How do I make my all-in-one HP printer wireless for my laptop?
I have a HP Photosmart C7250 All-in-One printer. Just bought a HP Pavilion dv6-6113ci Laptop. I have a Netgear modem. Instructions in book to convert to wireless is in Greek to me. Is there an easy fix to making my printer wireless??
Hi,
What are you trying to fix ? What is your Netgear modem ? Does it have wireless router to go with it ? Please check this book and select one suitable connetion for your existing hardware.
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
You may be able to setup like this (if no wireless router):
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
How do i make my hp laser jet p1102w printer wireless using bright house modem
How do I make my printer wireless without having to hook the computer to the printer. I have the Bright house moden and internet services.
Hi,
The printer supports wireless connection. Please use information from the following link to set it up:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02847467
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
8600 all in one not printing wireless
My 8600 printer is not printing wireless. We moved and it was set up with the new router and it printed once. It has not printed since. I have turned it off and back on. I have uninstalled and reinstalled. I did scan doctor and it told me to uninstall and reinstall. I can look at the info online after typing in the IP address and it all looked ok. I still cannot print. Please help! I am not very computer savy. I cannot print e-mails, from a web site, or word. Thanks!
Hi @mtmom , and welcome to the HP Forums!
I understand you're experiencing wireless connectivity issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
I would also recommend this document on Wireless printing center Troubleshooting Issues.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones appear?
only way is to restore the phone as new. OR wait until IOS 7 comes out in the fall.
-
All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?
That is the way the iphone works.
You need to copy everything from your backup copy of your computer. -
Hi! I just bought a new iPhone and I was wondering how i can make sure all my pictures and music will be transfered from my old iPhone to my new one?
Pictures are held in the iPhone backup. If you backup the old device just prior to the activation of the new one, then restore from that backup, the photos will be there. Music is in iTunes on the computer and when you do the restore, it will download the music from iTunes to the device during the restore. Make sure any music purchased on the iPhone that has not been transfered to iTunes on the computer is done before beginning the restore.
You can also view information in this support document http://support.apple.com/kb/HT2109 -
i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??
You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.
-
How can I make two Canvas in one Window ?
I want in the main window ( that is only window in the module ) press button to appear another canvas.
but that I can't make it , I just made two window until the another window appear.
that's all
I tried with :-
show_view('canvas_name');
but didn't work with me Sad
the another canvas made it stacked Canvas .... but also didn't work Sad
so please , How can I make two Canvas in one Window only ?
and thanks in advancethis code work with me :-
show_view('canvas name');
go_block(block_name');
execute_query;
for HIDE button u have to write...
hide_view('canvas_name');
but
that not exactly what I want ...... I want the stacked canvas appear like second window , and could control on it like window .... it could be possible ???? -
keep on getting double notification from my default mail app, and gmail app, how do i make google my primary one? so that i dont have to get doulbe notifications on both apps
This is probably not the answer to all your questions, but I am sure it answers some.
Unlike Word and InDesign, FrameMaker's anchored frames, which hold graphics, "hang" from their insertion points, typically at the end of the paragraph. An anchored frame that follows a paragraph is set to be below the line, the line being the last line in the paragraph. If you turn on View > Text Symbols, you will see a marker that indicates the point from which the anchored frame is hanging.
If the anchored frame is taller than the available space, it is moved to the next page ALONG with that last line. If the paragraph style/tag has a widow/orphan lines number that is more than 1, then that number of lines are also moved to the next page, because the paragraph tag says to keep that many together, EVEN if there is space at the bottom of the previous page.
So, you can set the widow/orphan lines number smaller OR as you have done put a blank line before the anchored frame, which now holds the marker for the anchored frame, and set its font size to 2 pt (the lowest FrameMaker allows) and its line height to zero. This is the standard workaround UNLESS you use the line above the anchored frame as the title/caption of a figure, which is also a typical way of dealing with FrameMaker's ways.
To my knowledge, one cannot change the default of the checked cropped box. Maybe others know of some way to change this.
There is no page break in FrameMaker, hence there is no symbol for it. In the paragraph designer for the paragraph, you set to Start of the paragraph to Top of page. Top of page is FrameMaker's equivalent to a page break. To "remove" a page break, set the Start of the paragraph to Anywhere.
Since you are new to FrameMaker, I suggest reading throught the User Manual that comes with FrameMaker. You will likely find the answers to most of your questions there.
Hope this helps,
Van -
How do i use my mac book with my HP 6510 e all in one series printer
how do i use my mac book with HP photosmart 6510 e all in one series
Hello Marilynatsea,
Thanks for using Apple Support Communities.
To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
Mac Basics: Printing in OS X - Apple Support
Cheers,
Alex H. -
I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location. They are pictures taken at different times and have the same number I guess.
In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
LN -
The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?
Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis -
I bought my daughters new iPhones (4s) for Christmas. They love them except that when another iPhone user text one daughter, the other daughter gets the messages and same for the other daughter's text. How do I make these independent of one another without putting my family on separate ITunes accounts?
When you were setting the phones up you should have been asked if you wanted to use the phone number or an email address for FaceTime/messaging. My guess is you used the same email for both phones. Just go in and change it. That or you have the same iCloud id on both phones, I'm not using the cloud so I can't help you there.
-
How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks
How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks
This occurs when the printer is not aligned completely.
Please follow the steps mention in the link below to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01336348&cc=us&lc=en&dlc=en&product=428800&tmp_...
Please mark the post that solves your problem as "Accepted Solution"
Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever. -
How do I keep my HP1510 All-in-one from printing so many test pages?
How do I keep my HP1510 All-in-one from printing so many test pages? My printer is connected to my laptop, and it seems that every time I disconnect, the printer wants to print an test page when I reboot. I don't know where the option is to turn this off.
This question was solved.
View Solution.The pages are likely alignment pages. When a new cartrdige is installed the printer will print an alignment page that must be placed on the scanner glass and the Scan button pressed to complete the alignment process. If the alignment is not completed it will repeat when the printer is turned on or perhaps at the end of print jobs.
The alignment page will stop printing when the alignment process has completed. See the page here for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Maybe you are looking for
-
Just tried to download and install latest ITunes update and it would not finish update. I aborted the update and then my ITunes will not open. I keep getting and error stating that file MSVCR80.dll not found. I reinstalled my original ITune file but
-
Im about to go on tour and i want to use my 1814 to out put 3 sets of stereo outs on stage one stereo 1/2 for Drums and stereo 3/4 for Keyboard parts and stereo 5/6 which i can select in logic on the tracks but i don't seem to know where to plug t
-
Cl_gui_alv_tree no child nodes after registering event
Hey guys, I have an uncommon problem with cl_gui_alv_tree. My tree has 2 layers, Root and child. Both of them have layout-class cl_gui_column_tree=>item_class_checkbox. Everithing works fine! (without_events.jpg) But if I register event "checkbox_ch
-
How to play movie immediately?
I'd like to create a project with no theme--i.e., have my movie start up immediately (and loop). Is there a way to do this? If it matters, I'm exporting from iMovie- Thanks! Mark
-
I recently purchased an album from iTunes store however...
when I look at other album by the same artist with the same songs (listed in other albums other than the one I purchased) they are listed as purchased even though I never bought them from that album... anyone else having the same issue?