How do I make multiple slideshows on multiple displays?

I've got 2 x 30" displays, and the new Mac Pro on lend to me for a gallery showing. Whats the best way to make 2 different slideshows (HD) to play on each individual monitor at the same time?

I got it! thanks for your suggestion. I found an applescript which plays all movies in a folder one after the other, I modified the script so that it plays 2 movies, one on each screen. And now, all I have to do is make a HD mov file for each slideshow, run the script and bingo!

Similar Messages

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I make multiple text bold, for example scene headings or character names?

How do I make multiple text bold, for example scene headings or character names?

You can do that by editing the template of the document.
Open the document, go to Edit->Template. A dialog will launch which will have element types on the left and it's properties on the right.
Select Scene Heading(or Character name) on the left. On the right, go to 'Text' tab and click on Bold checkbox.
Press OK.
Hope this helps.
Cheers,
Sunny

How do i make a slideshow lightbox with only one main image

Hi all,
i was wondering How do i make a slideshow lightbox with only one main image being seen on the page and once clicked the lightbox will open and have multiple images viewable from prev/next buttons with comments.
Reason being is i want have a portfolio page with my work all viewable from that one page so i will have say 10 lightboxes on the page but all with one master image.
Cheers,
Chris

hello
I have the same problem... Its so basic thing and is it really missed in muse ?

How do I connect multiple displays to a Lenovo 405

how do I connect multiple displays to a Lenovo 405 running windows 7? I tried a video card but the built in amd video port would not function with the video card plugged in.
Moderator Note; subject edit, post moved to here

hi harry13,
Welcome to the Lenovo Forums.
If you're referring to the Lenovo® H405, this unit has an integrated VGA and HDMI out according to this pdf data sheet.
If you'll be using a flat panel monitor (that usualy has a VGA connector and a single link DVI D digital interface), you will need to connect 1 monitor to the VGA out and use an HDMI to single link DVI-D converter on the other monitor. You might need to scan for hardware changes under the device manager to identify the monitor that's connected to the HDMI to DVI-D converter. Note that you need to change the video setup under BIOS to IGD or the onboard graphics.
If you'll be using your discrete video adapter for the multi-monitor setup, you must change the video setup to PEG under the BIOS and the video card must have a vga or hdmi/dvi out.
Also, see these guides as a reference:
How to set up dual monitors in Windows 7
Dual monitor setup: Two monitors are better than one
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do i make a slideshow with iphoto for my mother and view on apple TV?

How do i make a slideshow with iPhoto fo rmy mother and view on my appleTV. I guess i need to know the best/easiest way. Do i create a slideshow in iPhoto and then it will automatically pop up on my apple TV Photos? or is it really not that easy? i don't want to do airplay......i would like to sit and enjoy it with her.
m

icloud sync would only be an option if you login with your appleID
so think flickr is the easy way

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

You can do this with "composition" widgets.

How can I make a slideshow with pictures and burn it to a dvd? what program to use?

how can i make a slideshow with my pictures and then burn it to a dvd?

Apple's builtin "iPhoto" application can do that easily. Open iPhoto and click on "Help" at the top of the screen for assistance in creating it.
Hope this helps

How can we make 1 window to be displayed on top of other window in smartfor

Dear friends,
How can we make 1 window to be displayed on top of other window in smartforms as i m not getting content of a window which is placed above other window?

Hi,
There r two ways ways to display image.
1)As background image
2)using graphic node.
To display image as background.
click on page node.
choose background picture options
enter the path of the image.enter the resolution and output mode in the output attributes.
enter the horizontal and vertical positions where the image to be displayed in the page.
To display image using Graphic node.
Add a graphic node into the window where u want the image to be displayed.
In the General attribute enter the path and the resolution.
Hope ur problem get solved.
Regards,
shiva

How do I make multiple screens transition?

I have figured out how to make multiple camera angles play onscreen at one time, but I would like the layout to change while the video plays, how do I do this (or at least get started)? I realize that this is probably basic, but I am making the move from basic editing in iMovie and it is proving painful.

OK, so I am making a demo video for my live music show.
I have three angles, one front, one of the guitar, and one of my feet.I have all three playing onscreen simultaneously in three screen panels on the main video screen.
If I export it right now you see all three angles playing at once
The layout is such that one angle is larger than the other two.
I would like, at certain points in the video, to have the emphasis change, and have the video transition to one of the other panels getting larger, and the big one getting smaller.
Does that help?
Brady

How do you make multiple folders in the photo app-

the question speaks for itself.also, how do you sync multiple albums onto the phone?

The way I sync folders is this (I know it may not be what you are looking for).
But in iTunes you can pick a folder to sync to. For me I made a specific folder just for my iPhone.
Any pictures I want on my iPhone I put in that folder (copies).
And then in that folder you can create subfolders (to organize). Note though you can only go 1 subfolder deep. You cannot put a subfolder in a subfolder.
So for example:
C:\DATA\iPHONE This is the folder for my syncing.
I can create
C:\DATA\iPHONE\FAMILY
C:\DATA\iPHONE\FRIENDS
C:\DATA\iPHONE\ABSTRACT
C:\DATA\iPHONE\NEWYEARSPARTY
But I cannot create
C:\DATA\iPHONE\FAMILY\WIFE
Then you just put pictures you want sycned into them. Sort of better to work with copies and have a folder specific for the iPhone I think. At some point you will want pics removed from your phone and far easier to just delete them from the iPhone specific folder than if you went to route of syncing to the folder you actually store photos you want to keep forever on your computer. Having a specific folder with copies means you can delete and add at will and know your real memories are elsewhere.

How do I make multiple buttons in my flash animation?

I am new to flash, and I have no training in it whatsoever. I
created a flash animation with flash CS3 for my photography
website, and I want to link each of the images to different
galleries on my site. When I created my first button it worked
fine, but when I try to create actions to link more than one image
as a button, keep getting an error that says "1021: Duplicate
function definition." How do I make each image as a separate
button?
I used the video of this tutorial as my guide to learn how to
create a button:
http://www.adobe.com/designcenter/flash/articles/flacs3it_firstflash_pt1.html
Also, when I run the animation to test it, it loops, and I
don't want it to loop. How do I stop it from looping?

I used the method shown in the tutorial I mentioned to create
it (created a new layer for the button, selected the area of the
image for the button,used modify -> convert to symbol
-> button, I edited it so it was an invisible button by
moving it to the hit frame, gave the selected area an instance name
of Hizumi_btn, inserted a new layer for actions and added the code
I have attached to this post.
I assumed that I would just need to repeat this procedure for
each of the other images in my animation, but when I did that I
received the error.
I greatly appreciate any help you can give me.
Thanks for the information on how to stop the animation.
Here is the code I used to create my first button.

How do I make multiple start up disks

I've partitioned my Imac(intel) for lion and leopard but can only start up in leopard. how do I make both partitions start up disks?

babowa wrote:
Frankly, I'm stumped because I didn't know that Time Machine backups are bootable?
The backups aren't, but when you restore them, the result is bootable.
And, effective with 10.7.2, if you back up to a directly-connected external HD, Time Machine copies the Recovery HD to the Time Machine drive, so you can start up from it if your internal dies.
Take a look at this site (in particular scroll down to Time Machine):
Just for future reference, since Apple's dropping web hosting via MobileMe, I've moved my site.
The new version is at http://pondini.org
I'll leave the old one "as is" for a few days, then put redirect notices on it until it goes "poof" in June.

How do you make a slideshow with pictures & videos?

ok, i'm new to mac & video editing. i want to make a slideshow with pictures & @ the end of it, i want to put in a clip from a home video. if i put the home video on a DVD, will i be able to edit it? i know i have to edit the video in imovie but where do i go from there? can i import it into iphoto & make the slideshow there? if so, how do i save the imovie project as the right file type so i can import it into iphoto? if i can't make it in iphoto, what program do i use? i want the slideshow to be able to be viewed on a PC also.

Welcome to the Apple Discussions. As already mentioned you'll need to use a 3rd party slideshow application or iMovie.
However, you can create a slideshow in iDVD with stills and a video clip as iDVD 7 (08) now permits both stills and movie clips to be placed in a slideshow. This screenshot shows multiple video clips in an iDVD slideshow but you can also have stills and video clips.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How can I make a slideshow of animated slides in Edge?

I've watched Paul Trani's great tutorial on making an interactive slideshow of images in which people can click through the images (https://www.youtube.com/watch?v=teYOHY5bGyk) and I've made a nice slideshow.
But I now want to make a slideshow just like that but use animated Edge compositions instead of JPEGs or PNGs for the slides that will play when that slide appears . . . does anyone know how to do this?
Thank you so much for your help!

Erin, most of Pauls tutorial demonstrations ave source files available for download.
For that particular slideshow demo, it is here http://paultrani.com/2013/07/how-to-create-a-slideshow-in-edge-animate/
Darrell

How do I make multiple slideshows on multiple displays?

Similar Messages

Maybe you are looking for