the photo that says "Loading". While it is loading, I usually think the photo looks "good". After the photo is done loading, it looks more washed out. Is there some sort of setting that I might have on (or that I need to turn on) so that this does not happen. I have Lr4. Thanks.

Hi Tracy,
There used to be a way to see if poster was new to the forum.., anyway - welcome to the forum.
As I was alluding to, biggest differences in initial display are due to:
* Camera calibration profile.
* Auto-exposure/contrast settings (for which compensations have been auto-applied in camera, but not in Lightroom).
So, choose a matching camera calibration profile (whether that's an option or not depends on your camera model - they're available for many but not all models) if you prefer one of them over "Adobe Standard" (the factory default profile).
Also, your camera covers for underexposure due to non-optimal auto-exposure/contrast setting, Lightroom doesn't, so your options are:
* turn it off in camera.
* learn to compensate manually (or automatically via a plugin) in Lightroom.
Of course, in addition to preferred defaults (alt-click big "reset" button in dev module), come up with some presets which are appropriate for your druthers and type of photography.. e.g. these will compensate Nikon ADL settings:
http://www.robcole.com/LrForumSupport/ADL%20Compensations%20%282012%29.zip
Cheers,
Rob

How can I make Web Photo Gallery with Photoshop CS6 on Mac 10.6.8?

How can I make Web Photo Gallery with Photoshop CS6 on Mac 10.6.8?

You can use Bridge to create a web photo gallery.
Here's a video that shows you how to do it:
Hope this helps!
Julia

How do I make a photo folder for different event on ipad2?

How do I make a photo folder for different event on ipad2?

These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
 Cheers, Tom

How do I make a photo look good in a BW newspaper

Similar Messages

Maybe you are looking for