How do I make a transpose button for just one instrument in a split? (mainstage)

I work in mainstage 2.2.2 with patches using splits and I want to make an octave button for just one instruments in a patch. Suggestions?
Benny

Depending on your virtual instrument you can assign octave to a MIDI control. If you assign all of them to the same control on every track then that would be the effect, but like I said before, it really depends on which instruments you use.

Similar Messages

  • How do I make a transpose/octave button for just one instrument in a split?

    I work in mainstage 2.2.2 with patches that are using splits, and I want to make an octave button for just one instruments in a patch. Suggestions? (If I press the octave button in my keyboard, the whole split point moves, no good...)
    Benny

    An octave button for just one instrument will work for some instruments. EVB3, ESX24, ESM and a few others can be assigned. However I was unable to make it work with EVP88 and ES2. Try this example: in layout mode set up a button(or buttons) on your controller keyboard for changing octaves. In edit mode add a channel strip and select an ESX24 instrument. Select the screen control button you want to assign in the workspace. In the screen control inspector, select the mappings tab. The list below will say unmapped. Double-click on it. Select the instrument in the list. Another list to the right will appear. Select ESX24 (Sampler). In the column to the right, select the pitch folder, then select transpose. To the right, you'll see saved value, button on and button off values. This should get you started. Some of the instruments have different menus, so they'll be a little different. Have fun with it.

  • How do I make full screen button for interactive PDF

    I know in Acrobat I can set the PDF to open in full screen mode. I want the PDF to open in normal view. There will be a full screen button. Click once and the PDF expands to full screen. Click again and the PDF reverts to normal size.
    I wasn't sure where to post this but figured this is the place to start. Any advice on how to do this appreciated.
    Here's a movie of a PDF that has the feature I'm seeking:
    Full Screen Normal Screen button
    Was testing the link and I see you need QT Pro to download. Here's a zip archive of the same movie for download.
    Movie Download

    The client (a woman's club) indicated that about half the women found the full screen annoying and the other half found normal view annoying. So I made it an option. Also, most PDFs I receive such as ID magazine have the option to view normal or full.
    One thing I haven't figured out is how to get the page you're on to be highlighted. So if you go to page 5 in PDF, I would want the button for 5 to be highlighted in red. I ended up using page numbers but would like to be a bit more streamlined.
    I received a PDF the other day and at the top when the page numbers and left/right arrows are, the page numbers read
    FC, IFC, 1, 2, etc.,
    IBC, BC. I thought that was pretty cool. I imagine it has something to do with pagination in ID. Have to see if I can figure that out.

  • How to make iTunes support more than just one harddrive

    The title of this topic says it all: How do I make iTunes support more than just one harddrive? I cannot afford to buy a really huge drive just because iTunes doesn't support more than one.
    There must be a way around this! Anyone?

    I sure hope so. I run iTunes on an iBook G4 with limited space. I've got about 15gigs of music on an external harddrive. I only use the harddrive at home so I like to keep a handful of albums with me on the lappy. There should be some way to designate a primary folder on the laptop for imports, and a secondary (external or whatever) for the bulk of the library. Maybe some nifty way to do quick transfers between them within iTunes. Like a relocate function.
    Say I want the new death cab for cutie album on the laptop this week, but next week I want to swap it out with something new that comes out. It would be nice to highlight an album and select "transfer to secondary" so that iTunes can move the files for you, keep them organized, and keep track of them.
    That doesn't sound so difficult...

  • How to make a fullscreen button for Flash Catalyst?

    Hey everyone.  I really hope someone can help me with this.  How can I make a fullscreen button in Flash Professional that would make my Flash Catalyst project go fullscreen?

    I'm sorry I really don't know Flash Catalyst as much as I'd like to. Designing interfaces is left up to me, no designers at my agency use Catalyst. Though this is the Flash forum so that's as much as I can tell you. I didn't know Catalyst didn't support basic scripts (I thought I read that it did).
    Ultimately, for a very cheap price you can do something like go to http://www.lynda.com/ and buy a membership. Dirt cheap compared to what you get. They offer many courses on all this stuff and I'm sure your answer would lie in one of the (nicely broken up by subject) video training videos.
    Just searching for Catalyst brings up a bunch of courses:
    http://www.lynda.com/search?q=catalyst&x=0&y=0
    edit:
    For instance I watched the essential CS5.5 training and I saw in 2 minutes flat that when you click on a button you should have an "Interactions" panel that lets you do things. If they didn't put fullscreen as an interaction that's another thing but I'm just pointing out it's very easy to learn how to do all sorts of things in video training. If you do not want to purchase a membership there just find a video you think would have the info in it and I'll watch it and let you know if it told me how to do it, and how to do it.

  • How can I make a bootable disk for Mountain Lion?

    How can I make a bootable disk for Mountain Lion?

    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • How can I make a "property node" for a VI?

    Hello!
    If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
    I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
    Anyone have an example on this?
    In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
    /Amir

    You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
    Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
    To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
    Try to take over the world!

  • How do I make a submit button work on a mobile oriented page?

    How do I make a submit button work on a mobile oriented page?  I have the .html file and the .data file (and one other kind), but it just spins and spins and spins when I try to send the form in (for an absence).  I'd like it to work on all devices.  Help?

    HTML forms don't do anything.  You need a form processing script to gather and process form data.  Which server-side scripts does your web hosting plan support -- php, asp, asp.net, perl?  This will determine which scripts you can use with your form.
    Nancy O.

  • How can we make the save button active in standard toolbar in outout of alv

    Hi experts ,
    I am using factory method to print alv with oops .
    Cancel , Exit and Back button are active by default in Standard tool bar  in output of Report , But Save button is not active , How can i make that save button active .
    Also Pls tell me how i can make editable to the cell in output , 
    My Code is like this :
    cl_salv_table=>factory( IMPORTING r_salv_table = gr_table CHANGING t_table = ispfli ).
      gr_functions = gr_table->get_functions( ).
      gr_functions->set_all( abap_true ).
      gr_display = gr_table->get_display_settings( ).
      gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
      gr_display->set_list_header( 'This is the heading' ).
      gr_columns = gr_table->get_columns( ).
      gr_column ?= gr_columns->get_column( 'CITYTO' ).
      gr_column->set_long_text( 'This is long text' ).
      gr_column->set_medium_text( 'This is med text' ).
      gr_column->set_short_text( 'This is sh' ).
      gr_column ?= gr_columns->get_column( 'CITYFROM' ).
      color-col = '6'.
      color-int = '1'.
      color-inv = '0'.
      gr_column->set_color( color ).
      gr_sorts = gr_table->get_sorts( ).
    *gr_sorts->add_sort( 'CITYTO' ).
      gr_sorts->add_sort( columnname = 'CITYTO' subtotal = abap_true ).
      gr_agg = gr_table->get_aggregations( ).
      gr_agg->add_aggregation( 'DISTANCE' ).
      gr_filter = gr_table->get_filters( ).
      gr_filter->add_filter( columnname = 'CARRID' low = 'DL' ).
      gr_layout = gr_table->get_layout( ).
      gr_layout->set_key( key ).
      key-report = sy-repid.
      gr_layout->set_save_restriction( cl_salv_layout=>restrict_none ).
      gr_table->display( ).
    Rgds,
    Premraj

    Hi,
    1)you need to give the function code to that save in the Function Keys of that screen from the GUI Status.
    2) while filling the field catalog of that field you need to put the        
    wa_fieldcat_edit-edit = c_x.
    i.e use the edit and append to that field catalog internal table.
    for more infomation you can refer to below links:
    problem with alv edit and save
    *Edit* and *Save*  for the selected records in ALV
    solves your problem
    Thanks!!

  • How can I make music (mp3) play automatically in one Scene (NO buttons)?

    How can I make an mp3 play automatically in one Scene (NO buttons)? I have been searching the net for answers for over 10 hours with no answer... My movie will not be for the web, it needs to be portable (CD or flash drive)...
    PLEASE HELP!!!!!!!
    thank you!

    You just need to look in Help for the Sound class and possibly SoundChannel... if you have an MP3 in your library - right click it, and go to properties. Set the sound to export for ActionScript - and give it a class name - mySound will work. Then you can make it play with something as simple as:
    var a:SoundChannel = new mySound().play();

  • Realtek network card seems to be disappeared. how can i make it visible again for the OS?

    i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help

    right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
    Diego

  • How do u make a new foldler for your apps?

    how do u make a new foldder for organizing your apps

    Find two apps you want to put in a folder. Hold your finger down on one of the apps till they are all jiggling, slide that app onto the other app you want to be in the folder. Name the folder whatever you want. Press the home button when you are done.

  • How do I make a boot disk for my new iMac?

    How do I make a boot disk for my new iMac?

    Make Your Own Mavericks, Mountain/Lion Installer
    After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
       2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
    Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    Use DiskMaker X to put your installer clone onto the USB flash drive.
    Make your own Mavericks flash drive installer using the Mavericks tool:
    You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
    You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
         sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
         /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
    Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again. Wait for the process to complete which will take quite some time.

  • How i can make user defined button in standard menu.........

    hi all,
                     please tell me how i can make user defined button in standard menu.........
       regards
    vikas saini

    hi Vikas ,'
    u can do this by using PF status and setting titile .
    follow thw link for help.
    Re: To Change SAP Tiltle into some other title
    Regards,
    Amit

  • How can I make more email postboxes for iPad2?

    How can I make more email maps for the iPad2?

    If you are on iOS 5 as your tagline suggests and it's an IMAP type account then you should get an Edit button at the top of the list of folders that you currently have on your email account. If it's a POP type account then you won't get the Edit button.

Maybe you are looking for