How do I make iPad images high quality in Photoshop?

I'm a graphic designer and I tried setting the resolution higher with my 1024 x 768 image but it still looks crappy when viewd on my iPad 2. How do I make the image higher quality when I save it? I use Adobe Photoshop cs4.
Thanks

Photos that are synced via iTunes get 'optimised' during the transfer, though I don't know what the optimisation actually does (and it's not possible, as far as I know, to bypass the optimisation when syncing photos). If you want your versions of the photos on the iPad then you could try the camera connection kit, emailing them to yourself (and then saving to Photos), or one of the wifi photos transfer apps - though the photos will only go into the camera roll/saved photos album (at least until iOS 5 which should allow us to move photos between albums)

Similar Messages

How do I make the video higher quality?

How do I make dvd's with a higher quality? I have a Sony AVCHD Camcorder. I used to use a Macbook Pro and iMovie and iDVD to make DVDs and I could choose to make them a higher quality. The problem was that it would literally take DAYS to get them done. I switched to Final Cut, which is quicker, but I can't seem to make the DVDs a higher quality and they are very fuzzy compared to what I used to make.
My husband assures me that the pros in Hollywood use Final Cut Pro to edit video, so it must be possible to make these a better quality.

If you still have a copy of iDVD:
Export from FCP X As a Master File and use the export in iDVD the same way as you did with iMovie.
Bear in mind all DVD discs will only ever be SD Quality and not HD.
Better quality requires a jump to Bluray.
FCP X can burn direct to Bluray if you have the gear.
Al

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe …

How can I make a image like this one? (image in description)

Hi guys I need to know how can I make a image like this one http://img31.imageshack.us/img31/2710/69823211.gif
I need step by step instructions please. How can I animate it like that? Whats the font? Tell me everything please.

To do a step by step instruction on here will take someone a very long time, as you havent really said at what level you are at.
On Youtube there are a lot of animation tutorials for PS. But essentially in this case you are moving that white streak across a few frames at a time.
The font might be found with the help of http://http://www.myfonts.com/WhatTheFont/

How can you make an image change every time you refresh a page?

Hi.
I've recently redone my website and was wondering how I could make the image on my main page change every time you refresh the page?
Like is there a certain script you can use?
Here's my website
www.liamfawcett.com
Thanks

Copy & Paste the following JavaScript code between the <head> and </head> tags in your HTML document, in Code View of course.
<script type="text/javascript">

</script>
In the array, change URLs (http://www.example.com) to your own links. Change images (some_image.gif) to your own images.
Save page. Preview in browser. Hit refresh (F5 or Ctrl+R) to see the images change.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

How do you make an image or text, appear on every slide?

How do you make an image appear on every slide?

What part did you not understand?
As Andrew said, open the Keynote file, go to the View Menu>Show Master Slides
This is what you should see on the left hand slide of the window. The Master slides are at the top and the check mark goes by the Master Slide that is referenced on which ever slide you have selected in the Slides pane.
Add to the Master slide the image or text that you would like to see on the slides that are made off of that master. You can see in the Title & Bullets master slide, I added the shape in the lower left hand corner and it was added to all the slides build off that master.
If this still isn't clear, let us know where you are getting stuck and we will try to help.

How can I make an image appear partially in front and partially behind another layer in Adobe Illustrator?

How can I make an image appear partially in front and partially behind another layer in Adobe Illustrator?

Put the image behind the layer (at the back of it or on a layer below). With it still selected, Copy.
Now Paste in Front (Ctrl+F). Depending on your Paste Remembers Layers setting, you may have to bring the newly pasted copy to the front, or to the upper layer.
Draw a shape over the image to define the portion of it you want to appear "in front."
With the shape and the image selected, clip the image using the shape. (Object > Clipping Mask > Make)

How can I make an image placed in the body tag expand to the entire width of the browser?

How can I make an image placed in the body tag expand to the entire width of the browser?I

background-repeat -- best used with small image tiles.
background-gradient - Ultimate CSS Gradient Generator - ColorZilla.com
background-size:cover - Resizable Full Page Background Image
Nancy O.

Will ipad allow higher quality video streaming over 4G?

Will there be improved video quality on youtube and other video streaming on 4G compared to existing 3G connctions? The ipad appears to dumb down video streaming in 3G compared to streaming the same thing on wifi. It is often highly pixelated and blocky, Will the new ipad allow higher quality video streaming over 4G, i.e. the same quality as wi-fi?

The YouTube app is made by Google. Any suggestions you have about that app should be directed to them.

How do I make iPad add a printer using airport extreme?

How do I make iPad add a printer using airport extreme?

Please check this Apple Support article: Apple Support - AirPrint Setup and Troubleshooting

How do I Make cr2 files to jpeg in photoshop elements 10? [was:files]

How do I Make cr2 files to jpeg in photoshop elements 10? And why are my raw photos looking really pixilated?

mgills2013 wrote:
What is the difference between mRaw and sRaw?
http://cpn.canon-europe.com/content/education/infobank/image_compression/file_types_raw_sr aw_and_jpeg.do

I am using Photoshop CC, how do I scan an image (hand drawn) into photoshop?

I am using Photoshop CC, how do I scan an image (hand drawn) into photoshop?

Hello,
please have a look at "Photoshop Help/Acquiring images from cameras and scanners" >>>
http://helpx.adobe.com/photoshop/using/acquiring-images-cameras-scanners.html#WSfd1234e1c4 b69f30ea53e41001031ab64-790ca
>>> Importing scanned Images and so too here for some critical responses/voices in
https://forums.adobe.com/thread/1245120
https://forums.adobe.com/message/6152457
Hans-Günter

Creating Still Images/High quality JPG's...please help

We are in desparate need of creating quality still images from captured video. Basically, we have footage in mini DV format that we import into Final Cut HD using a Sony Clamshell deck. What is the best way to make high quality still images?
We tried it this way....Export Quicktime as Still image...and it just looks bad, Even after De-interlacing it within Photoshop. We need it to look exactly like it does if we simply press pause on the deck or pause within Final Cut.

When you start with DV material, the highest res you can for a still image capture is 720x480 (non-square) or the equivalent of a really bad quality cheepo still camera. (~640x480 square pixels)
To avoid the need to deinterlace, (the horrors of which are described below) find sections in your masterpiece that have VERY LITTLE motion, i.e. everyone/thing standing/existing absolutely still with the camera locked down on a tripod. These sections will yield the very best possible still images.
If you have motion the frame, the still images will exhibit 'tearing' which comes from the two fields of video being recorded ~1/60 second apart. The second field shows elements displaced from the first field - hence a kind of internal image shifting going on. The only real way to deal with these kind of images is to deinterlace them - that is - decide which field you are going to keep and throw away the other.
When you have deinterlaced the image, you have in effect reduced it from a 720x480 image to a 720x240 image. The image pixel count REMAINS 720x480 but with half the vertical information as the remaining lines are doubled or interpolated to build back to 480 lines.
Confused yet? I hope not...
Still, if you know you'll want stills from a project, it's better to carry around a small digital still camera, you'll get better results. Otherwise, plan on pretty small prints.
Good luck.
x
Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered when you get enough information to close the thread.

How Do You Make an Image Flow with the Text?

Hello all,
I am using CS4 InDesign on Windows Vista. I am fairly new to Indesign but try to do my research and homework well before asking what I hope is not a really dumb question.
I am writing a book of approx. 350 pages that is an illustrated encyclopedia of 156 plants and their oils.
Each 2 page spread is a single entry for a plant. The graphics frames on each spread are identical in size, position and styles for a consistent look throughout the document.As you can see (hopefully) each page is a single column. See screenshot below
In order to overcome my first problem of positioning and sizing the graphics frames uniformly, I created the master pages with the graphics placeholders sized, positioned and formatted to my liking. This worked wonderfully and I placed all of my 300+ graphics by simply over riding each frame.
Then in my editing I decided to add another 2 page spread somewhere in the middle of this fairly large document.
What a NIGHTMARE. The text predictably shifted but now ALL of my graphics were no longer associated with the corresponding text! Arrrgghhh.I had not anticipated this behavior (used MS Word for 15 years) or I would have done something different.
3 hours later I finished re -"placing" the images associated with the correct text.
I researched the help file and found out about the neccessity of anchoring graphics to text. I have read through the threads in this forum, followed links to "indesignsecrets.com/make-an-image-flow-with-the-text" and " Working with anchored objects by Anne Marie Concepcion"
My concerns are this.
An inline graphic places the graphic back onto your text layer for some reason ( Previously my graphics each had their own layer)
Not wanting to start (again) from scratch with my graphics I converted them to inline/custom anchored objects.
But to select then cut then paste every pre existing graphic to anchor it inline seems to be cumbersome and counter intuitive although the top smaller graphic did position well and the text seemed to wrap ok.
When I placed the larger bottom graphic on the left facing page using custom positioning I was not able to get the text to wrap at all.( The in line anchoring did not seem to allow for positioning on anything but the 'Y' axis).
It seems that there would be a simpler way to place text and graphics where you want them and have them associate and flow together (or not) when you want them to and have text wrap easily around an anchored object without keyboard gymnastics. It would seem that the concept of a certain graphic being associated or linked with certain text would not be an unusual concept in desktop publishing.
Am I missing something?
Can you place an anchored graphics frame on the master page with your desired options?
How would this be done if possible?
Is there any other way (i.e grouping) to keep graphics associated with the desired text so that it flows together if extra pages are added?
Is the fact that my graphics frames are on my master pages responsible for my text wrap difficulty? (I have text wrap enabled on my master pages)
Are there any settings, redundant or otherwise, I need to be aware of?
Thank you in advance for any suggestions or directions
L.N.

Hello Again,
Thank You Bob but I am still a little fuzzy on this. I have already created object styles for the graphics frames. For instance the small graphic underneath the heading (Its a drop of oil) has an object style applied. Now I checked and it has the anchored object options checked in the style dialog box. When I reapply the style to the next similar graphics nothing happens. It is still not anchored. Do I need to create a new style based on "nothing" add my effects plus the anchoring options? Basically start over. If thats what I need to do thats OK. As to your instruction that object styles could accomodate this anchoring thing...thats what I thought too but somehow I can't get it to work. See object style dialog box screenshot below:
For the larger graphic on the bottom of the left facing page. I still cannot get any text to wrap. In the screenshot example the text describing this particular plant doesn't go to the bottom of the page so the wrapping issue on this page is moot. However I have some entries where the body of the description is more involved and does go to the bottom of the page and the text WOULD need to wrap around the plant (larger ) graphic.
Hi there Harb, Yes I found out early on that object styles can't apply size (that would be on my wish list for sure) That is why I found that creating my graphics frames on the master page with the correct size, effects and positioning tickled me so much. Can you believe I originally went through and MANUALLY resized and repositioned each and every 300+ graphics in this book but it still wasn't right. I'm nothing if not persistent. (Now if I could just get my grown sons to pick up their socks!)
Anyway the master page graphics frames idea would be perfect if I could get the images to anchor in their respective spots on the master page as well.
For your second suggestion. I am not clear about why I would need to break the threads of each spread so that each spread is a seperate article. Is the threading issue the thing that is causing my text to move on leaving their associated graphics behind? If so how do I go about doing this?
So to recap:
1. I need to know if I can modify my object style or recreate from scratch with the anchoring option (as I said it didn't work)
2. Can't get text to wrap around the Custom anchored graphic at bottom of page at all
3. Im not clear on the breaking the threading on the spreads
I am willing to go back through and start from scratch (new master pages, styles etc ) if neccesary. This book is the culmination of 7 years of research and artwork.Basically the project is DONE. Now if I can just format it correctly.
I can't thank you both enough for your time, suggestions, expertise and patience.
Thanks again
LN

How can I make the image number biger in a PDF presentation?

How can I make the original image number, biger, located on the lower part of the picture in a PDF presentation so people don't have to zoom in 50% or 100% in order to see number of each picture in a automate PDF presentation. Thank you for your help

When a document is signed, the signer has the option of locking the document. The links won't be active if the document is locked, so to avoid this, instruct the signer not to lock when signing.

How do I make iPad images high quality in Photoshop?

Similar Messages

Maybe you are looking for