How do i make bigger files ? 40 mins on 1 DVD is too small..

have 2- 5 min videos, daughter playing etc, i want to make big files for a mobile dvd player, all the files i have made are real small and only 12-15 files.
how do i add the small video files together as one larger movie ?
how do i get more on a dvd with i movie ?
4.3 gb disk with 40 mins of video...
please help.....

And, just for you to know, iDVD is not concerned with the size in GB of any movies. The only limiting factor is the time-length of all the content to go onto the DVD disk. For single-layer DVDs, the limit is 120 minutes; double that for dual-layer disks. As long as all your videos do not exceed these limits, you can put any size videos into your iDVD projects.
Also, the time-length affects the burning preference for the project. By default, iDVD sets it as "Best Performance." This setting is for project of less than 60 minutes. The other setting options are "High Quality" and "Professional Quality." These are for projects of 60-120 minutes (single-layer). The burning processes are slightly different, with the PQ involving more passes, thus taking a bit longer. It is supposed to be better quality, but I don't think most people notice on their DVDs.
Just be sure you have the Preference setting for the length of your project.

Similar Messages

How do you make a file private ?

I've uploaded a file to Adobe cloud to allow others to see it. If I want to add other files for specific people to see how do I make that file password protected?

In Adobe Acrobat you can secure PDFs with certificates:
Acrobat Help | Securing PDFs with certificates

How will u make the file not to be process by other?

how will u make the file not to be process by other? thanq

Hi Krishna,
File locking is not supported.
Look at the OSS note 821267 for File Locking / Incomplete Processing.
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

How do I Make cr2 files to jpeg in photoshop elements 10? [was:files]

How do I Make cr2 files to jpeg in photoshop elements 10? And why are my raw photos looking really pixilated?

mgills2013 wrote:
What is the difference between mRaw and sRaw?
http://cpn.canon-europe.com/content/education/infobank/image_compression/file_types_raw_sr aw_and_jpeg.do

How can i make cotrol file which have conveyor and ?

how can i make cotrol file which have conveyor " to move the bottle and slider " to fill the same bottle ?
i attach my control file.............
" Science is came....not come "
I study Mechatronics Engineer
skype : t_alhowaiti
Attachments:
convyer.ctl ‏16 KB

Jeff·Þ·Bohrer wrote:
billko wrote:
ThaerAL-Hwaiti wrote:
i want to make a production line which move a bottle on a conveyor and fill it .
That's all good and fine, but what have you tried codewise? Let's see what you have so far and we can go from there.
The easy answer is "an assignment" and a desire to pass the course without actually needing to read and comprehend information.
I as trying to be diplomatic about it.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

How do I make ALL files with RTF extension open in Nisus Writer?

How do I make ALL files with RTF extension open in Nisus Writer? Right now it opens in Text Edit. I don't want to change it for one file. I want all files, regardless of how many or where they are.

select a .rtf file in finder and enter command+i. in the resulting popup go to the "open with" section and change the app to open it to Nisus Writer and click "Change All".

How can i make doc file in ipad

how can i make doc file in ipad??

I believe that Pages for the iPad is capable of creating documents compatible with MS Word's .doc format.
Best of luck.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

How can I make a bootable Mavericks SD Card or DVD?

How can I make a bootable Mavericks SD Card or DVD?

Download the Mavericks install app, then run Apple's built-in Terminal command (included with the install app), where Untitled is the name of your USB stick:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
More details in http://osxdaily.com/2013/06/12/make-boot-os-x-mavericks-usb-install-drive/

How can i make a file a .jar again?

Ive opened a minecraft.jar with Archive Utillity so i can change pictures but ow can i make a file a .jar again?

You have not said what your target size is nor how many photos you have or how large on screen. Nor what version of Pages you are using. Nor whether it is just for looking at on screen or you require a good print.
Reducing file size is a combination of things that can be done with no loss of quality:
1. Crop and reduce resolution of images in a 3rd party application, Preview will do.
and those that will reduce quality
2. Menu > File > Reduce File Size
3. Menu > Share > Export > PDF > Good (Good is not very good unfortunately)
Use vector (drawing) pdfs in place of bitmap (photo) images can save considerable size. Preparing photos in other programs also allows you to control the image quality of jpegs and tricks like slightly blurring them prior to saving.
Pages is not very efficient in this regard and there are limits to what you can do. Lots of images, covering a lot of the page does add up to a bigger file whatever you do.
Peter

How can I make Keynote files read-only (eg: to share with students)?

I would like to share some keynote files with students, and I would like to set them up as read-only, so that the students can tap the screen, read my presentation, but not alter it. I've tried to set the files up as read-only on my iMac desktop, but when I load the file onto my iPad, it's still editable.
Any ideas re: how to make Keynote files read-only?
I've tried to export the files as PDF and load them into iBook, but some of Keynote's basic "build" functions won't work this way. Specifically, I have files set up with questions and answers (ie - a question appears, and you have to tap the screen to see the answer, but this "build" function seems to disappear when I get it to show up in iBook).
Any ideas how to make Keynote files read-only? I am happy to use another program, but I want the students to tap the screen in order to see the answer to a question.
Thanks!

as long as $PATH is set, you shouldn't need to reconnect them (i think). if you send the list of apps through | awk -F '/' '{print $NF}' | that'll strip the path
/edit: added the "(i think)" part
Last edited by brisbin33 (2009-06-02 21:33:06)

How do you make RealPlayer files?

I need to make RealPlayer files of my FCP movies. I downloaded Real Export Plug-in for Mac OsX from Real Networks. It is supposed to enable Quicktime Pro to export RealPlayer files. However it gives me a "export failed" message.
Anybody know about this?
I am running Panther and Quicktime 7.0.4. Real Export is supposed to be compatible with Panther but not Tiger.
I have Cleaner 5 and 6 but it seems like Cleaner won't convert to RealMedia unless I'm also running OS9, which I am not. I am looking into this further.
Bottom line: how can I make the RealPlayer files?
All help greatly appreciated.

Bogiesan,
Are you running Tiger? I didn't install the Real Export Plug-in on my Tiger machine because RealNetworks said it was incompatible with Tiger. If you are running Tiger then maybe I should take the plunge.
Thanks.

How Can We make video files of images in Flex

Hi
Can Any body tell me how can i make a video file of images in flex.Please tell me wether its possible in Flex. to combine images to make a video file.
Regards
Vineet osho

Ok,
Let me take this example.
Supposing A vendor with 3 AP open items, B vendor with 2 AP open items.
When making a payment proposal, SAP shows only 2 lines, namely, collected by vendor code.
Looking at DME file, however, it shows 5 lines which means all individual open items.
What we want to make is 2 lines in DME file, which means grouping invoices by vendor in a DME file.
Hope it makse sense.

How do i make psd files transparent?

How do i make psd images transparent when I drag and drop the layer onto the stage on flash cs6?
For example the way iv been doing it up until now was saving as a psd then going to file import to library on flash. This is very very time consuming and would be much easyer if i can just drag and drop the photoshop layer onto the stage, but the problem is that the image gets a white box around it and isn't transparent when i do that.
Is there an option in photoshop or flash to fix this and make the background trasnparent?

Reminds me of Yoshi from Mario Bros
I know what you'd like to do but as the first reply mentioned, you can't do that. Until Photoshop is updated to copy with transparency intact to the Windows clipboard, you won't be able to do that. The reason I linked and showed a screenshot of the software GIMP is to prove that it's a Photoshop limitation, not a limitation of Flash or the Windows clipboard.
Knowing that fact, there is no way for you to copy/paste drag/drop from Photoshop directly into Flash.
Cartoon animating is essentially identical to how most games work. You create one large master image that contains all the possible variations of your subject (a face, a car, etc) and import that into a game. You do the same when animating, only you're keeping them all separate instead of one image.
Knowing your experience with Flash is small and growing, I'm not going to make the most optimal recommendation. I'll stick to 2 things I mentioned before but elaborate on them.
1) Save your assets to actual PNGs with transparency, then import into Flash.
The reason I'd recommend this the most is because of Flash's update function (which I will explain) and it can be automated a bit (also will be explained).
So I grabbed a Yoshi sprite sheet and say I made a new pose as you mentioned. In Photoshop I'd then select and copy this new pose alone, with transparency:
As you know, once you do that you can bring up a 'New Image' dialog and it will already have the size of your copied pixels (with trimmed transparency):
You can see the size is correct and the preset is clipboard. After that you just paste your new image in and turn off the background to gain transparency. Then you save it out as a separate file. I always use Save For Web for a pinch of file size optimization and overall control:
Again, I realize this is a lot more than you want to do, but all of this can be automated which will be explained after making it virtually a single button push operation.
Now we have the image as a separate new PNG image with transparency intact. This image should be imported into Flash's library:
Now you both have a physical separate copy of this pose in a PNG file (which can be useful for many reasons) and Flash can use that file with it's built in update command for very quick changes.
Now say you touch up a pose a bit. I'll make it really obvious and change the entire hue. You make your changes in Photoshop, follow the same process (even making size changes to the original image), eventually overwriting the PNG you created for that pose:
Now in Flash, all you need to do is use the Update function. Right-click on the image in your library, select Update. Because this is a file with a physical location, that is all that is needed to change the image in Flash:
The power in this is if you make sweeping changes to dozens or hundreds of PNGs, you can do this in one command in Flash. Select all the changed images and hit Update and all your changes will be done at once. You can't do things like this when you copy and paste directly into Flash.
That said, almost all of the steps above can be automated using Photoshops Actions panel. No need to reinvent the wheel, Actions are fully explained here:
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7448a.h tml
I would recommend recording the action after you make your marquee selection around what you want to save as a PNG. Record right up to Save For Web and stop there. Then in the future you press the hotkey you assign and it will extract your selection, open a new document, paste it in, disable the background for transparency and bring you to the dialog you can name the image in. That's pretty easy and automated. Then just import into Flash and enjoy the benefits.
2) Use Photoshop to create the assets, then a different program to copy/paste into Flash
Not ideal to need 2 programs, however if you really want to copy and paste directly into Flash, this is the way to go. Get any program that can read the PSD file format, open your PSD in it. If you have enough RAM this really shouldn't be an issue (PS and GIMP side by side, same file open):
As you make changes to the PSD, just hit reload or revert in your "copy with transparency" supporting program, copy what you need, paste into Flash:
I'll explain some of the advantages of the previous workflow if you'd like but I think this is enough information overload for now.

Not sure if Mavericks is worth the effort of downloading and I prefer mountain lion. How do you make a file in Finder.

I am not sure if Mavericks is much better than Mountain Lion as an OS. The maps part was okay but I could not view the map as shown on the apple website, there was no 3D. How do you create a file in Finder on the MacBook Pro.?

Duuuuuuuuuuuuuuuuuuuuuuuude!!!!!!!!!!!! YOU DID IT! I cannot believe it!
I changed "Move To Trash" to "Move to Trash" and selected a file. I had lost all hope, so I took a minute to prepare myself for yet another moment of deep frustration. Then I pressed F10, and bang! the file was trashed!!! It took me a couple minutes to actually believe what just happened. Thank you so much! If I could, I would "like" you as many times as I can physically hit the "Liked" button!
PS: what the heck is wrong with Apple though??? Wrong instructions, incorrect help instructions on their own site. The chances of figuring this out before having a nervous breakdown were like one in a million (approximately, I did not actually do the math). Last week, the keyboard and the trackpad stopped responding on my brand new macbook pro for a couple hours. I was not the only one with this problem. Apparently, this was from a design flaw, which means it could happen again at any time. iMovie doesn't work. TextEdit keeps crashing all the time. Emptying the trash can take hours.
Since 2000, I bought a PMac G4 Quicksilver, a used PMac G3 Blue, a used iBook G4, a used Pismo PBook G3, a used Graphite iMac G4, a used iMac G3 (green, 233MHz I think) and I already had more problems with this brand new macbook pro than will all the other macs combined... For such an expensive machine, with 16GB of RAM, that's a little dissapointing, especially from Apple. Maybe I'm just not lucky.
Anyways, thanks again! Best moment of 2014!

How do i make bigger files ? 40 mins on 1 DVD is too small..

Similar Messages

Maybe you are looking for