How do I make a wired connection to my Airport Extreme that will share the same network as any wireless connection to it?

Here's the set up.
I have a cable router into the house and then an Airport Extreme connected to it. Everything connects wirelessly to the Airport Extreme apart from one computer in the same room as it, which I wired into the AE with a cable (it's a gaming PC and has no wireless).
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.

There is nothing stopping you connecting to the wireless computers if you have sharing turned on..
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.
I don't quite follow this..
If the cable modem is a router.. the AE must be in bridge mode..
So all routing is handled by the cable modem router.. and the wireless clients will all be in the same IP range as the PC is.. please check that by opening the PC command window and type ipconfig /all
Then go to one of the wireless devices and check that it also has the same IP range.. eg,, 192.168.x.x and same router or gateway address eg 192.168.1.1 and same DNS.. which is the same as the router address..
Then in the command window of the PC use the command ping to see if the other devices respond.. ping it by name or by IPaddress.
If there is no response.. windows has decided it is in a public network.. and slammed up the firewalls.. make sure your network is set as home for location.. and make sure the firewalls .. you can have multiple if you have an internet security  package are not blocking local network access.
Also remember PC and Mac in a network can take a bit of fiddling to see each other. But ping should always respond and in both directions.

Similar Messages

  • How do I make iPad add a printer using airport extreme?

    How do I make iPad add a printer using airport extreme?

    Please check this Apple Support article: Apple Support - AirPrint Setup and Troubleshooting

  • Can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option.

    can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
    Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.

    Yes, that is possible. Please check out the following Apple Support article for details on how.

  • Connecting to multiple Airport Express base stations at the same time?

    I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single internet connection behind my stereo and it's connected to the Pay TV. My options seem to be getting a new line installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
    Is this possible? Are there other alternatives?
    Many thanks

    Nate, Welcome to the discussion area!
    Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
    You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

  • I have a iMac with a built in airport extreme card.  Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

    I have a iMac with a built in airport extreme card.  Does the imac act as a wireless router so that I can connect to the internet from my iPad by tethering through my iMac?

    Depends which iMac exactly and your network setup, you can go into System Preferences and under the Sharing pane you can enable internet sharing from ethernet (or whereever you get your internet from) to Wi-Fi.

  • HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

    I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

    Troubleshoot the network as that is likely what is causing the issue.
    Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

  • Can Management Studio connect to a server that is on the same network but not on the same domain?

    Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain?  I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
    whether I am embarking on an exercise in futility.

    Hello,
    That's your issue!
    Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
    be rejected as your local computer user account is not the correct domain account.
    You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
    In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
    Edit:
    I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
    in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
    Sean Gallardy | Blog |
    Twitter

  • I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id.  I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability.  How do I do that?

    I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id.  I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability.  How do I do that?

    Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

  • How do I make a text box in a Master Slide that will have a Bold headline and Medium bullets?

    I wan't one Master box that will accomodate the above. Start bold, hit return for bullets and the font will be medium/light.
    Please/Thanks-
    Rich

    But doing it your way above, I can't edit the text in a slide. When I double clicke I get the You Have To Edit The Master message. When I check the box...all is lost...see the above. I started with a whole new presentation and went to the blank slide and copied/renamed it...Thanks for your help so far Gary...I've got Keynote '09, version 5.1.1 (1034) if that makes the difference...

  • How can I copy and paste a caption for several pictures that are all the same?

    I'm trying to understand the process of importing, labeling and organizing pictures I'm importing from my iPhone into iPhoto 11.
    So far I am importing only pictures that relate to one another; ie taken at the same event.  I have 18 pictures from one hike.  I'd like to label each of those pictures the same; ie "hike at Bear Creak 2/15."  Can I copy and paste the same label to all 18 pictures?  How would I copy and paste?
    There are lots of You Tube videos on the subject of iPhoto and that's how I learn best.  If you know of a really basic one to watch I'd appreciate it. 
    I think I have to take a class at the Apple Store on this basic organizing because it's really escaped me in the 9 months I've had this Mac (switched from PC.)
    Thanks,
    Ginny

      I have 18 pictures from one hike.  I'd like to label each of those pictures the same; ie "hike at Bear Creak 2/15."  Can I copy and paste the same label to all 18 pictures?  How would I copy and paste?
    Ginny,
    select all 18 photos at once in iPhoto on your Mac and then use the menu entry "Photos > Batch Change"
    That will change the titles or descriptions of all photos at once.
    -- Léonie

  • Two airport devices wired to netgear router - can they both work on the same network?

    Hi
    I have a Virgin Superhub 2 cable router. I would like to extend the wireless around the house using existing cables and have an Airport Express (v2) upstairs and an AirPort Extreme (v4) downstairs.
    Both would be connected individually to the netgear based router. When setting up the second airport device, can I asked it it extend the existing apple network I would have set up or must it be a different one. If it will extend, will it be wireless extend or wired as in both apple devices are wired to the same netgear router.
    Thanks in advance
    Matt

    See...I have a ipod nano which on being connected to itunes7, I'm able to make my own playlist&delete or download songs at my own will. But when I connect my ipod mini to my i tunes(on the same computer) ...it(only) just updates my mini but after that if i wanna make changes to the playlist on my mini or delete anything...I can't. It only works with my nano but not with my mini.

  • Why can I not connect to my MAC from a PC on the same network

    I have a correctly formatted external HD mounted on my MacBook Air (Mac OSX version 10. 7. 5. Lion) and can access it without problems from my MacBook Pro, but when I am trying to access it from a PC (both Windows XP and Windows 7) the PC can "see" my MacBook Air on the network, but cannot connect to it - the PC connect window continues to ask for the password, even I am sure I am writing the correct password

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have a MacBookPro, an iPad and an iMac using a wifi connection with an airport extreme base station. Lately I am having trouble with connection time outs. Right now the laptop and ipad are connected okay but the iMac has timed out and I can't reconnect

    Please help. Just the last week or so (maybe since Apple released a new software update for my Airport, I keep getting kicked off the net and can't reconnect - it doesn't even show my wifi network in the list of available networks. I am considering resetting the airport as detailed in the manual. If I do this will it act as a new one and can I set it up as from the beginning. My Mac is running OSX 10.6.8 and if I try to use the airport setup assistant it tells me i can't use this version of the app with the version of my OS (because I have upgraded my OS ) I assume
    I get a message saying my network requires a WPA password and when I put it in it says connection timeout - meanwhile here I am on my laptop and connecting okay to the net that way - so strange.
    If I connect directly to the computer I have a good connection so it is not my ISP
    I am 64 and a woman and I thought I was reasonably savvy having had Macs since 1992. This has me stumped and I really would like some advice - otherwise I think I'll just go iout andf buy a new airport.
    And just so you know . . . I have a smart TV and it is connecting to the net okay!

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • How can i find a library that is on the same network as me so I can share?

    There are multiple people on the network that share iTunes libraries, but the certain one I'm looking for is not showing up. Is there anyway for me to search for this specific library? I am using the most recent version of iTunes.

    There is no way to search for a shared library. If the computer on which the library is being shared is on the same subnet as your computer, it should appear automatically. If it's not appearing, perhaps the library isn't really being shared or the computer is on a different subnet in which case you cannot connect to it; iTunes Sharing does not work across subnets.
    Regards.

  • How can I connect two macs in the same network?

    Both are connected to the same network. One via ethernet and the other via Wifi (Airport Extreme). Both share the same Internet conection. I have followed instructions for files sharing. I can access only the computer linked to my home network via ethernet, but not the other way. It does not found the server address provided in file sharing by the computer conected via Wifi. Any clue? Can it be that the IP address of the Wifi conected is DCHP?

    Are you using Connect to Server or Shared sidebar in the Finder? What OS X versions do the two machines run?

Maybe you are looking for

  • SQL7008 after terminating ENDJRNPF process

    Hi All, I'm a newbie in DB2. In an attempt to disable journaling to prepare for a client copy, I executed: ENDJRNPF FILE(R3<SID>DATA/<file name>) JRN(*FILE) However the process took a long time, so I kill the pid for ENDJRNPF. Now I'm getting SQL7008

  • JSF Navigation and page access out-of-order issue

    I've been searching the web and the forums for an answer to what I thought would be at least a well-documented issue with JSF, but have been coming up empty. (which to me might mean its not an issue and just a lack of understanding on my part) Lets s

  • 2lis_04_p_arbpl datasource expand

    Dear all, I add WEMNG (GR QTY) and MEINS( Uom) from LBWE to 2lis_04_p_arbpl  ,now when i see the data in RSA3,it does not show me data for these two fileds though it has data I remove unhide fileds also.

  • Error while refreshing cache

    Hi , My scnearo was working fine . Suddenly i am getting this error in moni error while refreshing cache if any one ever faced this problem plz let me now thanks amit

  • Moving from 32bit XP to 64bit Win8 - is this OK as a Licensed CS 5.5 user

    And can I use the 64bit version of CS 5.5 without incurring any additional costs. Basically my system died and I am getting a new one. Thanks! Nick