How do I make iPad add a printer using airport extreme?

Please check this Apple Support article: Apple Support - AirPrint Setup and Troubleshooting

Similar Messages

How do I install an HP C4100 printer to airport extreme?

I can connect my C4100 via USB directly to my laptop, but I don't know how to install it to airport extreme. When I attempt to print using airport extreme, I get a connection failure. Can you provide instructions? (I am a new MAC user).
Thanks.

Hi there,
this morning I resolved the printing issue with my HP psc 1217 All in one.
I was almost ready to go into the next computer store to buy a airport compliant device when I found this link for more than 600 printer drivers:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
My psc 1217 is not directly listed, but works well with the drivert for the 1210 device.
the photosmart C4100 is also listed so it should work as well.
What you have to do is:
go to the page: http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs#Printers
1. download the package: Foomatic-RIP (88k) and install
2. download the package: espgs-7.07.1.ppc.dmg (5.4MB) and install
3. download the package: hpijs-2.7.6.U.dmg and install
go to the printer manager and select the driver from the list you will see a bunch of newly installed printers.- Works well for me and allows me to keep my loved psc1217.
Cheers,
Torsten

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

How to add USB printer to airport extreme

How to setup with utility

You do not use the AirPort Utility to set up a printer if that is what you mean.
You will need a Mac or a PC to setup the printer.
Post back to let us know what you have and what operating system is being used. Also we need to know if your are asking if it is possible to print from your iPad or iPhone. It may or may not be.
Keep in mind that not all printers are compatible with the AirPort Express, so this will be one of those times when you will not know if something will work until you try it.
Also keep in mind that if you have an All-in-One device, only the print function will be supported when the device is connected to the AirPort Extreme. If you need copy, scan, maintenance, etc.....probably best to leave the device connected directly to your computer.

How do I make a wired connection to my Airport Extreme that will share the same network as any wireless connection to it?

Here's the set up.
I have a cable router into the house and then an Airport Extreme connected to it. Everything connects wirelessly to the Airport Extreme apart from one computer in the same room as it, which I wired into the AE with a cable (it's a gaming PC and has no wireless).
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.

There is nothing stopping you connecting to the wireless computers if you have sharing turned on..
How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.
I don't quite follow this..
If the cable modem is a router.. the AE must be in bridge mode..
So all routing is handled by the cable modem router.. and the wireless clients will all be in the same IP range as the PC is.. please check that by opening the PC command window and type ipconfig /all
Then go to one of the wireless devices and check that it also has the same IP range.. eg,, 192.168.x.x and same router or gateway address eg 192.168.1.1 and same DNS.. which is the same as the router address..
Then in the command window of the PC use the command ping to see if the other devices respond.. ping it by name or by IPaddress.
If there is no response.. windows has decided it is in a public network.. and slammed up the firewalls.. make sure your network is set as home for location.. and make sure the firewalls .. you can have multiple if you have an internet security package are not blocking local network access.
Also remember PC and Mac in a network can take a bit of fiddling to see each other. But ping should always respond and in both directions.

Error 9672 when trying to print using airport extreme

I have just purchased a new imac running os x 10.5.1 and an airport extreme base station. I have a canon pixma mp530 printer and have on occasions successfully printed using the printer with the airport extreme but it has been inconsistent and I have never been able to locate the printer drivers in the utilities folder. So I thought I would download the latest drivers located in the canon website claiming that they were os x 10.5.1 compatible. Now I am unable to add the printer to my printer list in the finder as I get a 9672 error message and my screen freezes and I still have no printer in the utility folder. I have a ibook running tiger and the printer when connected to both the ibook and the imac using a firewire works perfectly. Has anyone else had these problems using a printer wirelessly or is there something I am missing. The internet works with base station with no problems.

Despite being a total newbie, I good the damned thing to work--At least for now.
I first unplugged the airport and then the printer. Plugged them both back in and then went to Canon's site to redownload the drivers. Restarted the Macbook pro and to my astonishment it worked. Again, at least for now.....

HP Photosmart C4600 wont print using Airport Extreme

I recently purchased my MacBook Pro and accessories and my HP printer wont print. It would add to my printers under Airport Express yet wouldnt print anything out.( Always said 'locating printer') I've read other suggestions and none seemed to help or supported my printer. HELP ME!! : )

Is the AirPort Extreme model a newer rectangular model, or an older
orb-shaped 54M model with built-in modem, antenna jack & USB port?
Some printers don't appreciate the courtesy extended them by the
great AirPort Extreme's ability to connect various brands via USB
which otherwise would not be supported wirelessly.
I have an HP (all-in-one) that will not work as a USB wireless printer
via the AirPort Extreme (or AirPort Express) base station's USB. Yet
a slightly older Epson Photo printer will print satisfactorily through the
USB port in AirPort wireless base station models. The only failing, in
that situation, is lack of printer Utility function; it works only by wire.
Some printers are not supported in the grand scheme of things, in
regard to USB printing from the AirPort's USB port. However for
years prior to Time Machine and other official hardware support for
wireless connections to external hard disk drives, USB 2.0 HDDs
(storage) were supported by the orb-shaped AirPort Extreme base.
However, that's another topic...
I was unable to find a different driver from HP to aid in USB support
over wireless, per the AirPort base station. Other drivers, such as
those from http://gimp-print.sourceforge.net/MacOSX.php didn't,
when it came to my HP OfficeJet printer. Not sure about later ones.
The Epson model I have uses Bonjour printing to be seen by the AEBS.
Good luck & happy computing!

Printing using Airport Extreme

Can I print from my iPad using a printer that's attached to an Airport Extreme?

Very likely yes, if you use an application like Printopia. Try the free trial. You will know in about 30 seconds whether it work.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

How do I get a VPN acct accessed using Airport Extreme Base station?

I have PC running Windows 2000. For my job, I access a hospital VPN at home. In my home, I am able to set up the Extreme Base Station for wireless conductivity with computers in my home and all have access internet wirelessly. No problem.
The problem is that I cant get it all to work together. How do I configure the base station to recognize/allow the VPN client to enter my network?
I currently have WEP 128 on. The computer used for VPN is hardwired to the base station. Even with security turn-off, I cant access the VPN via base station set up as it is.
help!
PC Windows 2000

I recently got my roommate's Lenovo t43p with VPN to finally work with my Airport Extreme.
1. Open the Airport Utility
2. Double click on your Airport Express on the left side to open up the panel.
3. Click on the "Internet" tab and then select the "DHCP" tab.
4. Click the "+" sign under "DHCP Reservations"
5. Create a name for the profile like "XP Work Laptop" or whatever, and then click Continue
6. You'll need to get your Windows laptop's MAC address which is sometimes under your laptop on a sticker, or you'll have to dig through XP's ridiculous Control Panel to find it.
7. Enter your laptop's MAC address in the field.
8. Lastly, in the 'IPv4 Address" field designate an IP address for your XP laptop that is within your router's range, if you're not sure of the range, the "IPv4 Address" range should be auto-populated with an IP address and you can just try it with that, or if it doesn't work you can change the last number to something higher but no more than like 4-5 digits more.
Hope this helps, Good luck!!

Can't print wirelessly with HP 7410 printer using Airport Extreme

I've got 3 Macs (2 laptops, one desktop) that I was using successfully with my wireless HP 7410 all in one printer using my old Airport Base (snow) Station (822 b & g). Just upgraded for a variety of reasons to the new Airport Extreme Base station and I have NOT been able to get the printer to print wirelessly.
I have tried all available normal methods, including, but not limited to:
1) resetting and restarting the printer and computer
2) installing new printer software, including driver
3) deleting and reinstalling printers using the "print and fax" system preference
4) using the printer on a non-secure network
5) setting up the printer to connect via IPP and LPP
The end result of all of this is that the printer is attached to the network, but the computer (any of the 3) cannot connect to the printer. When I run the HP setup assistant, it cannot "find" the printer.
Everything was working perfectly before I "upgraded." Why am I not able to print with the new base station?
Your help would be greatly appreciated.

I have the same proble trying to print. I have a Mac and 2 PC laptops. I tried to print to three different printers and it will not work. I called Apple support and I was told that it was set up and configured correctly, that it ust be my firewall blocking the printer. I'm at a loss after $179.00 and three hours of trying to get it to work.

Printing with a USB printer using Airport Extreme and Vista

I have a airport extreme and it prints fine with all of my Macs.
I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
* Installed Bonjour Printing software on the Windows Machine
* Installed the print drivers on the Windows Machine
* Bonjour finds the printer and driver without any problem
* When I test the printer will print either one page or half of one page and then I get an error message.
* I enabled the UDP 5353 port in the Firewall
The printer is a Epson Photo R220
I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
If anyone out there has a solution I would very appreciative.
Thanks

No help from the forum. I used Bonjour for Windows.

I cannot print from windows xp to a usb printer using airport extreme v5

I just bought the new airport Extreme, loaded Bonjour on a lenovo t400 running win xp sp3.
I can print with the printer plugged in to the computer but cannot print using the bonjour setup. I can print from my Imac connected to the airport extreme (hard wired) and wirelessly from my macbook.
I have no issues connecting to the web through the Airport Extreme with the PC.
I have all the proper drivers installed.
the Printer in question is a lexmark P910 Series and the drivers loaded with bonjour.
Any thoughts on why I cannot print using the PC?
Thanks

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Can't print using Airport Extreme with a DELL P1500 printer

I connected my Dell P1500 printer to the USB port of the Airport Extreme. I can see the printer under USB printers in Airport Utility, but cannot print.
Note: I can print when I am connected directly to my MacBook Pro.
Please help.

You will need to use the AirPort Utility to both verify that the AEBSn "recognizes" the USB drive and to enable File Sharing. Once those two steps have been completed, you can then try to access it from your Vista PC.
Note: The AEBSn will not "recognize" a drive formatted in NTFS connected to its USB port. It would have to be formatted in either FAT32 or HFS+.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

How do I make iPad add a printer using airport extreme?

Similar Messages

Maybe you are looking for