How do I make a windows 10 recovery disk

How do I make a back-up/recovery disk for Windows 10? I made one when I bought this machine that had Windows 8.1 on it but I don't recall how I did it. Help please. Thanks in advance for the help.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you are looking for a method to make a recovery disk for your system after upgrading to Windows 10. I am happy to help with this. The method you would have used to make recovery media for your original operating system would be to use the factory installed recovery manager. As an FYI for the Windows 8 method -Performing an HP System Recovery (Windows 8)
Troubleshooting HP System Recovery Problems (Windows 8)HP PCs - Creating and Using a System Image to Restore Your Computer (Windows 8) However those tools are not going to help for making a Windows 10 image. For Windows 10, the intention of Microsoft is to dispense with recovery images, however there are still ways to make one. Here are a few pages I found that cover the options in the operating system, how to make a repair disk, and to make an image. Recovery options in Windows 10 - windows.microsoft.comHow to Create a USB Recovery Drive in Windows 10 - www.tenforums.comReset Recovery Image - Create in Windows 10 - www.tenforums.com I hope this helps.

Similar Messages

NoteBook HP 620.How can you make a System Recovery Disk on HP 620 Notebook?

The HP620 model is possible to recover the system using F11. This utility formats the hard drive and reinstall Windows 7 on the hard drive.
My question is:
You can make a copy on a DVD media operating system, such as is done with the Recovery Disk Utility on the desktop models?

Hi,
Click the Start Menu, open All Programs and scroll down the list to see if you have a folder called Recovery Manager - if you do, open it and see if it contains an applications called Recovery Disc Creator. If you have this application, double click it to launch the program which should then guide you through the process of creating a set of Recovery Discs.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Laptop dmv4 - how do i create a windows recovery disk?

If my hard drive crashes and I need a windowd CD how do I make one?

Hi,
Probably a bit late now, normally you have to create from day 1 or at least before the crash. It looks like you have to order a set from HP. Please use this:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00810334
Have you tested the HDD ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I make a window show up in every desktop?

How can I make a window show up in every desktop so when a user switches views it's still on their screen, using Xcode, Applescript-ObjC?

hi, try this:
public static void centerWindow(Window win){
Dimension screenSizeWithSpeedBar = Toolkit.getDefaultToolkit().getScreenSize();
Dimension screenSize = new Dimension(screenSizeWithSpeedBar.width,screenSizeWithSpeedBar.height-25);
Dimension frameSize = win.getSize();
if (frameSize.height > screenSize.height)
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width)
frameSize.width = screenSize.width;
win.setSize(frameSize);
win.setLocation((screenSize.width - frameSize.width) / 2, (screenSize.height - frameSize.height) / 2);
It works with following arguments: JWindow, JFrame and JDialog

How do I make New window open maximized the way it used to?

How do I make New window open maximized the way it used to?

{ Ctrl + B } opens and closes the Bookmarks Sidebar.

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?

Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.

How can we make 1 window to be displayed on top of other window in smartfor

Dear friends,
How can we make 1 window to be displayed on top of other window in smartforms as i m not getting content of a window which is placed above other window?

Hi,
There r two ways ways to display image.
1)As background image
2)using graphic node.
To display image as background.
click on page node.
choose background picture options
enter the path of the image.enter the resolution and output mode in the output attributes.
enter the horizontal and vertical positions where the image to be displayed in the page.
To display image using Graphic node.
Add a graphic node into the window where u want the image to be displayed.
In the General attribute enter the path and the resolution.
Hope ur problem get solved.
Regards,
shiva

How can i make my window 7 compatible to adobe?

how can i make my window 7 compatible to adobe?

Which Adobe software or service are you referring to exactly?

Cannot access system after dropping laptop - how to fix (don't have recovery disks)?

My wife dropped her L305-S5955 Satellite, Vista32 OS. Miraculously, case is perfectly fine, as is screen. Computer still powers on, too. At first it beeped - just now finding out that this is the "code" as to what is wrong, but we didn't know it then, and we can't remember how many beeps it was. Tried starting in safe mode and running the "Startup Repair", but the message "Windows cannot repair this computer automatically" and "startup repair cannot repair this computer authomatically"....viewing the diagnostic and repair details shows that a number of tests were run, and all of them but one were completed successfully (one failed). Successful was: "check for updates", "system check disk", "disk failure diagnosis", "disk metadata test", "target OS test" and "volume content check". The "root cause found" was "No OS files found on disk"....the "repair action" was "partition table repair" and the "result" was "failed". I read on another bulletin board that one could check whether one's hard drive was good at the command prompt by typing "chkdsk"....this was one of the first things I did, I should mention, and when I did it, it seemed to pass.
Ideally, of course we would like to have the thing working just as it did before, with all the files intact...but since we can't even get the OS running (she never did make those homemade bootable CD Roms I'm now finding out Toshiba buyers are encouraged to make), she will settle for just getting the computer working again and ultimately losing her files (we believe we have copies elsewhere of the important photos, etc)...but, I have 2 concerns:
1) I don't want to do this step of reinstalling the OS and overwriting everything IF there is ANY way to not have to do this (ie, pulling the hard drive and getting the files off some other cheap way), and
2) that there might be more than just ONE problem here (bad OS)....maybe the hard drive somehow IS also damaged...or something else is. It's true all the tests I mentioned seemed to pass my hard drive, but most of the comments on various bulletin boards I've checked give me pause here...they all seem to almost guarantee my hard drive is toast....some advise to find the make of the hard drive, go their website and download the special, specific diagnostic test software to thoroughly test the hard drive...could it be that doing this could in fact reveal a problem that other tests thus far have not..?! I'm not incredibly computer literate and Hitachi page seemed a bit confusing to me...not sure what to download. I also should mention that when I ran the "Windows Memory Diagnostic Tool" (also built into the Satellite, as one of the several recovery tools on the "System Recovery Options" page), it apparently passed that, too.
When I try to run "Windows Complete PC Restore", I get the mssg that "windows cannot find a backup on this computer"...."a valid backup location could not be found".
I am currenty trying to run "System Restore" (many different dates were shown)....but is it supposed to take a very long time (several hours or more??)....it has been going for 10 minutes already, saying it's restoring files, but
my wife said she tried this too, and that it ran for about 2 hours but she accidently bumped the computer and it stopped running (so we're not sure if it was successful or not).
Lastly, I wanted to mention that I already tried removing the back plates and checking the memory cards and hard drive to make sure they were securely seated (they seemed to be)...I even pulled them out slightly and reseated them to be sure....someone on a buletin board mentioned this can be the cause sometimes of things not loading after physical shock such as being dropped.
Hopefully this is enough info that someone might have a very good idea what the computer's issue is, and how to best fix it. Should I buy the bootable OS disks from Toshiba (someone wrote that they can be had for $25 or so?). Or can this be downloaded from Microsoft? It seems like it should be FREE, since it was already paid for when we bought the laptop! Should I use the "TOSHIBA Recovery Wizard" ? Again: if absolutely necessary (how to 100% verify this?), we'll overwrite the hard drive and lose our files, but I just want to be sure...and also that I'm not trying to load it onto a hard drive with some hidden problem.
Many thanks in advance...

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure? Help!!

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

How do I make multiple start up disks

I've partitioned my Imac(intel) for lion and leopard but can only start up in leopard. how do I make both partitions start up disks?

babowa wrote:
Frankly, I'm stumped because I didn't know that Time Machine backups are bootable?
The backups aren't, but when you restore them, the result is bootable.
And, effective with 10.7.2, if you back up to a directly-connected external HD, Time Machine copies the Recovery HD to the Time Machine drive, so you can start up from it if your internal dies.
Take a look at this site (in particular scroll down to Time Machine):
Just for future reference, since Apple's dropping web hosting via MobileMe, I've moved my site.
The new version is at http://pondini.org
I'll leave the old one "as is" for a few days, then put redirect notices on it until it goes "poof" in June.

0X4001100200001012 error with windows recovery disk

For quite some time (over a year), I've been seeing chat about this error when attempting to make recovery disks on Dell machines. Basically, a recovery disk made in windows 7 starts to boot, when tested, but then gets to what looks like the blue background
for a normal startup screen and shows an error code 0X4001100200001012 error.
Invariably, someone trots out advice about burning disks slower or running a file error check. Neither of these work. Some believe that the error has something to do with the Dell recover partition that all Dells ship with.
If one boots with the windows 7 install disk, all goes well, and one can recover an image file, so it is definitely some sort of error introduced at the windows 7 recover disk creation process.
I have seen this problem with 2, different model, Dells. An HP does not have the problem. Its recovery disks work fine. All three machines are running different versions of windows 7 64.
Do you have any insights into what is causing this error, and whether it can be remedies or if Dell owners just have to live with it? Calling Dell technical support is...well, lets just say that life is too short.
Brad Bortner
Cambridge MA

Hi,
According to your description, it indicates you have a problem with your recovery disk. It may be caused by recover disk creation process.
You could refer to the similar thread; maybe they can give you some hits:
Windows 7 repair disk error code 0x4001100200001012
windows 7 recover disk fails with 0X4001100200001012
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

[ask] how to order replacement for my recovery disk???

hallo all,
i have little problems here. how to order new recovery disk from toshiba??? my laptop satellite a105 s4384 model PSAA8U-1L502K. i'm from indonesia and too expensive for me if i must call customer care. any ssugestion for me???
regards

If you have internet service, you can order recovery media online directly from Toshiba; no need to make a phone call to anyone. Go to: www.csd.toshiba and look for the link on how to go about doing this. I've ordered recovery media from their website before; very easy to do.

How to recover Satellite A100 without recovery disk

Hi All,
I am trying to restore my A100 laptop to factory settings *without* a recovery CD via pressing a sequence of keys while booting (which should fire up the recovery partition located on the hard drive).
The truly sad thing is, I know this can be done as I have done it before butI can't for the life of me remember what that key sequence was nor can I find the article that I initially stumbled on!
I have scoured the web looking for this key sequence and all suggested solutions I came across don't seem to work.
Failed attempts so far:
- holding down 0 when powering up
- various suggested "F" keys: F1, F8, F10
- holding down delete
Note: I guess it may be worth mentioning that pressing F8 does in fact take me to the "advanced windows boot options" screen however I don't have any recovery options.
So yeh, I would *hugely* appreciate it if someone could point me in the right direction here as it's driving me insane... the fact that I have done this before makes it that much worse!
Message was edited by: Atta

> I am trying to restore my A100 laptop to factory settings without a recovery CD via pressing a sequence of keys while booting (which should fire up the recovery partition located on the hard drive).
As far as I know the A100 series has not been equipped with the HDD recovery partition!
And therefore I doubt that any key combination will start the recovery from partition!
Therefore you only chance to recover the notebook is taking the recovery disk and then to boot from it.
You can also try to install the OS from Microsoft Windows disk and then could install the Toshiba drivers from the Toshiba driver website!
Cheers

How do I make one window progress to another in swing

Ive got to design a simple quizgame interface using Swing. Its got to have a player's front-end - gives a selection of questions where the user selects one of five answers, a scoring front-end - displayed after game that allows user to enter their name and a manager's front-end - used to enter questions. The thing is I only have to design the interface. I want to have a front window that leads to the managers front end, scoreboard, and game seperatley. I also want the system to report back when the players got the question wrong or right and then take them to a scoreboard. I dont know how to keep this all seperate from the normal code in the program being written by someone else. I also dont know how to make one window lead to another etc. Please can someone help. does anyone have some code I coulkd adapt for this purpose Im really stuck!!!

Have a look at CardLayout. Rather than adding removing components, you can keep your three screens separate. Basically, you have three JPanels only one of which will be displayed at any one time. If one has textfields and you switch to another and then back, the text in the textfields will still be there.
Here's some snippets from an application of mine:
// set a 'container' panel to cardLayout. This will 'hold' the panels to be displayed at any one time
private CardLayout cardDisplay;
deck = new JPanel();
cardDisplay = new CardLayout();
deck.setLayout(cardDisplay);
// add your various screens to the 'container' panel
deck.add(logonPanel, "LogonPanel");
deck.add(newUserPanel, "NewUserPanel");
deck.add(bookingPanel, "BookingPanel");
deck.add(printPanel, "PrintPanel");
// add the 'container' panel to the contentPane
c.add(deck, BorderLayout.CENTER);
// switch the display, for example when a button is pressed, by using
cardDisplay.show(deck, "NewUserPanel");
cardDisplay.show(deck, "EnquiryPanel");

How do I make a windows 10 recovery disk

Similar Messages

Maybe you are looking for