How do i make my clips have stereo audio again?

I've been building a project and i'm about half way done. All of my video clips were imported with stereo audio and until now they have been stereo when i drag them down to the timeline, but for some reason, now when i drag them to the timeline they become mono tracks. They are still stereo while they are in the browser, though. Even when i drag a clip that i used earlier in the timeline (when the clips stayed stereo tracks) it comes up a mono track. Did i change a setting? or is there something i'm not doing or doing different? How do i get my tracks to be stereo again?

Do two tracks go to the timeline or one? Are both tracks connected in the path panel at the head of the timeline? Are the clips stereo pairs or dual mono?

Similar Messages

I want to know why some box of Iphone5s it's not come full accessories in box simple my iPhone 5s I have bought from Apple store last week it's first time for me use iPhone but so surprise me how the company make the phone have to use a pin to open

I want to know why some box of Iphone5s it's not come full accessories in box simple my iPhone 5s I have bought from Apple store last week it's first time for me use iPhone but so surprise me how the company make the phone have to use a pin to open the sim but didn't give a pin inside the box and I ask staff at store their said they also don't know some box have some of are don't have a pin come together so then they told me I have to find solution or I have to buy a pin by my self I can buy it by myself but I really don't understand how come apple big company but how it's happen like this?thank you.

Where did you purchase this. The US phones do not come with the SIM removal tool anymore. They haven't for some time now. I'm not even sure it comes with any of the devices anymore. You can just straighten out a paper clip and do the same thing.

How do I make a clipping mask whilst preserving sub layer structure?

Hi guys,
I am editing a map and need my map split into multiple rectangular segments. My map is made up of many layers and sub layers which I need to preserve. When I clipping mask the map with a rectangle all of the map's subs layers merge into one layer. How do I make a clipping mask whilst preserving sub layer structure? It seems like a 'layer mask' is the correct tool but doesn't seem like CS6 has it?
Cheers
Mat

I avoid sublayers, because they really were never thoroughly developed, and when you open files, you get all your layers flipped open.
So for me paste in front works great for pasting a mask directly above the element you want to mask. Unfortunatley paste in front does not work well with sublayers so you will need to drag the mask down into the the sublayer. But atleast if you have a complex document with many sublayers, the paste in fornt gets you close.
eg; Mask is in clipboard, I select sublayer Illinois
After doing a paste in front, the mask (star shape) is not in the sublayer, but above
Drag the star shape down one in to the sublayer Illinois, select entire sublayer(use radio button right of the layer name)
and make clip mask

How do you make a clip move on a frame

how do you make a clip move on a frame

777
It is not clear what you are asking about. Could explain another way?
Please start with what version of Premiere Elements you are working and on what computer operating system it is running?
From what you wrote, I am not sure if you are saying
a. The Timeline Indicator is stuck and will not more from left to right when you try to play back the Timeline content in the Edit area
or
b. You want to create an animation
or
c. You are doing a Picture in Picture (PiP) and want the picture (or video insert) to move to different locations within the frames over the course of
time.
or
d. Other
We will be looking forward to your clarification with details so that we can give you the information that you seek.
Thank you.
ATR

I updated to iOS7 and my deleted photos came back. How do I make sure this doesn't happen again?

I updated to iOS7 and my deleted photos came back. How do I make sure this doesn't happen again? I want to get rid of the ones I already got rid of, but if they just keep coming back that will be a waste of time.
Can anyone help?
When I sync with itunes, the photos sections says I am syncing with my iphone, so I assume that anything I physically delete from my iphone should not be showing up again. Right?
Thanks in advance.
CM
PS- I don't use iphoto.

Is that really how sync works?
If you read this, http://support.apple.com/kb/ht4236 and this http://support.apple.com/kb/TS1314 they don't actually make how sync works very clear. I had thought that syncing my device to itunes would allow I tunes to copy what was currently on my phone so that I could restore that information when needed ie if your phone dies and you need to do a clean install of the iOS system, you always have what is currently on your phone saved in Itunes.
Specifically reading this:
To delete Camera Roll photos and videos from your device
There are two methods to delete items from the Camera Roll:
Import the Camera Roll to your computer and choose to delete items after import.
Delete photos and videos from your device manually:
Open the Photos application and open the Camera Roll.
Tap the Action button.
Tap each photo to select it.
Tap the Delete button.
Note: For photos and videos you want to save, import them to your computer before deleting them from the Camera Roll.
What you seem to be saying is that iTunes saves every contact, message, photo etc and when you click sync, it reuploads things that you deleted? This seems like it should work the opposite. Make a mirror image of my iPhone on my computer, not make a mirror image of my computer onto my iPhone. You delete things for a reason.
Help- anyone else? Is razmee209 right?

Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?

Since updating to ios7 i can no longer partially download emails and this is using up all my data plan. How can I make Mail only be partially downloaded again?

YEA! My jurryrig worked! To all with this problem:
You CAN have podcasts in a regular playlist IF you convert them to a standard MP3 first. So, yes, a lot of manual labor
The good news: if, like me, it is a track that you listen to frequently (in my case meditations for sleep and relaxation) then the time is worth it. I will mess with automator later to see if there is anyway to script this! Then, less work for me and more for my mac.
Here are the steps:
Select the file from your Podcast folder.
Change all data you need -- "artist," "album" etc...
Make a copy of the cover art for this file by dragging it to the desktop.
Select the Advanced -> Convert ID3 Tags menu item.
Check ID3 tag version, and select "v1.0" from the drop-down menu.
Drag the file to the desktop (this will make a copy of the MP3 on the desktop)
Delete the file from the iTunes list.
Drag the copy of the file you have on the Desktop back into iTunes.
Search for the file in the Library, and add the cover art again to the file.
Now the file is out of the Podcasts folder and works like a regular MP3 file inside iTunes. You can re-add it back to playlists!

How can I make my print job go fast again?

How can I make my print job go fast again? Since february when there was a update for snow leopard, all of my print jobs almost take forever to finish.. a pdf file 10MB size will take about 1 hour to send to the printer that is a Nashuatech mp c3500.
And yes, if the pdf for example is 20MB size, it will take about 2 hours to get it done..
My equipment is:
Macbook pro OS X 10.6.8
Nashuatech NRG MPC3500

Sometimes, Software Update doesn't apply updates entirely correctly, and odd issues can happen.
You might download and install the latest combo update for 10.6.8, which is at http://support.apple.com/kb/DL1399 . Before installing, bring up Disk Utlity (on your hard drive in applications/utilties) and repair permissions. Install the update, then repair permissions again when done.

How do I make a clip "independant" in FCP 7.0.3?

I have two imported DV clips.
- One is 45 minutes long
- One is about 15 minutes long
I want to break these two captured files up into "chunks" so I can edit them in the timeline without even referencing the original DV clips.
Reason: editing nightmare I am trying to resolve.
- I know how to use "mark dv start/stop" in each DV clip to segment my DV clips into my original "shots" on DV tape.
- I know how to make "subclips" from the 'segments".
What I don't know how to do is to make these new clips TOTALLY independant of the source footage because my edits are getting completely messed up. Someone suggested I make the new segment clips "independant" clips, but I can't seem to find that option anywhere.
Any suggestions?
thanks

Thank you ALL!
These are some of the best answer I have got so far, but let me run a few things by you and see what you think...
My original, orignal question was something like "How do I import and break up my video so I can edit my shots on the timeline?"
My real goal, as you might guess, is to make FCP do the grunt work so I can get my "shots" from the DV camera into the timeline so I can cut them, move them around, synch them to audio etc. That's why FCP is called a non-linear editor. Right?
I really don't want to have to export and then reimport a bunch of video clips because that's a lot of work for ME. I know that you can do this, and I know how to do it, but come on! I want to make FCP do that work, and theorietically it should be able to do this.
From digging around on the internet, and from asking multiple questions on this forum, here is the workflow I have peiced together. (I am not sure if it will work yet because I still have to test it...)
I think the complete answer is:
1) Capture video to a project (the whole tape)
2) Select the master clip (the whole tape) in the browser and choose "Mark/ DV Start/Stop" (just like you said)
3) Select the resulting video "segments" in the browser and choose "Make Clip" from the modify menu (this converts the original captured segments into subclips)
4) Select the resulting video subclips and drag them to the timeline for editing (I am not sure if I also need to "Remove Clip Limitations" from the subclips as well, but at least I know where to look if my 5 steps don't work)
5) Right click on the video subclips in the timeline and choose "make independant clip"
The bottom line is that I am trying to get FCP to do the grunt work of keeping track of my video ins/outs, segments, subclips and independant clips without me having to manage 100 files on my hard drive in the project folder! The whole point of NLE is to let the computer figure out how to arrange and render all of your stuff based on information that is stored in the FCP file.
Thoughts?

How do I make a clip from a finished DVD to post online?

I would like to make a clip (30 seconds??) from a DVD I made. I would like to show the menus and how they navigate to the DVDs content (main movie). I need to post the clip on my website.
Can someone get me going in the right direction?
I know how to make clips of the content but I want to show the menus in the clip also...
I have iLife 6

I also have this question. Avid lets you change the frame up/down - to/from a dissolve point. In other words, I could have a dissolve go "up" at, for example, 5 frames, and then "down" at, say, 15 frames. As it stands now, FCPX only allows you the same amount of frames on either side of the cross-dissolve. (A 30-frame dissolve is split 15 frames on either side of the transition.)
Other NLE's give you the option for a dissolve to occur at the BEGINNING, in the MIDDLE (STANDARD CROSS-DISSOLVE) or at the END of a transition. (Depending, of course, on if you have the "handles" to execute the transition,)
Can we achieve this in FCPX? Is this where we launch the "precision editor?"

How do you make a clip slow down

I'm new to final cut so I hope this question(s) isn't too naive. First of all I have imported a clip that has a world turning right before a transition into something else I don't want (ie I only want the world spinning). But whenever I select the range I want, and remove the rest, if drag the desired clip longer the old (unwanted material shows). So clearly I'm not cutting or deleting properly. Assuming I have the clip I want, the other problem is that I'm trying to match it to audio which is considerably longer (like 6 minutes versus 40 seconds). There is no obvious place to cut and make a copy (loop) without it being noticeable, so I thought it might be better to simply make the clip run in slow motion and match the duration to the audio clip. How do you do this?

Simple. Select the clip (or portion of the clip) you want to slow down. Go to the "Modify" menu, then go to "speed." Type in a new percentage (50%, for instance, will make the clip run at half speed). I also suggest checking the "frame blending" box....it should make the slowed-down clip look smoother (you can try it both ways and see what looks best to you). Then render the clip (from the "Sequence" menu) and you're done.

How do I make a clipping path around a feather or hair?

I want to make a clipping path around a person who has hair blowing in the wind. How can I make a good clipping and get close enough without losing the effect?

This is a good tutorial:
http://www.graphic-design.com/Photoshop/remove_backgrounds/index.html
There are many others such as those in here:
http://forums.adobe.com/thread/370974?tstart=0

How do I make a button have a permanent down state?

How do i make it so when you when you click on the button it
changes the button..
for example
normal > red
rollover > green
when clicked > stays blue

I solved that problem by making the down state an actual
frame in the timeline.
ie. I want something to happen when you press the button.
That something is going to happen on frame 10 and the button is on
frame 1-9. Make a Layer called ACTIONS. Then while on that button
frame range (1-9) and after selecting that button, in the Actions
panel I put
on (release) {
gotoAndPlay(10);
Then I select the ACTIONS layer I created and put a
stop();
at frame 9... so it waits for the button. you could just send
it back to frame 1 if you want an anim to loop.
Anyway, on Frame 10 (when that button is pressed) I replace
it with what it stays with... the down or SELECTED STATE button.
This was how fixed my buttons to stay down.
there is probably a better solution somewhere.

Hi. how does one make sure photos have been uploaded to I cloud

trying to update to IOS 8 on my iphone 4s from IOS 7.1.2. cannot due to storage requirements. asking me to delete items. what should I do? most are photos how do I make sure they are now in cloud and can be safely deleted from phone storage.

Be very careful.
Only the last 1000 photos maximum are stored in iCloud and for a maximum of 30 days.
In the new version of iCloud Photo Library (which is in Beta) it will keep all photos, but you are not using that version yet as you need iOS 8 installed to do that.
The best thing to do is connect your iPhone to your computer and transfer the photos from the photo to your computer.
The instructions on how to do it are here:
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC

How can I make my clips burnt to disc play through without having to pick clip titles from the menu?

I burnt some clips from iDVD to DVD and want to know if anyone knows if there is a setting to make the clips flow through instead of having to go to menu and pick each clip?

Two ways:
1 - join the clips together as one file with Qjuicktime Player, iMovie or other app designed for that and use the single clip.
2 - create a slideshow in iDVD and add the clips to it. Set the slides display time to anything except manualliy. Do not add a transition or music.
OT

How do you make a audiomixdown of 4 Audio Tracks in a Sequenz ?

I have the following Problem.
A Sequenz with 4 different Audio tracks. 2 Tracks with ambience sound,1 channel with voice over and 1 channel with the interview sound.
For the final playout i need on channel 1 the final mix of all 4 tracks and on channel 2 the IT Mix (ambience sound and Interviews sound).
Now my question how do i make a audiomixdown of the different channel , with the Avid mediacomposer it is quite easy you select the desired tracks and make a mixdown. Is there also an mixdown option in Finalcut?
Thanks for the help.
Jan

Welcome to the forums.
Well, you can ASSIGN what audio channel the various tracks of audio get output to. But I don't think you can do what you are asking. Because once you assign track 2, 3, and 4 to go out CH 1, then you cannot again assign them to go out to CH 2. The sound can only go out one channel at a time.
Best thing would be to export AIFF files from the timeline with all the tracks you need...turn off the ones you don't need when you export for CH2.
Shane

How do i make my clips have stereo audio again?

Similar Messages

Maybe you are looking for