How do I make multiple screens transition?

I have figured out how to make multiple camera angles play onscreen at one time, but I would like the layout to change while the video plays, how do I do this (or at least get started)? I realize that this is probably basic, but I am making the move from basic editing in iMovie and it is proving painful.

OK, so I am making a demo video for my live music show.
I have three angles, one front, one of the guitar, and one of my feet.I have all three playing onscreen simultaneously in three screen panels on the main video screen.
If I export it right now you see all three angles playing at once
The layout is such that one angle is larger than the other two.
I would like, at certain points in the video, to have the emphasis change, and have the video transition to one of the other panels getting larger, and the big one getting smaller.
Does that help?
Brady

Similar Messages

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

How do you get multiple screens on the iPad with iOS 5.1.1?

How do you get multiple screens on the iPad with iOS 5.1.1? We just upgraded to iOS 5.1.1, and we see no way to be able to open multiple screens at once. Before, there was a small button in the upper portion of any window. That button would take you from a particular window to the place where multiple windows are open at once. Does it do it differently? Is there a special setting button that we have missed? Thanks!
One more thing: We are only talking about Safari.

Guitaristica-
I don't think I've seen a way to have separate Safari screens visible at the same time. The small thumbnails were deleted in one of the iOS updates, and replaced with a multiple "Tab" system.
You can open an additional screen in a new "tab" by pressing and holding on a link until a new menu comes up.
Fred

HT204380 How can I make the screen full screen when I am calling?

How can I make the screen full screen when I am calling on Facetime on a Macbook Pro Laptop?

Ok but if the iPhone 5s and 5 can go full screen the why can't the iPad Air as it too is new the problem shouldn't be hard to solve as I have looked the apple site and it show it just fine in full screen so I'm sure you understand when I say there is most definitely away of doing it so can Apple just sort it out I'm always telling my m8 how good Apple devices are and I've been let down on this so come on fix it PLEASE

How may I make my screen shots default to a .jpg instead of .png

How may I make my screen shots default to a .jpg instead of .png?
Is there a preference somewhere?

One easy way is:
Changing the File Format
In order to change the file format you must firstly open up a Terminal window (Applications/Utilities/Terminal.app), and type the following.
defaults write com.apple.screencapture type TYPE
For the command to work, you need to replace “TYPE” with a valid file format, the available options are:
png (default)
pdf
jpg
jp[2 (jpeg 2000)
gif
tiff
bmp
pict
tga
Once you have selected your format simply issues the command, placing the file format in it’s space. For example for a JPG, I would issue:
defaults write com.apple.screencapture type jpg

How do I make a screen print on "IMAC"

How to make a screen print on the IMAC

OS X Screen Capture Shortcuts
(⌘⬆︎) Command-Shift-3 Capture the screen to a file
(⌘⬆︎⌃) Command-Shift-Control-3 Capture the screen to the Clipboard
(⌘⬆︎) Command-Shift-4 Capture a selection to a file
(⌘⬆︎⌃) Command-Shift-Control-4 Capture a selection to the Clipboard

How do i make my screen saver the same as my desktop on my macbook pro 2012?

how do i make my desktop the same as my screen saver on my MacBook Pro 2012? if i can't, how can i choose certain pictures to have as the desktop, instead of all of my photos?

Hello, Hahmelodie.
Thank you for visiting Apple Support Communities.
You may find this article helpful with the issue you are experiencing.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Cheers,
Jason H.

How do I make a screen shot/image

How do I make a copy of the current screen.

There are two ways of making screenshots in Mac OS X:
Through the Grab app, or;
Through keyboard shortcuts.
I recommend you to use keyboard shortcuts. You have the whole list of keyboard shortcuts to make screenshot in this site > http://support.apple.com/kb/ph11229

How do i make my screen rotate when i turn it

How do i make my ipad screen rotate when i turn it

If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support

How do I make multiple buttons in my flash animation?

I am new to flash, and I have no training in it whatsoever. I
created a flash animation with flash CS3 for my photography
website, and I want to link each of the images to different
galleries on my site. When I created my first button it worked
fine, but when I try to create actions to link more than one image
as a button, keep getting an error that says "1021: Duplicate
function definition." How do I make each image as a separate
button?
I used the video of this tutorial as my guide to learn how to
create a button:
http://www.adobe.com/designcenter/flash/articles/flacs3it_firstflash_pt1.html
Also, when I run the animation to test it, it loops, and I
don't want it to loop. How do I stop it from looping?

I used the method shown in the tutorial I mentioned to create
it (created a new layer for the button, selected the area of the
image for the button,used modify -> convert to symbol
-> button, I edited it so it was an invisible button by
moving it to the hit frame, gave the selected area an instance name
of Hizumi_btn, inserted a new layer for actions and added the code
I have attached to this post.
I assumed that I would just need to repeat this procedure for
each of the other images in my animation, but when I did that I
received the error.
I greatly appreciate any help you can give me.
Thanks for the information on how to stop the animation.
Here is the code I used to create my first button.

How do I make multiple start up disks

I've partitioned my Imac(intel) for lion and leopard but can only start up in leopard. how do I make both partitions start up disks?

babowa wrote:
Frankly, I'm stumped because I didn't know that Time Machine backups are bootable?
The backups aren't, but when you restore them, the result is bootable.
And, effective with 10.7.2, if you back up to a directly-connected external HD, Time Machine copies the Recovery HD to the Time Machine drive, so you can start up from it if your internal dies.
Take a look at this site (in particular scroll down to Time Machine):
Just for future reference, since Apple's dropping web hosting via MobileMe, I've moved my site.
The new version is at http://pondini.org
I'll leave the old one "as is" for a few days, then put redirect notices on it until it goes "poof" in June.

How do i make the screen smaller?

How can I mke the screen display smaller?

Check that you haven't indavertently enabled Zoom: System Preferences>Universal Access (or Accessibility, depending on version of OS X)>Zoom, and check the settings.

How do i make the screen full size so I can preview whole page?, How do i make the screen full size so I can preview whole page?

How do I adjust the screen to show the full page and the whole page?

One way to accomplish this is to use the zoom feature.
Use the Text Size buttons in the Toolbar.
If you click smaller A button, the contents of the window will zoom out and more of the contents
will be visible. But fonts will become smaller.
To revert back, click the larger A button.
Best.

How do I make multiple screens transition?

Similar Messages

Maybe you are looking for