How do I make all the clips on one track the same volume?

I am trying to raise the volume equally on all the clips. One would think that it would be as simple as turning up the volume knob on the audio mixer on the track with all the clips, but of course not, that would be TOO simple. When I raise the volume, it keeps jumping back and forth as if I asked it to key frame the volume knob. How can I perform the simple task of raising all the clip volumes to the same volume ?

VideoHero
I do not recall what version of Premiere Elements that you are using nor the computer operating system on which it is running.
So, I will generalize for now, referencing version 12...
1. Assuming you have several Timeline audio clips that you want with the same volume...select the first, go to Adjust Tab/Adjustments Palette/Volume Panel expanded and adjust the Volume.
2. Then right click the that first file (with the adjusted Volume), select Copy.
3. Select all the other audio clips that you want to have the same Volume level. Then right click anywhere in the selection and select Paste Effects and Adjustments.
Does that work for you.
If you have video with its audio linked to it, depending on the specific circumstances to be discussed later, you might want to unlink the audio and video beforehand.
Please review and let us know if that works for you. Any questions or need clarification, please do not hesitate to ask.
Thanks.
ATR

Similar Messages

  • How can I make all my clips the same size

    Right now I have them in the time line and have used for all of them the option scale to frame size, yet some get full screen size and some don't, I want them all the same size, what can I do?
    Greetings

    Select the clip in the Timeline, open the Effect Controls panel, use Scale to increase or decrease the size of the image.
    Peter Garaway
    Adobe
    Premiere Pro

  • How can I make two video clips within one frame?

    OK, I have two video clips. I just need to shrink one video and put it in to the corner of my other video. How can I do this?
    Thank you for your help!
    Message was edited by: Stevamundo

    Hi
    Picture in picture - is no a standard option in any version of iMovie.
    iMovie ? - 6 You'll need a third party *plug in* to do this: (iM'08 no go at all)
    • Stupendous software http://www.stupendous-software.com
    • GeeThree http://www.geethree.com
    • cf/x. http://www.imovieplugins.com
    • Apple http://www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
    • http://www.imovieplugins.com/fxhome.html
    *You also can do this with QuickTime-pro.* But You need the disipline of an angle.
    Quoting:
    Klaus1 writes: As Bengt says, you can do this with Quicktime Pro. Here is how:
    Organize the video clips and/or stills that you want to superimpose on to your main video clip, by having these in separate, individual iMovie projects (no matter how small). It helps if these are in the exact length/time you want later.
    Now start with the clip in your iMovie project on to which you want to superimpose one of more smaller video clips or stills. Lets call it Main Clip. Export this (share) to Quicktime Pro in DV (full quality). make sure it has the same aspect as before (Quicktime tends to default to 4:3. If you want 16:9, read on).
    In Quicktime, with this project open, select File ~ Open File. Select the iMovie file (in your movies folder) of the first clip/still you want superimposed. This will open in its own QT window. Select Edit ~ copy. If it is a movie clip then select all ~ copy (or you will only get one frame!). Switch back to the Main Clip window, and click in the scroll bar where you want the extra clip/still to appear. Choose Edit ~ Add to Movie.
    You can repeat this as many times as you like, if you want to build a 'Video Wall', i.e. have several superimposed clips/stills on the same Main Clip.
    Do not worry that the new clip overlaps or covers up the Main Clip, at this stage.
    Choose Window ~ Show Movie Properties. The Properties Dialogue appears.
    You will see a list of video (and audio) tracks. Track one will be the Main Clip, track 2 your new added (superimposed) clip. Click track 2, then click visual settings. From the Scaled Size pop-op menu, choose percent. Then type 50 into the first box. If Preserve Aspect Ratio is turned on you won't need to type 50 into the second box. You have made the pasted footage appear at one quarter its original size. The inset is now hugging the top-left corner of the Main Clip. If you want, you can type numbers into the Offset Boxes to shove it away from that corner (there are 72 pixels to the inch).
    If your original Main Clip was required in 16:9, unclick (de-select) Preserve Aspect Ratio, and type in the relevant numbers in the two boxes, in Video Track 1.
    PAL (for Europe):
    Standard DV (4:3) 788 x 576
    DV Widescreen (16:9) 1050 x 576
    NTSC (for the USA):
    Standard DV (4:3) 720 x 528
    DV Widescreen (16:9) 874 x 480
    This will not affect video track 2, but if that is also wanted in 16:9 repeat for that track.
    You can superimpose, 3, 4, or more such 'overlaps' on the same clip, and spend a happy afternoon tapping away for each track in the Offset Boxes until you have got them all in the right place! You can even overlap them, if you can remember (or note down - hire a secretary to take notes) which track you want on top etc.
    Save the completed QT file. Import the completed file into a new iMovie project. Import this into the original iMovie project, substituting the old clip you copied to QT as Main Clip for the new fancy clip you have made.
    Have fun!
    END OF QUOTE !
    *My way:* When I started to need more than iMovie could offer I took a look into
    FinalCut Express and counting the sum of all Plug-ins needed and FCE I found out
    that FCE is a real bargin.
    • color-correction
    • blue/green screen
    • 99 video and audio tracks
    • slightly rotation a clip eg 1 deg - nice horizon
    • slightly or major scale up or down
    • and of cause Picture in pictures
    And so much more.
    Yours Bengt W

  • How do I upload all my clips in one video? iMovie 10.0.4

    I've been trying to upload my gaming videos to youtube. There are more than one clip and i've edited some of them. I am fine until when I want to upload it to youtube, It only uploads the selected clip. When I deselect them all it tries to upload the first clip only. I've tried joining the clips but it won't let me, it just remains grey when i try to select join clips.

    do you try to upload an Event (=no luck) or a Project (=only way to go)?

  • How Can I Play All Songs On My IPod Touch at Same Volume?

    I have an IPod Touch 5th Generation which I bought this year. I also have a 4 year old  Apple IMac desktop with ITunes version  11.0.4(4).
    I have the latest version of OS Mountain Lion.
    I sync songs from ITunes on my IMac desktop to the IPod Touch. Songs play back at different volumes on the IPod Touch.
    I want them all to play at the same volume.
    Almost all of the songs in my ITunes on my IMac were downloaded from many different music websites,
    very few from the Apple Store.
    I also have an IPod Nano 5th Generation which I bought a few years ago. I copied songs from ITunes on my desktop to my IPod Nano.
    But I did not sync them. Just transferred or copied many of the songs from ITunes, without syncing.  The ITunes songs appear to play at equal volume on
    my IPod Nano but not on my IPod Touch. For Settings on my IPod Touch, I set Sound Check to On.
    Regarding ITunes Preferences (ITunes is on my desktop IMac):
    The Sound Enhancer and the Sound Check are both checked, and have been checked for a long time. Therefore all the songs
    on my IPod Touch should all be played at the same volume, shouldn't they, since they were synced from ITunes.
    Doesn't the Sound Check on ITunes control that?
    If they all play on the same volume on my ITunes, shouldn't all songs play on the same volume on my IPod Touch?
    I noticed today the Crossfade in ITunes Preferences on my IMac was not checked. I thought it had been, but maybe I accidentally unchecked it one day.
    I checked it today but was not sure what time to put on it. I put the time in the middle, which is about 6 seconds. Not sure if this is OK.
    I'd like one song to come on just about when the previous song ends. Any suggestions? (There does not seem to be a Crossfade option
    in the ITouch Music Settings). If I use Crossfade in ITunes, will it crossfade when I play the IPod Touch, since it synced the ITunes?
    Also, I have the music setting for EQ on my IPod Touch set to OFF. I assume I don't need this, but please let me know if I do.

    Settings>Music>Sound Check will HELP to normalise the volume of your music but it only averages it out.

  • How do i download all my music in one from match cloud

    how do i download all my music in one from the itunes i match cloud?
    i have a new computer and its linked to my apple TV 1st gen.
    Because most of my music libiary is on the cloud it wont copy over all my music.
    can you help?
    anthony

    Nevermind...I did what it said to do in the article and it worked!

  • How do I make all clips the same brightness?

    I'm editing a four-minute video with ten clips, opening and closing titles, and a graphic. It's essentially a talking head presentation. The sound from a lapel mic is good as is the framing. But we used available lighting coming through a large window. So the top of the frame, the white background, is a little darker than the bottom. Also some clips are somewhat overall darker than others.
    Is there a way that I could make them all the same brightness? In the Adjust panel I can select only one clip at a time to change the lighting. It would be neat if there was an action that would make all the clips equally bright.

    Tommyvincent wrote:
    Is there a way that I could make them all the same brightness? In the Adjust panel I can select only one clip at a time to change the lighting. It would be neat if there was an action that would make all the clips equally bright.
    Yes, there is.  Assuming you have several similar clips, you make all the adjustments you think they all will need to one clip.  Then, select the adjusted clip, right click, "Copy".  Select the rest of the similar clips, right click and "Paste Effects and Adjustments".  All the clips will now have the same adjustments.
    Make this an early part of the work because ALL effects and adjustments are applied.  After this first and primary adjustment is made, more adjustments can be made to individual clips.
    Bill

  • Importing tape into Imovie 11. How do I import all the clips as one long clip?

    How do I import all the clips as one long clip? I have 45 min of footage and I want it as one long take I can edit in Final Cut ProX. When I import, all the clips are split up when the scene cuts. I just want the 45 min in one long video.

    iMovie will import the tape as if it is direct from the camera. It will sense the scene breaks and put all the clips in chronological order.
    If you want to import it as one long clip, I suggest you load the tape into the app that you edited the tape with. Then export it out as a QuickTime movie in the DV codec. You can import this MOV file into FCPX or iMovie.

  • How do I make all the music in my ipod 5 the same volume? I already used sound check but it does'nt work.

    How do I make all the music in my iPod the same volume because sound check doesn't work and i have all the latest firmware.

    Nothing more you can do.

  • I have recently updated my computer and it has imessage on it but sometimes they dont send them to my phone how can i make all the messages be on both?

    i have recently updated my computer and it has imessage on it but sometimes they dont send them to my phone how can i make all the messages be on both?

    See Here  >  About Messages
    Using Messages  >  http://support.apple.com/kb/HT3529
    Troubleshooting Messages  >  http://support.apple.com/kb/TS2755
    Mac 101: Messages
    http://support.apple.com/kb/HT5395

  • I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

    I have the IPhone, IPad and MacBook, IPad and IPhone share the same Apple ID and Icloud storage. Cannot make ID Change on MacBook as it says the ID is already taken. How can I make all three match?

    The problem is that all services are bundled with your Apple ID ([email protected]):
    Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
    also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
    and the iTunes Match services.
    (I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
    If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
    iCloud (Settings > iCloud) with her account (e.g. [email protected])
    and
    iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
    In this case she gets access to your library and could use the same iTunes Match account.
    (See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

  • HT4527 i just copied some music from my external hard disc to my macbook . how can i make all that music be shown in my iTunes without having double copies of the music??

    i just copied some music from my external hard disc to my macbook . how can i make all that music be shown in my iTunes without having double copies of the music??

    Hello Sudhanshu Mishra,
    Thank you for using Apple Support Communities!
    You can have iTunes reference the content where ever it is on your HDD without copying the content to the iTunes library, thus using twice the space.
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    From: Adding music and other content to iTunes
              http://support.apple.com/kb/HT1473
    Additionally if you want the content to then ALSO be located in your iTunes Library folder so everything is all kept together nice and tidy, use this:
    Consolidate your files in the iTunes folder
    Depending on how you imported items into iTunes, some items in your library might be stored in different locations (in another folder or on another hard disk, for example).
    You can consolidate all the files in your library in the iTunes folder—for example, to make it easier to move your library to a new computer.
    Choose File > Library > Organize Library.
    Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
    To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files in the folder ‘iTunes Media.’”
    From: help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePath=English.lproj# itns2999'
    Cheers,
    Sterling

  • Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Did you move to iOS 8 via iTunes?  Your photos should all be on your iPhone 5s without any issues even if you updated via WiFi.  The update should have no impact on your photos other than to have moved any photos in your former Camera Roll to your Photos.  When opening the Photo App you should see Photos and Albums available at the bottom of the screen.  You can also look at Settings>General>About and looking down the list your should see the word Photos and a Count at the right.  This count should represent all of the photos in your iPhone.

  • How do you make a movie clip face the mouse

    How to you make a movie clip rotate so it's always facing the
    mouse?

    thanks a lot! I got the code to work, I just modified it a
    bit.

  • Some users don't appear at the login screen when restarting, only upon logging in as a user who does appear, then logging out. How can I make all users appear on the initial list?

    I've inherited a previously used early 2011 13-inch MacBook Pro at work.
    I now have my own account on the computer, however the account does not show up on the list of users to log in as in the start up log in screen. It will only appear if I first log in as one of the users who do appear, then logout. The background also changes between these two log in screens - the start up one is white whereas after logging out of one user it's the brushed steel background. My account has admin powers.
    Anyone have any ideas how I can make this account also show up on the start up screen?
    Thanks in advance for any help.

    I do think it has something to do with FileVault.
    Under System Preferences -> Security & Privacy -> FileVault I try and click "Enable users" near the bottom (after unlocking with an admin password). If I do this from my own account a green check mark appears next to my name, but upon clicking "done" I received this message after a brief loading period:
    The following users weren’t allowed to unlock this disk because an unknown error occurred: (myusername).
    I tried going into the root account and performing this same process, the first time System Prefences unexpectedly quit, and the second I received the same error as above after clicking the "Enable User..." button next to my account and trying to hit "Done".

Maybe you are looking for