How do I make multiple edits in Audition 3?

Hi! Is there a way to highlight multiple portions of a waveform within the same file to then apply an edit? For instance, if I wish to reduce the volume of breath intakes on a vocal by 10 db in six spots in the file. Can I do this all at once by highlighting all six breaths, then do the edit? Many thanks!

Already answered in your other thread.

Similar Messages

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

I've created a Word document from a pdf file. How do i make it editable?

I've created a Word document from a pdf file. How do i make it editable?

Hi Kaz1,
The Word document should be editable after the conversion is complete. What happens when you try to edit it?
Thanks,
David

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

How do I make multiple screens transition?

I have figured out how to make multiple camera angles play onscreen at one time, but I would like the layout to change while the video plays, how do I do this (or at least get started)? I realize that this is probably basic, but I am making the move from basic editing in iMovie and it is proving painful.

OK, so I am making a demo video for my live music show.
I have three angles, one front, one of the guitar, and one of my feet.I have all three playing onscreen simultaneously in three screen panels on the main video screen.
If I export it right now you see all three angles playing at once
The layout is such that one angle is larger than the other two.
I would like, at certain points in the video, to have the emphasis change, and have the video transition to one of the other panels getting larger, and the big one getting smaller.
Does that help?
Brady

How do I make multiple buttons in my flash animation?

I am new to flash, and I have no training in it whatsoever. I
created a flash animation with flash CS3 for my photography
website, and I want to link each of the images to different
galleries on my site. When I created my first button it worked
fine, but when I try to create actions to link more than one image
as a button, keep getting an error that says "1021: Duplicate
function definition." How do I make each image as a separate
button?
I used the video of this tutorial as my guide to learn how to
create a button:
http://www.adobe.com/designcenter/flash/articles/flacs3it_firstflash_pt1.html
Also, when I run the animation to test it, it loops, and I
don't want it to loop. How do I stop it from looping?

I used the method shown in the tutorial I mentioned to create
it (created a new layer for the button, selected the area of the
image for the button,used modify -> convert to symbol
-> button, I edited it so it was an invisible button by
moving it to the hit frame, gave the selected area an instance name
of Hizumi_btn, inserted a new layer for actions and added the code
I have attached to this post.
I assumed that I would just need to repeat this procedure for
each of the other images in my animation, but when I did that I
received the error.
I greatly appreciate any help you can give me.
Thanks for the information on how to stop the animation.
Here is the code I used to create my first button.

How do I make "destructive edits" in Lightroom like I do in ACR?

Hey Guys,
I recently made the switch from editing in Adobe Camera Raw to Lightroom and am disliking some of the workflow. I really enjoyed how in ACR the edits to my photos would save as soon as I hit done. There are many times were I need to close out of my of editing software quickly and don't have time to export everything out of light room. So as the question states, how do I make Lightroom save the changes I make to photos instantaneously without having to export them?
Thank in advance,
Matt

I assume you are using XMP files with Camera Raw. You can do that with Lightroom if you choose the option to write changes to XMP sidecar files in your Lightroom preferences. But if you use a Lightroom with its default setup the adjustments you make are stored immediately in the catalog. You can stop and close Lightroom at any point, and when you return Lightroom will retrieve from the catalog all the adjustments you have made to whatever image you have highlighted in the develop module, or in the library module as far as that goes. I have chosen not to use XMP sidecar files, and rely on my catalog to store all of my Lightroom adjustments. Again, making an adjustment in Lightroom creates a history step in the catalog immediately. There's no need to export in order to keep all of your adjustments.
Incidentally, regardless of how you set up your workflow, you cannot make "destructive" edits using Lightroom. Your master images always remain unmodified as far as the file contents are concerned.

How do I make video editing less laggy in PS cs6?

I'm using Photoshop CS6 to edit some video clips together, but it's super laggy. How do I make it so it's less laggy? Will putting my video files on an external harddrive work?
I'm using a MacBook Pro which is fast, but the video editor eats up my computer's speed like tiger.

Welcome to the forum.
First, what are the full specs. of those Video files? On a Mac, you can use the utility, Media Inspector, to get the full details.
What are the specs. of your MBP, and especially the CPU speed, and number of cores? The reason for this info, is that if you have any form of the H.264 CODEC in those Video files, you will need a very fast CPU to smoothly handle them.
As for the external HDD, that will depend entirely on the connection type/speed, and then the speed of the HDD itself - you want at least 7200RPM. For connection type, you want an absolute minimum of FireWire 800 (IEEE-1394b), and USB 3.0 (not USB 2.0), or eSATA will be even better. If you do not have H.264 material, then the I/O (Input/Output) will be the biggest bottleneck - with H.264, then the CPU is the biggest bottleneck.
Let us know a bit more please, and good luck,
Hunt

How do I make multiple start up disks

I've partitioned my Imac(intel) for lion and leopard but can only start up in leopard. how do I make both partitions start up disks?

babowa wrote:
Frankly, I'm stumped because I didn't know that Time Machine backups are bootable?
The backups aren't, but when you restore them, the result is bootable.
And, effective with 10.7.2, if you back up to a directly-connected external HD, Time Machine copies the Recovery HD to the Time Machine drive, so you can start up from it if your internal dies.
Take a look at this site (in particular scroll down to Time Machine):
Just for future reference, since Apple's dropping web hosting via MobileMe, I've moved my site.
The new version is at http://pondini.org
I'll leave the old one "as is" for a few days, then put redirect notices on it until it goes "poof" in June.

How do you make multiple folders in the photo app-

the question speaks for itself.also, how do you sync multiple albums onto the phone?

The way I sync folders is this (I know it may not be what you are looking for).
But in iTunes you can pick a folder to sync to. For me I made a specific folder just for my iPhone.
Any pictures I want on my iPhone I put in that folder (copies).
And then in that folder you can create subfolders (to organize). Note though you can only go 1 subfolder deep. You cannot put a subfolder in a subfolder.
So for example:
C:\DATA\iPHONE This is the folder for my syncing.
I can create
C:\DATA\iPHONE\FAMILY
C:\DATA\iPHONE\FRIENDS
C:\DATA\iPHONE\ABSTRACT
C:\DATA\iPHONE\NEWYEARSPARTY
But I cannot create
C:\DATA\iPHONE\FAMILY\WIFE
Then you just put pictures you want sycned into them. Sort of better to work with copies and have a folder specific for the iPhone I think. At some point you will want pics removed from your phone and far easier to just delete them from the iPhone specific folder than if you went to route of syncing to the folder you actually store photos you want to keep forever on your computer. Having a specific folder with copies means you can delete and add at will and know your real memories are elsewhere.

How can we add multiple editable region in template

Hi,
My issue is when I am going to create a new template I want to add multiple editable region in template and I want to use those editable region per page wise so that in page editor I will add different text for each page for those editable region.
I can use incontxt editor to change those area for different pages although is it possible to use online editor to add different text for different pages.
I also have a plan to solve the issue ... that is also not working.
Plan is .. if we can use tag (not the default one in template), want to use different tag like {tag_headding},{tag_sidebarcontent} in template so that we can use those tag in template and fill the field in the page online editor, so when differnt page we will create we will fill those field for those tag and that will show in the front view of the site.
Please help me. I am really stuck on this issue.
Thanks in advance.
Projjwal

Hi Projjwal,
Yes, if you look at many of the commercial BC templates available the way they are getting around it is with Content Holders and multiple templates.
Now I know you will say that multiple templates is high maintenance ..... not if you use Content holders for both recurring content and unique content.
Think of Conent Holders as 'Includes' ... I have been doing it this way with templates that I build from scratch as well. Easier than you think.
And that way the client can change content such as footer information or whatever that appears on all pages without editing the template itself.
Only drawback is that if you are using Design View in Dreamweaver the content holders don't render. But other than that Content Holders are awesome.
Brad

How do I make multiple plain text links active (clickable) at once?

I'm running Number 3.5.2 and I deal with a lot of documents that have long lists of URLs. Anytime I open a xls or numbers doc that already has the URLs pasted in, they're listed in plain text and not clickable. Is there a way that I can select all of them and make them active links, or at least do it in some reasonably scalable fashion?
I've found how to use the "Add link" or even the "Open URL" options using the right click menu. And I know about changing the character style to "Link" to make it active. But these options are only available if I click and highlight the specific content in a single cell. It doesn't allow me to select multiple cells and make the change.
I've also tried copying the URLs out of Numbers and into another program (text edit, email) but not too long ago it stopped letting me paste back in active links.
Any help would be much appreciated!

Hi jroos,
The HYPERLINK function in another column.
From the Function Browser:
The HYPERLINK function creates a clickable link that opens a webpage or new email message.
HYPERLINK(url, link-text)
url: A standard universal resource locator. url is a string value that must contain a properly formatted universal resource locator string.
link-text: An optional string value that specifies the text that appears as a clickable link in the cell. If link-text is omitted, url is used as link-text.
Formula in C2 (and Fill Down)
=HYPERLINK(B2)
Then select Column C
Copy
Menu > Edit > Paste Formula Results
Delete Column B
Regards,
Ian.

How do you make multiple libraries WITHOUT replicating similar directories?

I have two ipods and one ipad
On each, I have some of the same music, and more importantly, many of the same movies AND podcasts.
I can't figure out how to use multiple libraries that share files (on a SINGLE COMPUTER).
For example, my three libraries ALL seem to want to create a directory for the exact same podcast, which then stores the files three seperate places, killing my hard drive space.
How can I tell each seperate library to only look in one location for the podcast / movie / music files?
Message was edited by: tvmaster

For some reason, I could only add items IF the ipad was hooked up, is that correct?
No.
You don't need anything connected to create playlists.
If you selected the iPad and created playlist directly on the iPad through iTunes, yes you would need it connected to edit those playlists.
But don't do it that way.
Just create them without the device connected.
Also, you don't need playlists for everything. Mainly music.
In iTunes, you can select the device (when connected) and click the Movies, Podcasts and *Music Videos* tabs and select what to sync. You can make different selections for each device.
For music, create a playlist for each device to have differnt music on each device.
Connect the device, click the Music tab, tick *Sync music*, then *Selected playlists* and tick the playlist you want on that specific device.

How can I make multiple backups for other mac computers?

I have multiple mac computers and I need to know how to make separate backup disks for them.

http://pondini.org/TM/33.html
Related thread here from a year ago
Multiple Time Machine Backups On A Single NAS Device

How do I make multiple edits in Audition 3?

Similar Messages

Maybe you are looking for