How do I make a pulldown list (for a form) - which componant is best?

I'm looking to make one of my text fields a pull down list -
but can't find a CS3 tutorial. I was able to figure out how to
configure the "combo box" component to make my pull down list - but
I the component has no VAR box (in the properties or parameters
window) for me to put the variable name that I want the users
choice to go in. How do I put the chosen element in a variable to
post with my send button??

is it that noone has done this? or is it a stupid obvious
question? or is it impossible? anyone? I don't know - this is my
first flash form and google searches arent helping. help
please!!!

Similar Messages

How can i make this query run for a form

This query works fine for a sql report
SELECT *
FROM STUDENTS
WHERE given_name||' '||family_name = :P101_USERNAME
AND password = :P101_PASSWORD;
But i want it to do the same thing for a form but i dont have the option like i do for the report where i can just apply the condition to the process.
Anyone any ideas how i could do this so that when i go to the form this information is already there based on the username and password from the previous page?

Assuming that page 101 is your login form, just lookup the primary key of the student based on the values presented in the login page fields, then set and pass this value to the form page.
So you would create a process that runs near the very end of the the login processes on page 101, something like this:
declare
l_student_id students.student_id%TYPE;
begin
select student_id into l_student_id from students where given_name||' '||family_name = :P101_USERNAME and password = :P101_PASSWORD;
-- then set the value of your form page primary key field
:P1_STUDENT_ID := l_student_id;
end;I've done something similar and it works fine for me, although I haven't looked at it recently.
Earl

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How can I make a backup listing of all of my Firefox bookmarks, with complete URLs, so I can print it out from a word processing document?

== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I make a backup listing of all of my Firefox bookmarks, with completely written out URLs, so I can print it out from a word processing document? Please email me the answer-
[email protected]
<blockquote>duplicate. Locked. Please continue [https://support.mozilla.com/en-US/forum/1/727213 here] -MJB</blockquote>
== Firefox version
==
2.0.0.4
== Operating system
==
PPC Mac OS X Mach-O
== User Agent
==
Mozilla/5.0 (Macintosh; U; PPC Mac OS X Mach-O; en-US; rv:1.8.1.4) Gecko/20070515 Firefox/2.0.0.4
== Plugins installed
==
*-Netscape Navigator Default Plug-in
*Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Test Your JVM.
*Plugin that plays RealMedia content
*The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 9.0 r260
*Provides support for Digital Rights Management
*Provides support for Windows Media.
*Java 1.3.1 Plug-in (CFM)
*Macromedia Shockwave for Director Netscape plug-in, version 8.5.1
*Java 1.3.1 Plug-in

Hello.
Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

How do I create different contacts lists for two iphone/users?

How do I create different contacts lists for two iphone/users?

Sorry. This doesn't make a lot of sense. Each iPhone user should have their own cloud accounts with which to sync contacts.
The iPhone is not a multi-user device.

How do I make a boot disk for my new iMac?

How do I make a boot disk for my new iMac?

Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
     sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
     /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again. Wait for the process to complete which will take quite some time.

How can I have the articles listed for all of the asssortments?

How can I have the articles listed for all of the asssortments without any condition? Is there any customization for this?

Can you make some explanation? Is it OK if I choose "02 - Listing without qualification" as listing procedure?

How can I make more email postboxes for iPad2?

How can I make more email maps for the iPad2?

If you are on iOS 5 as your tagline suggests and it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button.

HT204053 How do I create an Apple ID for my kids which are linked to my Apple ID so that they can make purchases without me having to tell them my user/password?

How do I create an Apple ID for my kids which are linked to my Apple ID so that they can make purchases without me having to tell them my user/password?

Welcome to the community.
Unfortunately, you cannot do that. The first hurdle that you are going to face, is that mobile devices, by virtue of being prone to loss, will always require that a password is entered before a purchase of any kind is made.
If your concern about the password, is related to your privacy in regard to your mail, contacts and calendar information rather than their acces to make purchases, then the best solution would be for you to use another Apple ID for iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services.

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

How do I create an email list sign up form for my iWeb website?

Well that's the question - how do I create an email list sign up form for my iWeb website?
Could someone tell me what's the simplest way using iWeb to create an interactive option
for users to enter their email address and the info be forwarded to me so I can add to an
email list?
It would be great if, since I'm using a Mac computer & iWeb, there was a way to have the
submitted emails automatically added to a group in my Mac Addressbook.
I got this MacBook Pro in Sept 2010 so I believe that's iWeb '08 I'm using.
Anyway I'm thinking there should be a way to do this with some system involving an HTMK
Widget and an email account.
By the way this is for hosting through a 'real server', not MobileMe (which I plan to get later
when I can afford it).
Any help or suggestions would be appreciated.
Mark

Website forms require some code in a snippet and a formmail.php script on the server to process the form and send the info to the required email address. You can do all this when you switch to a "real" server.
In the meantime you can use a form or marketing service or, better still, an application like MailShoot which generates the form, handles the database and sends out the bulk emails.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

How can I make a "property node" for a VI?

Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/Amir

You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world!

How do I make a recovery disk for my Mac running 10.5.8?

How do I make a recovery disk for my Mac running 10.5.8?

Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm) in Photoshop Elements 12?

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!

Get a template from Avery. These work well in WORD.
Enhance the graphic in PSE, then import it into WORD.
Free Avery® Template for Microsoft Word, DVD Case Insert 8891

How do I make a pulldown list (for a form) - which componant is best?

Similar Messages

Maybe you are looking for