How do I make front and rear outputs on my Audigy sound the same. Rear is dull and quie

Hi?My subject line says it all really, I have installed an Audigy Platinum and have a two chanel amp and speakers connected to one port and my headset + mic connected to the other. I've swapped the headphones around to isolate the problem and its quite clear that the rear output is quieter and the quality is dull. I've reinstalled all the drivers with the latest ones from the soundblaster site but its made no difference at all. All audio setting are as default so far as I can tell, I've checked the fader and thats dead centre. Any Ideas. Toad??

You're a star m8, I was just in that area I hadn't found that tool until just, its looking like the CMSS settings that are causing the prob. It seems best when speakers are set to 4/4. and CMSS is set to CMSS2 or Off. I just set everything to default with all effects off.Seems pretty good now thanks for the help. The card has quite a few differences and improvements on my previous SB Li've Platinum 5., I thought it would be almost identical but its better than I thought with little subtle improvements here and there to both hardware and software. Glad I installed it now, it was just going spare at work and would never have been used again. thanksToad

Similar Messages

HT1349 we both have the same Iphone, how can we make sure that we both have different account on the same network?

my partner and i have the same models of Iphone. how can we make sure that when she logs on to our home network, it recognises her phone and doesn't down load to my phone?

Did you try to rename one of them? iTunes: How to rename your device
iTunes remembers the settings for each phone when you sync, even if both phones are called "My iPhone".
So make sure to set it up like you want to, after that iTunes will do the rest.

How can I make Firefox 4's "File Upload" window start in the same directory across all sites?

I upload webcomic image files to multiple sites every day--the same file to multiple sites--through the "File Upload" window that comes up in Firefox when you click on a site's "Browse..." file request field.
In Firefox 3 (under Windows XP), when I used Firefox's "File Upload" window to upload files, the "File Upload" window would come up showing the last directory from which I'd uploaded anything to ANY site.
In Firefox 4, on the other hand, the "File Upload" window comes up showing the last directory from which I last uploaded to that specific domain.
I'd like to know if there's an about:config setting--I couldn't find one when searching for "file," "upload," or "dir"--to revert to the Firefox 3 behavior. The reason is that now in Firefox 4, because I typically upload two files to four different web sites per day--one file to all four sites, then later in the day, a second file to all four sites--I have to switch from the first upload directory to the second upload directory in each of the four "File Upload" windows for the second file, whereas in Firefox 3 I only had to do that once. Here's how it used to go:
In Firefox 3:
# "File Upload" for file 1 at smbhax.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at drunkduck.com: desired local directory is already selected.
# "File Upload" for file 1 at smackjeeves.com: desired local directory is already selected.
# "File Upload" for file 1 at comicfury.com: desired local directory is already selected.
# "File Upload" for file 2 at smbhax.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at drunkduck.com: desired local directory is already selected.
# "File Upload" for file 2 at smackjeeves.com: desired local directory is already selected.
# "File Upload" for file 2 at comicfury.com: desired local directory is already selected.
and here's how it goes under Firefox 4:
# "File Upload" for file 1 at smbhax.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at drunkduck.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at smackjeeves.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 1 at comicfury.com: have to browse to the local directory where the file is located, since it's a different location than file 2 from the previous day.
# "File Upload" for file 2 at smbhax.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at drunkduck.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at smackjeeves.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
# "File Upload" for file 2 at comicfury.com: have to browse to the local directory where the file is located, since it's a different directory than file 1.
So basically, where under Firefox 3 I only had to browse through my directories twice per day to upload two files to four sites, under Firefox 4, I have to browse through my directories eight times per day to accomplish the same thing.

You can use the Remember Password bookmarklet: <br />
https://www.squarefree.com/bookmarklets/forms.html#remember_password <br /> ''Has worked for me when I have needed it to save a password on a web site that used autocomplete=off.'' As far as the Bug that '''cor-el''' linked, I can't remember ever running across a website that did it like that.
Or, you can use the Saved Password Editor extension, which includes a means of manually adding Username/Passwords to Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/60265

My imac continuously recovers the same email. How do I make it stop? So far it has recovered the same email 55 times.

My imac has recovered the same email 55 times. It won't stop. I've turned it off and on, but that doesn't help. It spends all it's time recovering the email, but it doesn't load any of my fresh ones. What do I do?

Hello,
>Are all those passwords with their matching URLs stored somewhere on my Mac?
Yes, that IS the Keychain.
Mac OS X 10.4: Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
And finally...
Keychain is no longer able to update itself when I upgrade an application...
http://unsanity.org/archives/2007_01.php
>Makes me kind of uneasy, 'encrypted' or not. I'm always skeptical of the "trust me..." approach to computer security.
But if it didn't you be bothered to put in hundrefds of usernames & Passwords a day most likely.

How do you make separate ICloud accounts for people who all use the same Apple ID?

Me, my brother and mam all use the same Apple ID (i.e. this one. I'm not Debra) so is it possible to create three different ICloud accounts? I only want my music, pictures etc to go to my IPad, IPhone and my account on the Mac. If it's not possible, is there a way to see all the activity from this Apple ID in one place and split it into three different ID's easily? Thank's for any replies

Welcome to the Apple Community.
You can't have 3 accounts with one ID.
If the reason you want to keep a single ID is so you can share music and apps etc, then you should be aware that the iTunes account and iCloud accounts are different accounts, you can all share an iTunes account but have different iCloud accounts (each iCloud account would have its own ID).

How do I make FF4 look like FF3.6? I want the same buttons in the same places.

I want the FF4 UI to look exactly like my FF3.6 UI. I want the same buttons in the same places.
I have reverted to FF3.6 until this issue is solved. I do NOT like the new UI.

You can make Firefox 4 look like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6

How can I make a line appear on each page in exactly the same position?

Hello,
I have created a simple line at the top and bottom of my page that I would like to be replicated on every other page in the document.
Is there anyway in which I can make it recognise that I want these two lines to be used on every single page?
Thanks,
Matt

Select the lines > Format menu > Advanced > Move Object to Section Master

How do I make my iTunes library available to other users on the same pc?

I would like my wife to be able to access my iTunes, but from her user account. That's possible, isn't it? Right now her library just comes up empty. I have Vista 64. What would be the easiest way to do this? Thanks in advance.

See if this helps: iTunes: How to share music between different accounts on a single computer

How do I make Word and Excel Documents readable to PC users that cannot open them

How do I make Word and Excel Documents readable to PC users that cannot open them

Be sure to save them in the Office 2007 format as .doc or .xls files.

How do I make one (and only one) device use my Apple ID and iCloud account?

How do I make one (and only one) device use my Apple ID and iCloud account? I currently have an iPad mini, iPhone 5, and MacBook pro attached to my apple accounts, but I want only my iPhone 5 to be assosiated with either one. Whenever I use any of the three devices, I get a notification on the other two telling me that these devices are now using these accounts from these services, etc. and I want these notifications to stop, along with the devices using to them. How do I do this? I completely reset the iPad mini so I don't know how I'm still getting notifications from it, and I deleted and signed of of all of my accounts everywhere I could find on my Mac. So, to restate exactly what I want to do, I want ONLY my iPhone 5 to use ANY of my Apple/iCloud accounts and ONLY it can receive emails, iMessages, and FaceTime calls. Thanks!

If you want to disconect your Mac from iCloud, go to System Preferences>iCloud and click Sign Out. If you only want to stop using iCloud email, just uncheck Mail. To stop iMessage, open the Messages app, go to Messages>Preferences, click the Accounts tab, click your iCoud ID on the left-hand side, then to the right click Sign Out. To stop FaceTime, open the FaceTime app, then click "Apple ID" then click Sign Out.
On your iPad, go to Settings>iCloud and tap Delete Account (or if you only want to stop using iCloud email, turn Mail off). For FaceTime, go to Settings>FaceTime, tap the ID and sign out. For iMessage, go to Settings>Messages>Send & Receive, tap the ID and sign out.

HT4009 Apple charged me £20.99 for in-app purchase for an app I just bought an hour ago while I did not bought any in-app purchase. How could I make claim and refund this money?

Apple charged me £20.99 for in-app purchase for an app I just bought an hour ago while I did not bought any in-app purchase. How could I make claim and refund this money?

If you didn't make an in-app purchase within the app then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
You may also want to turn off in-app purchases via Settings > General > Restrictions > In-App Purchases 'off'

How do we make automatic and mass transports via Solution Manager

How do we make automatic and mass transports via Solution Manager ..
how can we do this is there any specific procedure please let me know
Regards
Karthik

To attempt a new chat session...
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
http://helpx.adobe.com/x-productkb/global/service1.html

I've never made a rescue email, how do I make one and change my security questions

I've never made a rescue email, how do I make one and change my security questions

Click here for information. If you can't reset them through the method described in that article, contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(95613)

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe …

How do I make front and rear outputs on my Audigy sound the same. Rear is dull and quie

Similar Messages

Maybe you are looking for