How do I make a user index for a PDF?

Hi everyone!
I'm trying to find a plugin that will create a user index for a PDF. Not a searchable index accessible on the computer. I mean an index so that when I print the PDF, at the end there will be an index that lists every page on which the word 'blank' appears (for example.) Like one would find in a textbook.
Suggestions? I would be amazed of such a plugin did not exist...
Cheers,
Ray

Real indexes are only semi-automatic; they are based on carefully choosing words and phrases to index, then letting the app generate the index. This is almost always done in the original app e.g. Word.
A fully automatic index with everything in it is usually larger than the document itself, is called a "concordance" and is a rather specialist thing.

Similar Messages

  • How can I make surgeable bookmarks/index in a pdf?

    I have a booklet pdf'ed (32 pdf's to a booklet) and would like to make
    a surgeable index for it
    How do I do this?

    Under the Advanced Menu choose Document Processing->Full Text Index with Catalog...

  • How do I make full screen button for interactive PDF

    I know in Acrobat I can set the PDF to open in full screen mode. I want the PDF to open in normal view. There will be a full screen button. Click once and the PDF expands to full screen. Click again and the PDF reverts to normal size.
    I wasn't sure where to post this but figured this is the place to start. Any advice on how to do this appreciated.
    Here's a movie of a PDF that has the feature I'm seeking:
    Full Screen Normal Screen button
    Was testing the link and I see you need QT Pro to download. Here's a zip archive of the same movie for download.
    Movie Download

    The client (a woman's club) indicated that about half the women found the full screen annoying and the other half found normal view annoying. So I made it an option. Also, most PDFs I receive such as ID magazine have the option to view normal or full.
    One thing I haven't figured out is how to get the page you're on to be highlighted. So if you go to page 5 in PDF, I would want the button for 5 to be highlighted in red. I ended up using page numbers but would like to be a bit more streamlined.
    I received a PDF the other day and at the top when the page numbers and left/right arrows are, the page numbers read
    FC, IFC, 1, 2, etc.,
    IBC, BC. I thought that was pretty cool. I imagine it has something to do with pagination in ID. Have to see if I can figure that out.

  • How do you make Motion templates availabe for all users for FCPX?

    How do you make Motion templates availabe for all users for FCPX?

    Copy your Motion Templates folder that is in your Movies folder to the movies folder of your other users.

  • How can I make a "property node" for a VI?

    Hello!
    If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
    I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
    Anyone have an example on this?
    In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
    /Amir

    You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
    Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
    To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
    To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
    Try to take over the world!

  • HT201364 how do i make more space available for mavericks update?

    how do i make more space avaialble for mavericks update

    One place to check is the hidden Library folder under your user account. From the Finder Menu click Go > Go To Folder > Enter: ~/Library/
    IF YOU ARE UNSURE DO NOT DELETE SOMETHING
    You may be able to find refrences to old applications that you have uninstalled. There is another folder inside that one called Application Support (~/Library/Application Support/). Same idea goes here, old software folders can be safely blown away. Don't forget to empty the Trash!
    Bonus Points?
    You can use the same technique on the /Library folder aswell!
    Happy Deleting!

  • How do I change the User Agent for Safari on my iPad?  I need this for a specific website for work.

    How do I change the user agent for Safari on my iPad?  I know how to do it on my desktop version, but I need it for my iPad.

    You can rename the iPad here:
    Settings - General - About - Name
    For Siri make sure he has himself as a contact in the Contacts app then:
    Settings - General - Siri - My Info and select his contact info

  • Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

    how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

    You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
    A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
    The meta refresh is added to the head section of the html file...
    <meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
    The delay time in seconds is marked in blue and the URL to the redirect page is in red.

  • How can I make a bootable disk for Mountain Lion?

    How can I make a bootable disk for Mountain Lion?

    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.

  • How do I make multiple text bold, for example scene headings or character names?

    How do I make multiple text bold, for example scene headings or character names?

    You can do that by editing the template of the document.
    Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
    Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
    Press OK.
    Hope this helps.
    Cheers,
    Sunny

  • How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

    How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

    You can't, at least not the one provided by Apple.
    B-rock

  • How do I make a recovery disk for my Mac running 10.5.8?

    How do I make a recovery disk for my Mac running 10.5.8?

    Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 6 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version (system): 1.21f4

  • How to find the exact user exit for our requirement?

    Dear Mr. keerthi,
    can you please explain me how to find the exact user exit for our requirement?

    Hi sandip
    There is more than one method in which you can check for user-exits.The following method is used very often.
    <b>How to find the exact user-exit for your requirement.</b>
    1.     You can check the user exists using transaction SE85.
    2.     Repository Information System -> Enhancements -> Customer exits
    3.     You can search the user-exits by package name.
    4.     Double click on each exit name to check the function module exits.
    <b>The procedure to find the package name.</b>
    Execute transaction SE93 
    Enter the tcode of the transaction for which you want to check the user exit.
    Example: if you want to find the user-exit for purchase orders while changing, enter ME22n  and press display.
    You will get to see the package name
    But you need to confirm that the user exit will get triggered at the appropriate event.
    ( example: you might want some validations to be done ON SAVE of a purchase order)
    <b>Checking if the user-exit is getting triggered or not.</b>
    1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
    2.     Click on where used button. In the pop up that immediately appears choose only programs .
    3.     You will get a list of programs. Double click on the program name.
    4.     You will get the list of location where this function module user exit is used.
    5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
    6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
    regards,
    Prasad

  • How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

    Hi all,
    I am new to this community p
    i have issue regarding  the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
    thanks,

    Hi ,
    welcome to SDN.
    You can select the appropriate Customer exit accrding to the available parameters .
    The list of exits available are 
    EXIT_SAPLVEDF_001
    EXIT_SAPLVEDF_002
    EXIT_SAPLVEDF_003
    EXIT_SAPLVEDF_004
    For Example , if you want  to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
    Hope this Helps
    Rgds
    Sree
    Edited by: Sree on Jul 23, 2010 12:11 PM

Maybe you are looking for