How do I make dynamic text look static while the HMTL tagging is enabled?

Hi all,
I am using flash 8 with AS 2.0.
I have a dynamic text field where I am setting it's text value through a variable. Now, I need this dynamic text field content to look like static font on runtime. I tried embedding the text field but that makes my file so heavy and most importantly, it disables the HTML tagging on the text field.
Please suggest me on how to make a dynamic text field content look static on runtime while the HTML tagging is enabled and working fine.
Thanks.

I am sorry. But the attachment was not intended for what you
thought my friend.
It was there so that there are no confusions for what I mean by look of dynamic and static text fields.

Similar Messages

How do I make a text box solid if the value in the field is greater than 0 and do this for all recor

Hello,
I have several text boxes on a document, and wish to make the boxes either solid or visible if the value in the field is greater than 0.
I am using an excel file for the data, each cell with either 1 or 0 (true or false).
Any help would be appreciated.
Thanks,
BJ

Yes, I also sent an email regarding this problem.
I am using XNET to write a custom device for PXI-8516 LIN card.
I've attached a couple snippets showing where I've tracked the problem.
The only error that I've seen comes from the XNET Wait vi in the timeout snippet. I believe that error occurs because frame queued in the write snippet is never transmitted by the LIN card.
Attachments:
Timeout_Error_Snippet.png ‏22 KB
XNET_Write_Snippet.png ‏24 KB

Make Dynamic text non-clickable

Hi Guys,
I need to learn how to make dynamic text non-clickable, like
those in loaders. Any Ideas...?
Thanks in Advance

you mean non-selectable. :)
you'll find this option in the properties panel. with the
text tool selected (or with a text-box selected on the stage)
search the properties panel for a button showing 'Ab' where 'b'
looks like it was selected. that's the button controlling if the
text is selectable or not.
got it? (i can post you a screenshot if you can't find it) ;)
adam

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

How do I make my text field automatically upper case?

How do I make my text field in a form automatically upper case?

Use the following as the text field's custom Keystroke JavaScript (choose a Format type of Custom):
// Keystroke script for text field
event.change = event.change.toUpperCase();

How can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

how can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

That model MBP gives you a choice of cards to use – one at a time. it is not designed for them to run in tandem - splitting up the workload.
Russ

How do I make a text layer 3D in ps cc?

How do I make a text layer 3D in ps cc?
I know that you are able to do it on ps cs6 but I don't understand how to use the 3D features on ps cc.

Bummer. There ways to make 3D effects with 2D tools, like Free Transform Step & Repeat, or just try Google. Plugins like Alien Skin — Eye Candy 7 do Extrusion plus more effects than you can shake a very big stick at, and it is surprisingly affordable nowadays.

How do you make multi cameras look the same?

So I have three cameras used in the shoot. Lighting is from regular track lighting most commonly found in ware shouse type venues. Cameras 1 & 2 are one foot off the ground pointing ever so slightly up. Camera 3 is shooting from 15 feet off the ground pointing down. How do I make them all look the same in post production? When I try to increase the brightness in camera 3 it looks washed out. When I try to dim the brightness in 1 & two it looks dark and shadowy.

Ideally you start with this:
• 3 identical camcorders.
• Manually set the white balance in each camcorder onsite before doing a shoot.
• Make sure the 'program' setting is the same in each camcorder, e.g. they should all be "Auto" or "Spotlight" or "Portrait" etc. - the one you prefer.
• If possible, manually set the exposure in each camera
What probably happened is your camcorders' auto exposure did its job and the cams pointing upward were underexposed because the sensor was affected by the overhead lights.
If your clips' brightness & contrast are reasonably close, start by applying the Color Corrector filter to each clip. Use the Visual control (you will see the button when you apply the filter) and then use the Eye Dropper tool to set the white & black points in each clip. If the cameras weren't too mismatched this may be enough to correct the brightness mismatch. I doubt you will get a perfect match but hopefully close enough that it's acceptable.

I am making a slideshow. How do you make a text slide?

I am making a slideshow. How do you make a text slide? I have not found a tutorial.

If you want to superimpose text on a slide: simply click on the text button on the tool bar
If you want to have a blank slide with just text: create a black (or whatever colour you prefer) slide and use that behind the text.
Regards
TD

My new iphone won't flip sideways, how do i make it so it will use the wide screen?

my new iphone won't flip sideways, how do i make it so it will use the wide screen?

Is rotation lock on? If it is, you'll see most of a circle at the top of the screen with a lock in it.
Double click the home button, swipe the bottom row left-to-right, look at the leftmost icon. If there's a lock there, click it. Then click the home button.

How do I make a hands free call with the iphone 4s?

How do I make a hands free call with the iphone 4s? I have a bluetooth car device and when I try to talk through it (as I did with my old phone) to call someone it does not work. so far only hte last person called is redialed.

That is a carrier-based service. So first you have to make sure your service contract includes that feature.
It usually also includes Call Hold. So you call the first party, put them on hold, call the second, then reactivate the first. But only if your carrier allows you to.

How can I make signature darker when I print the report?

I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
I used file link and OLE, both did't make it.
Thanks.

No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

How do I make my apple id connected to the app store?

I got my sister's ipod touch. I have gone to settings and logged off her apple id account, and logged onto mine. Now, when I went to update my apps in the app store, they asked for the password to my sister's apple id. How do I make my apple id connected to the app store?

- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

How can I make my imap email not take the emails off the server?

How can I make my imap email not take the emails off the server when I delete them on my iPad?
Can anyone help me whith this?
I tried to use the pop account in gmail settings but that was downloading all my emails sice 2008 ( more than 300 deleted emails tha can only be found in the deleted email box), when I just have 5 or 6 email in the inbox .
How can I solve this????
Thank u all...

I have the same problem. For years I have been able to delete emails from my ipad and have them remain on the server so I can deal with them on the desktop. Now they get deleted from the server when deleted from the ipad, which makes the ipad unless for reading mail.
You answered to delete the email account on the ipad and set up a new one as a pop. I have made many attempts to do that in the incomping mail server "Host Name" field but it always errors out even when the host name is equal to what my desk top has. So I can see no way to change away from IMAP. I started with an ipad 1 and now have an ipad 2.
Rachael

How do I make dynamic text look static while the HMTL tagging is enabled?

Similar Messages

Maybe you are looking for