How do I make a text stretch like this?

http://www.youtube.com/watch?v=YYI9tK3o2YY
Heroes word stretches at first. How do I make that? I've glowed it like there, and blurred out like that. But I can't figure out how to strech it.
Also, how do I create those red circles around "O" at 6th second, tutorial would be nice. I'm fairly new to this program.

I can't see what you've posted due to network restrictions where I work, but the text stretch sounds like stuff you could accomplish by a combination of animating the scale and some of the distort effects (like Bezier Warp, Corner Pin, Mesh Distort, etc.)
Red circles might be particles, shape layer(s), or Radio Waves depending on how it looks (again, I can't see it).
If you're new to AE, I highly recommend you start here first: [link] Go through all of the resources that page links to. It will get you up to speed on the basics of AE which will remove a lot of the frustration a newcomer can experience.

Similar Messages

How can I make the text larger in this flashing box from Old Toad?

I'm trying to use flashing text here: http://web.me.com/phelpssculpture/Site/hands_on.html
which I copied from OldToad's site here:http://web.me.com/toad.hall/Demo_1/Miscitems.html
I can't figure out how to make the text larger.
Any suggestions?
Thanks, David

At the end of the code, you can find
document.write('You can add Blinking Text!');
insert a "size" attribute to "font" tag (eg. size="10")
document.write('You can add Blinking Text!');

How to do pop-up text box like this?

On 1-800-Flowers website home page if you hover over the thumbnails a text box pops up in the the bottom right corner, is there an action in GoLive that can do something like this? It's nice how they have everything in one cell and when doing a onmouseover it does the "shadowOver(event,this)".
http://ww22.1800flowers.com/
Thanks,
Wesley

Is it possible to just have a text message pop up in a box (table) onmouseover? Such as:
http://www.dynamicdrive.com/dynamicindex5/popinfo2.htm
I've been working with this script but it is required to have this javascript within the head.
Thanks,
Wesley

How do I make my terminal look like this?

Hello, I'm trying to figure out how this guy made so his terminal look the way it does.
I've searched around some sites but I can't really figure out what to look for as I don't know the name of the application or what it really is, just that it looks like that.
http://sites.google.com/site/gotmor/dze … xmonad.png

Rob (the dzen dev, IIRC and BTW) is probably using urxvt as a terminal. The prompt is a two-line prompt like this one, you'll need zsh for it. Also, he uses XMonad, a tiling window manager, which doesn't draw any window decorations, so there's no close/maximize/minimize buttons or title bar. Good luck getting into them all, you're in for quite a journey.

How do I make a loading screen like this one?

Okay, so for my loading screen, I want a block to appear for every 10% loaded (so they'red be 10 blocks at the end). I know how to make a loading bar, but I'm having trouble making this one. Any help? Thanks.

There are probably a number of ways to approach it. One would be to have a movieclip with 10 frames where a new box is manually added in each frame. You use the percent loaded information to tell that movieclip which frame to go to.

How can I make a smart form like this one ?

hi
according to my business requirements I need to create a PDF form which contains a table with variable number of rows (containing numbers) , so the user should be able to add or remove rows to the table as much as he needs to , and there should be a row showing the total at the bottom of that table.
I'm absolutely sure that this is possible to be implemented in PDF using javascript but I need some help to do it.
I saw a working example - the same concept I required.
>> you could have a look here -
http://www.windjack.com/PDFSamples/ListPrograming_Part1_XFAForm.pdf
any idea how I can do so ?
thank you.

hi George
thank you for helping.
I thought about the same idea >> to add fields and hide them and then show them one by one upon to user reuest , but I think that will solve just a part of the problem regarding the functionality ,,, while the formatting issue won't be solved ,,, I mean look at the form I linked to ,,, the table borders and final appearance remains the same even after adding a new row.
is it possible to do so if I used AcroForm and hide the fields ?
and how will I get the total of those variable number of rows after user finished adding rows ?
regarding the other thing you mentioned (pushing items down as new rows are added) ,,, I think I can avoid this by adding the table in a separate page ,,, because according to my business requirements ,,, rows that will be added won't exceed 30 maximum.
thank you for your time.

How do I make a text layer 3D in ps cc?

How do I make a text layer 3D in ps cc?
I know that you are able to do it on ps cs6 but I don't understand how to use the 3D features on ps cc.

Bummer. There ways to make 3D effects with 2D tools, like Free Transform Step & Repeat, or just try Google. Plugins like Alien Skin — Eye Candy 7 do Extrusion plus more effects than you can shake a very big stick at, and it is surprisingly affordable nowadays.

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

How can I make the text bigger in iCal?

How can I make the text bigger in iCal? I've looked at Preferences and View.

Sorry, did not see that you are using 10.6.7

How to make a fullscreen slideshow like this?

this is an app I found that the slideshow is what I want to make,but with original slideshow I can't make it,so I really want to know the special way to do
I am using the adobe content viewer on ipad to test my file, is it the reason? some functions are limited?
There is a small pic, when I click it,the whole page flip, then it is a fullscreen slideshow and has some special share link

argantara wrote:
anyone know if i can make a text effect like in this video: http://www.youtube.com/watch?v=gRyPj...1CA12E38536E7C
the moving one that starts in 0:23
and also the font too. can i do it in final cut pro x? or maybe iMovie? thanks guys!
You can use any font available on your system, so if the font is there, or can be bought or downloaded, just use it.
As for the effect, if you mean the text flowing from right to left, you can do it in FCP X pretty easily. Either use a title meant for that sort of movement (like Alex4D Ticker+, which is a free download), or just use a static title like Basic, enter a long text and keyframe the position.
As for the big shake, you may try the "Earthquake" effect that comes standard with FCP X.

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out?

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out? I am using a MacBook.

Press "Command P" and when the Print dialogue box comes up, towards the bottom there is an option allowing you to choose the text size, i.e: small, med, large.
Hope this helps,
NEIL

How can i make the text bigger?

How can i make the text bigger?

1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How do I make my text field automatically upper case?

How do I make my text field in a form automatically upper case?

Use the following as the text field's custom Keystroke JavaScript (choose a Format type of Custom):
// Keystroke script for text field
event.change = event.change.toUpperCase();

How do I make a text stretch like this?

Similar Messages

Maybe you are looking for