How do I make DVD with clips from 2 different iMovie files?

For some reason, my movie clips got imported into 2 different files. And now I can't make a DVD using clips from both. Should I reimport the movies? And if so, how can I make sure they all get imported into the same file?
Thanks!

I apologize, but I am still unsure of what you mean...
"When I open iMovie, at the top of the screen, it says: iMovie: 4-22-2005. But there is also another file with another date."
There is another file where? What kind of file? Is this a clip you are talking about or another project? Another file within the project? On the clip shelf? A completely separate project folder?
"How do I ensure that it just goes into the same file/folder?"
When you open a project and then import clips they all go into the same folder of that project by default and by design. iMovie is not designed to allow you to import some stuff here and some stuff there. When you create a project, a folder system is setup and in that main project folder is a media folder. All your work files (video footage, audio files, etc.) get put into that folder and no others.
Patrick

Similar Messages

How do I make two audio clips from different mics sound the same in premiere?

I have a video I am working on. we used two different mic and camera options. One is a lavaliere mic that was too hot and picked up a lot of fuzz, and the other was an on board mic that was just a little echoey from the office walls. I found that some clips were better on different versions. so I want to put the two different sets next to each other in video and make the sound be the exact same. That way no one notices the differences in audio.
Any help is appreciated.

Hi. Although not perfect, I'd add an audio mixer effect and adjust the highs, mids & lows on both of them to help their audio, respectively, sound more similar. Often when I shoot, my Boom mike (backup) is much fuller sounding than the lavs. are. Lavs are inherently lacking in the low end, and the boom is often too hot on the low end. So I would add Audio Mixer effect, and lower the low end on the boom slightly, and highten the low and mids just a bit on the lavs. Even taking a little highs off the lavs makes it sound a bit more like the boom.
As far as echo is concerned, you probably can't do to much about that unless you have an external graphic equalizer/limiter. Lot's of times I just add some music in the background, which helps a lot to hide echo from the mics.
Finally if you tape/record/film in a location that has lots of background noise like, background people, cars or rain or wind or general white noise "hiss", then you should record a minute or two of the location without any dialogue. This is is known as "Wala" recording. You can add a little of this to your whole track, or just on the mike track that doesn't seem to pick up the ambient sound, thus making it sound more like your other mike.
I hope this helps.

So I bought a video on iTunes, how do I make it compatible with iMovie so I can edit it and make my own video? If I can't do this, then how do those people on YouTube make videos with clips from TV shows and Movies?

So I bought a video on iTunes, how do I make it compatible with iMovie so I can edit it and make my own video? If I can't do this, then how do those people on YouTube make videos with clips from TV shows and Movies?

Videos purchased from iTunes cannot be copied.

How to burn a dvd with both Mac and Windows files

I have a DVD that has both Mac and Windows formatted files. When the DVD is mounted only Mac formatted files show. I want to burn a DVD copy containing both formatted files. How do I do that? Thanks in advance.

Correction! It is a CD and there are two partitions with Mac and Windows files.

How to make one movie from different imovie files?

I have 12 imovie files that I am trying to put together as one movie with 12 chapter markers.
How do I do that?
Thanks.

...import all 12 movies in it and mark the chapters...
very hard to imagine a less space consuming way...
you can drop the movies directly into iDVD…
you get a videoDVD with 2x6 (I wouldn't place 12 chapters on a single menu) "chapters"...

How can I make iDVD with a H264(.mp4) video file???

I've got two files which is in .mp4 format, I tried to edited it in iMOVIES but it came up with only audio no video. So then I tried to put that two .mp4 video directly into iDVD, but it also didn't work. There is no problem when I try to view .mp4 file in quicktime player.
So if I have to changed the format to .avi , which software would be best?? I want to keep the quality of the original files but I have heard so many times that after changing the file format, the quality may not be the same as before.
Please, masters, help............

OK, here are the results of my experimenting:
ffmpegX wasn't happy making the conversion and froze. I didn't try 'playing' with it to make it work. I guess I can't recommend this approached for you.
I DID have success creating a DVD from your file using Roxio's Toast Titanium 7 (you must have version 7 to do this).
It was a slow process - your 0:03:46 clip required abount an hour on my 1.33 G4 PowerBook. The process might have been slightly slowed because in addition from going from MPG-4 to MPG-2 (and converting the audio), it was also converting from PAL to NTSC (the source video is 25 fps).
In my opinion, the results looked pretty poor when viewed on a TV. About what I'd expect starting with a small (662x384 pixel), highly compressed MPG-4 image file.
Stick to viewing them on your computer with the VLC Media Player. You'll be a lot happier.

How to remove the iPhoto video clips from the iMovie Event Library

Hi,
The new iMovie took a couple of hours to index my iPhoto video clips. That didn't bother me so much as I have 2564 video clips in my iPhoto library.
However, when I launch iMovie, it now takes approximately 30 minutes to be ready for use.
Is there anyway to de-register the iPhoto video clips in iMovie?
I'll switch to only importing the clips I want to work with as iMovie does not appear to be written to handle a large quantity of video clips efficiently (for the G5 cpu anyway).
Perhaps if when selecting "iPhoto Videos" in the Event Library, it would first show the video clips divided into Events as with the new iPhoto approach. Would surely be quicker to scroll through. Scrolling through the video clips is far to slow.
iMovie won't even playback the video clips without pausing every couple of seconds. My iPhoto library lives on my internal drive.
Regards, Tony.

Please don't cross post in these forums

How do I make a phone call from my mac with yosemite?

How do I make a phone call from my MacBook Pro on the Yosemite operating system?

The following quotation is from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
There is more information in the link, including supported hardware and that you must have Settings > FaceTime > iPhone Cellular Calls set to on on the iPhone.
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Make a call
To make a phone call on your Mac, iPad or iPod touch tap or click a phone number in Contacts, Calendar, or Safari.

Without Encore ... how do I make DVD's with menu etc.? AMEPresetProber

I'm having all kinds of Encore problems and Adobe doesn't support it anymore. This one is an error 'scc\AMEPresetProber' and I can't even open a new or existing project without Encore crashing.
I don't want to sign up for Adobe Cloud as my other CS5 programs are all working fine and don't want to pay Adober for life with a cloud version.
My question is...Without Adobe Encore, how do we make DVD's now? Microsoft Movie Maker??

1st - provide details so someone can help with your current Encore... if you are Mac, did you recently upgrade to 10.9 Mavericks?
I do NOT use these, so have NO idea if they will do what you need
Encore alternative http://www.sonycreativesoftware.com/dvdastudio
-or http://www.deskshare.com/dvd-authoring-burning-software.aspx

How can i make a still frame from imovie 11 using mpeg streamline clip

How can I make a still frame from iMovie using mpeg stream clip?

See my User Tip here.
https://discussions.apple.com/docs/DOC-3231

Make a new DVD with subtitles from original DVD

Hello, i am trying to make a new DVD with subtitles from an original DVD a friend has sent to me in order to add the .*** file with the titles done with Jubler. My question is : I am converting the video ts folder of the original DVD with MPEG Streamclip to get a format that is possible to import with iDVD. so which is the best conversion for iDVD?

My recollection is a bit fuzzy, but I think an older version of Quicktime (6?) still supported text tracks with transparent backgrounds. You might have to dig around to verify that, and it's an option, but here's a whole different approach...
What do you think about using software like SnapZ Pro to record the version playing on your screen? It is taking video screen shots, so it won't be confused by the additional video layer (of text).
John

How can I make dvd from imovie..

Hi I recently wrote this question in another topic but
it seems that it is better to re-question in a new thread..
I am using imovie for some years but to make dvd, I use Toast 6 not i dvd, because mine doesn't burn dvd.
So far I needed to make a DVD of only a short movie (15 minutes) so what I did was:
import the finished movie to quicktime (as high quality DV movie format) and then
burn DVD in Toast.
And with that format, 15-minute-short movie ended up 4 GB.
Now I need to make a dvd of a longer film (50 minutes) and if I want to
make DVD with this way, in order to make a quicktime mpeg4 format it takes 270 minutes..
I have always had difficulties to understand the right format for DVD; I know that I have to make mpeg2 (right?) for DVD, but in i movie, if I cann't use idvd, what should I do??
I hope that anyone can help me with this, maybe silly, question..
wishing all a good day,
minobu

ciao minobu,
Canada still asleep , Germany on duty
In Toast (as in iDVD) you have two options: burning a dvd or produce an image of a dvd...
a) ... is simple: finally you get your disk (physical)
b) ... the whole computing process of making a movie into the file system of a video-dvd happens, BUT it end not in using the burner, but storing the "image" (=files and data structure) of the dvd.
your Mac is able to "mount" such an image; after that you see a disc symbol on your desktop! (as you would have inset a real dvd....). you can "open" that virtaul sic with Apple's dvdplayer to check, wether it looks like you wished. and you can have look about its size finally, you can force Toast to "transfer" that image onto a real dvd-r
as said, that could be done with iDVD5/part of iLife05 too........
probably it is not on your iBook, because the installers checks, wether a burner is installed/your iBookG3 doesn't fullfill the minimum specs... even with Toast producing a DVDs on a iBook G3 is a very long time consuming process...

How do you make one long clip camera import FCPX

Does anyone out there know how to make one long clip from a DV camera import in FCPX??? Why the designers thought it was a good idea to chop the clips up during import is beyond me...

You're expecting one continuous take to import as one single clip, right?
From my experience with DV-format cameras like the Canon HV20, it's not unusual for there to be enough of a discontinuity (control track??) to create two or more successive clips when importing, dropping a small number of frames between clips. This could be caused by dirty heads or a tape that has been used more than it should.
A string of separate takes should import as separate clips, I believe.
Hope this helps.

Premiere Elements 4.0 - How do I change all the clips from 5 seconds to 2 seconds in length?

Premiere Elements 4.0 - How do I change all the clips from 5 seconds to 2 seconds in length?

Christine,
The Duration of Stills is set with Edit>Preferences to the number of Frames required, where ~ 30 Frames = 01 sec. of Duration.
Unfortunately, the Duration cannot be reset (Edit>Preferences) for material that has already been Imported. The procedure is to Delete those Imported Stills, and make the change, then re-Import them, and you will get the Duration that you have reset.
The only other option at this point is to manually Click-drag on the Head, or Tail of each Still in the Timeline, to adjust the Duration. I do this with the Info Panel open and visible to make it easier. Personally, unless I am well into the editing process, the Delete, change and re-Import option is my choice.
Good luck,
Hunt
PS - the ability to alter the Duration en masse for Imported Stills in the Project Panel has just been added in PrPro CS5. I do not know if it has been added in PrE 9 though.

How do i make it so iTunes plays the music files from where i have chosen to store them?

how do i make it so iTunes plays the music files from where i have chosen to store them as opposed to it scattering copies of my files into a myriad different folders based on the albums they came from when i'm not even interested in keeping whole albums?
I recently converted myself to mac after having been a windows formatted person since the beginning of time. I use last.fm and the client scrobbler only supports iTunes on the mac (scobbling since Nov 06 and i'm now heavily dependant upon it as a means of discovering new music) - if you don't know what that means then take it for granted i have no option other than to use iTunes as my media player whn using the mac. And almost immediately upon using iTunes i was filled with horror.
My tale of woe as follows: I copy all my mp3 files to folder X on my new mac. I copy my simple playlist in to that same folder X. The simple playlist simply lists all the files in folder X in the order i want to hear them in... simple right? And what happens the moment i start playing my simple list? Well you probably all ready know; itunes throws copies of all those files in to the air, scatters them to the four winds so each of them fall into a little folder of their own representing the album they might once have come from. I don't keep whole albums. For me the 'album experience' is a ruse to trick one into listening to weaker material. I only keep the concentrated goodness. I only put up with albums in a previous lifetime because in the days of vinyl i had no other choice apart from spending hours compiling mix tapes. Now i am liberated from these restrictions and have been for the 15 or so years i've been using a computer to listen to music. Until along comes iTunes forcing me backwards in time, frog marching me back into the past.
That simple list i mentioned is my one and only playlist. This single playlist has been evolving for 15 years as tracks are added and removed and their position in the list changes because that song sounds amazing when heard after that other song whereas hearing this song after that song would be like pouring custard over your sausages (for me shuffling is an abomination). And so here is how i've managed this list and managed synchronization of said list and listed files with my mp3 player (currently a Zen).
Adding a new file: After deciding that song is a keeper i will copy it into that simple folder that holds all my music and drop it in to a position on the list i deem most suited for it. Incidentally over this entire 15 year (i'm pretty sure it's been around that long) my media player has been winamp but for the reason previously mentioned i am unable to use winamp in mac world.
Removing a file: fortunately winamp has an option to simultaneously remove a file from the list and the hard drive. And naturally so because after all if i no longer like a song then i want it expunged completely from life or at least from my hard drive and playlist. In the brave new world of iTunes i have to remove from the list there then delete the file from where iTunes copied it from and then the place iTunes copied it to.
Editing the list: drag an item in the list to it's preferred location and select to save it as i would for any other file using any other application... well desktop type application as opposed to one that uses a database as its primary means of storage.
Syncing with the mp3 player: copy drag drop playlist file from the simple folder on the hard drive to the simple folder on the mp3 player as i would for any other file. And then also copy drag drop the most recently created files from simple folder on hard drive to simple folder on player after having ordered them by creation date so as to make it easier to select the most recently created. After a while the mp3 player will fill up with the files no longer on the list so i will delete all files from player then re-copy all flies from simple folder on hard drive to simple folder on mp3 player.
I do not make changes to the list on the mp3 player so synchronization needs only to go one way: from laptop to player.
So all very simple. Apart from editing the positions of files in the list everything is managed by copy drag dropping and deleting files using windows explorer.
But i'm in a mac and circumstances have forced me in to the corner of using iTunes. And this whole iTunes situation is terrifying for me as over the years i've heard horror stories about it deleting all of someone's music files. Perhaps this may have been by using the software incorrectly but even so, the very fact that it appears possible for this to happen simply by using the software incorrectly and the fact that it happens with some degree of frequency given the number of reports of this happening that i have heard of over the years on music discussion forums fills me with dread that i have to now use this software. And given the software's blatant disregard for the user's choice as to where to store his/her files it's no surprise that this happens. The software is pointlessly doing dangerous things with my data. Please make it stop.
Please can i just at the very least make iTunes play the music from the folder i have chosen to put my files in and not copy those files here there and everywhere without my say so? Thankyou.

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

How do I make DVD with clips from 2 different iMovie files?

Similar Messages

Maybe you are looking for