How do I make automator automatically turn off the volume when I shutdown?

I want to make automator automatically run when I click the shutdown menu. How do I make it do this?

dpna wrote:
Yes it is a proper cover
If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
I'm going to quote from another post elsewhere ...
Are you using a genuine Apple cover or another third party cover?
It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
If you do have a genuine Apple cover then there is something going wrong here....

Similar Messages

  • How can I turn off the volume when I turning on my computer?

    Hi,
    how can I turn off the volume when my imac is turn on? later if i use it to listens music or whatever I can turn it on manually
    I don't want to sound that indicates the computer is on
    thanks
    adaltam

    Hello:
    Simply hit the mute key on your keyboard (found over the F10 key).
    Barry

  • I can only text through ordinary message when not connected to the internet to someone, but when I am connected, it is automatically assumed as iMessage. How will I text ordinarily without turning off the net? Thank you!

    I am from the Philippines btw. What I meant is, I cannot text someone ordinarily when the net is turned on, and it assumes to be texting through iMessage. How will I text someone without turning off the internet in an ordinary way, not in iMessage? Thank you.

    I Tried that already, but if i turned it off, I cannot send an imessage to people I want to text through imessage. There are people in my contacts that when I text, it is automatically as text message, while there are some that when I text, it is through iMessage automatically, and I just want through text message also. And for the latter, I still need to turn off the wifi in my phone for them to be texted through iMessage, which is more hassle.

  • How can I turn off the volume limitor on my ipod nano?  I want to play it with a docking station, it is no where near as loud as an old 4GB ipod!

    Hello, please can you tell me how to turn off the volume limiotr on my ipod nano?  I want to play it on a docking station and it just isn't as loud as I want it to be.  An old ipod is much louder.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • Is there any way to turn off the volume rocker of the side of the iPad?

    Is there any way to turn off the volume rocker of the side of the iPad?
    Please help!!!!!! I forever have the square with the volume control on my screen because my volume rocker does not work.

    You could try a reboot:  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad should restart.  If that doesn't get rid of the volume control box on your screen, it's time to make an appointment with the Genius Bar at your Apple Store, and they can send your iPad off for service.

  • My ipod nano 6 keeps turning off the music when i touch the sleep button

    Hi my Ipod nano 6th keeps turning off the music when I touch the sleep/wake button.
    What should I do?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback when the screen turns off to save battery power. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    i

  • My 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

    I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
    Good luck!

  • How do I get automator to turn off App Nap?

    I am trying to get automator to turn off app nap and then after a period of time turn it back on. So far what I have done is put the following string of code into a shell script but I think I am doing something wrong...
    defaults write NSGlobalDomain NSAppSleepDisabled -bool YES
    Any suggestions?
    Thank You!
    Peter

    Read this:
    http://support.apple.com/kb/TS5185

  • HT1430 How do I turn off the data when I am not in a WiFi location? I noticed that I am using data when the phone is "on" and I am not in a WiFi situation, but not on the internet. So, how do I turn off the data?

    How can I turn off the LTE data when I am someplace where there is not WiFi and I do not want my LTE running up a bill? I have tracked my usage and realize that the LTE is being used even when I am not using it, just because the phone is turned on.

    Merely being on should not use any data.  You must have something running - something using push notifications, or push email, prhaps?
    So, you can either track down what is using the data and change it, or you could go in and disaple cellular data in your settings.
    One other thing to check is
    Settings -> General -> About -> Diagnostic and Usage data -> set it to "Don't Send"
    Settings -> Restrictions -> Location Services -> System Services -> turn all these "OFF" (this will not affect how you use your phone at all, but will stop any outgoing location information being sent periodically back to Apple).

  • How to avoid turning off the iPhone when its locked.

    Hiya,
    Wondering if there is any settings to avoid turing off the iPhone when its locked. When the phone is locked with passcode holding the power button on the top provides the option to turn off the phone. So is there any way to restrict it?
    Thanks,
    SaN

    No.

  • Turn off the text when viewing

    What is up with this and how does one turn off the text.  Adobe Reader after scanning

    Adobe Reader doesn't scan. Acrobat provides links to drivers that your scanner provides to let it appear Acrobat is doing the scanning. A scanner will make a picture of the page you are scanning. It cannot turn on or off text. If there is something you do not want scanned you can use the scanner driver to not scan that part of a page. You can also use Acrobat's Redaction tool to remove any text or picture from the scanned image.

  • Can i turn off the vibration when i plug my phone in

    Does anyone know how I can turn off the sound and/or vibration that occurs when I plug my charger into my phone?

    Hello,
    There is no possibilities to do that, even if you remove the vibration in silent mode on the iPhone's settings.
    I would eventually advise to put your EarPods in when the sound is ON so you won't hear or feel any sounds/vibrations.
    There is no other way to avoid the sound/vibration for stopping.

  • Help! Turning off the volume 'duck ****'

    Does anyone know how to turn off the 'duck ****' noise you get when you adjust the volume on the mac?
    Please tell me there is a way?
    Thanks
    Lee

    Go into System Preferences/Sound and uncheck the box that provides audible feedback.

  • How do I make my iPad turn off when the screen is covered?

    My old iPad would turn off when I closed the cover but I cannot find how to make the iPad air turnoff in a similar fashion?

    dpna wrote:
    Yes it is a proper cover
    If it is an APPLE COVER, perhaps it's not the one for that model. But, if it's not an Apple cover, then maybe the manufacturer hasn't set up the magnets the way they are supposed to be.
    I'm going to quote from another post elsewhere ...
    Are you using a genuine Apple cover or another third party cover?
    It's the magnets in the cover which activate the lock/unlock feature to appear in your settings. In earlier iPads you could slide a magnet down the side of the iPad to find where the magnet activates and turn the feature on.....Apple have now changed how this works with the iPad Air. Whereas before there was only 1 magnet positioned in the cover for earlier iPads, it is now thought there are 2 with alternating polarity.
    So if you want this feature you will need to buy an Apple cover or wait for third party manufacturers to get their magnets in the correct position.
    If you do have a genuine Apple cover then there is something going wrong here....

  • Hi, i turned off the announce when alerts are displayed feature on my macbook pro but it is still saying "alert" when my battery is running low...how do i turn that off?

    HELP!!!!! The "alert" thing keeps talking and wont turn off!!!!!

    It sounds like Voice Over is still on.
    In any case, under System Preferences > Accessibility under Voice Over click Open Voiceover Utility... and then make sure under Verbosity > Announcements that "Automatically Speak Text in Dialog Boxes" is unchecked.

Maybe you are looking for

  • Dunning in ECC 6.0 UC_OBJECTS_NOT_CHARLIKE Dump

    Hi, We are doing an upgrade from 4.6 to ECC 6.0 and when we execute transaction F150 for dunning we get the following runtime error does anyone have any idea what might cause this or how to resolve it. Runtime Errors         UC_OBJECTS_NOT_CHARLIKE D

  • How to get the size of 'MyComponent'  when it is used in another place ?

    'My component' is JPanel based ( for example) I find problems to use the real size of MyComponent ( the size it has at the destiny) In 'Initialize' this.getheight gives me the size of the component by itself Must I use 'paintComponent' to know the re

  • Wireless accesspoint needs to be reset every morning

    We do have 2 airport extreme stations that needs to be reset every morning before users can connect to it. We connected the airports to a UPS to see if the problem disappeared but it is still there. One of the lights of the airport extreme is off (le

  • User experience question for High Availability

    Hi Experters, Not sure whether this is right forum to post this message. If anybody has already captured user experience for the failover environment, will appreciate their help on this. I will give overview of environment. Using PowerHA for ASCS/SCS

  • Best Practice: Application runs on Extend Node or Cluster Node

    Hello, I am working within an organization wherein the standard way of using Coherence is for all applications to run on extend nodes which connect to the cluster via a proxy service. This practice is followed even if the application is a single, ded