How do I make good scrolling text for end credit
Hi,
I'm trying to make end credit as in other feature films. I tried to use Boris title 3D, but the space is not even, how can you make it even between character's name and their real name side by side?
Do I have to set the margin?, if so what is the correct measurement for it.
Thank you for your help
No worries,
Open Boris 3D. Here's a step by step:
Right (option) click the button with and A on it at the bottom right of the Viewer.
From the shortcut list select Boris>Title 3D.
Go to the Viewer and select the Controls Tab.
Click the grey box that says *Tile 3D*.
The Boris text window should open and you're ready to lock and load the titles.
The default Justification is Centered. You can tell by looking at two things.
1. Six justification buttons about centre left of the window.
2. The small icon (foot) at the top left corner of the Boris Window.
Click the justification buttons and watch the little foot icon change. Got it?
With the Foot icon justified to the LEFT, drag the icon along the Ruler to the place where you want to start the left side of the text.
Change the icon to Right justified and repeat the last step.
You should see two icons with the feet facing away from each other.
Hit the Tab key (on the keyboard), the cursor will move to the first Tab (set in the Ruler), type away in left justified mode.
Hit the Tab key again (on the keyboard) to move to the other icon (set in the Ruler) and type in Right justified mode.
Repeat for as many lines as is required.
Al
Similar Messages
-
How can I make a scrolling text in keynote for iPad?
I have a long text box I have typed on keynote for iPad 2 on iOS 5.1.1 and I am trying to get it to scroll so I can fit it on one slide... How? I have tried using moving in and moving out but it moves too fast for anyone to read.
Yes You can if you are updated with IOS5.
Here is the method...
1-Tap on "Photos" on home screen
2-Tap on camera roll (may be you are already in camera roll)
3-Look at top right, you will found one arrow point out of the rectangle, tap on that
4-It will show "Select Items" now select as many pictures you want to select...
5-Look at the top right corner, you will see "Add to" tap on that
6-Add new album
7-Enter the title for new Album
8-tap on save
9-you are done... -
How do i make a scrolling text box?
hi, i'm looking to make a text box that the user can control the scrolling, i've made it how i want it to look already, but i haven't got a clue where to start as to how to make it actually work.
here's how i've got it set up so far, okay this is gonna take some explaining:
i've got the document made up in AS2, the movieclip known as 'Philosophy_tween' is on the main timeline, and inside that movieclip are two more child movieclips, one for the text and another for the scrollbar.
the text movieclip is set to scroll upwards, behind a masking layer using a motion tween on the parent movieclip, whereas the scrollbar movieclip motion tweens (inside itself) the scroller button. look at the attached image.
both motion tweens have a stop(); script at the beggining.
i don't know what to do after this though, so please help, thanks in advance!i've got the nextFrame and prevFrame scripts working now, i'd only missed the brackets from those functions. i've also gotten the slider to respond to the button clicks of the up and down arrow by setting up a motion tween for the slider, so it actually works, just along with nextFrame and prevFrame functions. i've also put the slider button at the same level as the text movieclip
but what i do still need is to be able to control the slider button directly, so the user can drag it up and down and the text responds accordingly, like you said using the enterFrame function, but i don't really understand event listeners and that sort of thing, yet. -
How can I make a title (text) on a postcard vertical not horizontal text?
How can I make a title (text) on a postcard layout vertical not horizontal text?
Insert it in a Text Box then rotate this one.
Yvan KOENIG (VALLAURIS, France) lundi 13 juin 2011 16:20:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
How do I make a 3D text spiral?
Hello everyone,
I am making a poster for a school project and I want to make a Spiral Text but in 3d format. Illustrate only has a 2d Spiral. Below is an example that I am trying to replicate.
So basically my main question is how can I make a 3d text spiral?
Additionally, not required to answer, but how would I make the spiral fade and break like shown in the corner of the image?
Thank you very much!Your example consists of several text on paths.
See manual for the details -
How do i make non-safari text larger
How does one make (non-safari) text larger?
Try: General > Settings > Assessibility > Larger Text
Is that what you are looking for? -
how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen
You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red. -
How can I make a bootable disk for Mountain Lion?
How can I make a bootable disk for Mountain Lion?
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion. -
How can I make a "property node" for a VI?
Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/AmirYou really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world! -
How do I make a recovery disk for my Mac running 10.5.8?
How do I make a recovery disk for my Mac running 10.5.8?
Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4 -
How user can get a Sales Text for the any Line Item in the Billing?
Salute Masters ! !
How user can get a Sales Text for the any Line Item in the Billing?
It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
Where I can configure in system for all.
Rgds
Srivastav
09973504950Hi,
Sales text can be copied from customer to order , order to delivery and delivery to billing .
Check the T-code : VOTXN , do the customization as per your requirement.
check the below link :
http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm -
How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!
Get a template from Avery. These work well in WORD.
Enhance the graphic in PSE, then import it into WORD.
Free Avery® Template for Microsoft Word, DVD Case Insert 8891 -
How do I make a photo folder for different event on ipad2?
How do I make a photo folder for different event on ipad2?
These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
Cheers, Tom -
How do I make a plot file for AutoCad to produce a PDF
How do i make a plot file for AutoCad to produce a PDF
Moving this discussion to the Creating, Editing, & Exporting PDFs forum.
-
How can i add Document Header Text for s_alr_87012357
Hi Gurus
How can i add Document Header Text for s_alr_87012357(Advance Return for Tax on Sales/Purchases).do i need change the standard program or is there any alternate to do this please help me out.i found it .its in output list and i did change the layout settings.thanks
Maybe you are looking for
-
10.2.0.3 on RHEL 5.x (upgrading OS)
Hi Friends, We have a database running on 10.2.0.3 version on RHEL 4. Now we got a request for upgrading only OS from RHEL 4 to RHEL 5.x. I would like to know if this is possible? means can we have 10.2.0.3 running on RHEL 5.x? Also, if compatible, w
-
WebI error when running against SAP BW
Hi all, I run a WebI query against BW 7 (XI3.0) and it display the following errors: MDDataSetBW.GetCellData No more storage space available for extending an internal table. (WIS 10901) To me it seems like a database resources issue. So how can w
-
MDX Calculated Member With Multiple Conditions
I need to create a calculated member in my cube that spans multiple dimensions. A current calculated member looks like this: [Employee Hours Category].[Utilization Category].[NON-PTO], [Measures].[Employee Hours] This calculated member returns all th
-
Web Dispatcher configuration (ABAP+Java vs. ABAP+Portal)
We are using an internal Web Dispatcher to allow the connections from different networks. This Webdispatcher entry we add to WAS configuration within Portal system object By defintion of ABAP+Java double stack we do not have any problems and the test
-
I have never set the answers to my security questions...though i cannot buy anything till i provide answers...how do i create answers?