How do I make my HP PhotoSmart 3210 printer wireless Network

How do I make my HP PhotoSmart 3210  printer wireless. It has an Ethernet port which works fine but I want to print on my current wireless network. Can you use any wireless router of G or N? What else can I use? I'm looking for the cheapest option. Also, It has bluetooth, can I use any USB bluetooth for that to work.? I would rather use my network but if all else fails bluetooth will have to due
I am currently runnning windows 7 if it matter. But, I don't think it does.

Hi,
Buy a new wireless printer could be much cheaper and no headache. Or you can try something like this:
    https://www.google.com.au/search?q=usb+wireless+print+server&hl=en&tbo=u&rlz=1G1GGLQ_ENAU282&source=...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • How do I make my HP photosmart D1110 Printer wireless for when I print?

    How do I make my HP photosmart D1110 Printer wireless for when I print? I mean I dont want to plug my printer up every time I need to print something. I know i can do this with my printer because my uncle had it hooked up this way before he passed away. Now im trying to hook it up again and I cant figure it out.

    KristiGilreath wrote:
    I tried following the steps but I didn't havesome of the tabs it was talking about. I just dont understand.
    Hi,
    Which type of connection you want to use ? Which tabs are you talking about ? I could not find full specs of your printer, how old is it ? Do you use a wireless network at home ? As mentioned above, I don't know your existing hardware therefore you need to check the book and select a suitable connection first.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I change my HP Photosmart C4580 printer wireless settings using the apple provided drivers?

    I have a mac pro running the Yosemite OS.  I have a HP Photosmart C4589 all in one printer that had been working fine until I replace my router.
    Now I can only use the printer as a usb.  I know I need to change the wireless settings in the printer but have not learned how to do so.
    The printer software is not compatible with Yosemite so I cannot use the hp software to change from usb to wireless.
    Based on all that I have read I tried to download replacement hp software and still had no way to change the printer wireless settings. 
    I uninstalled that software and went to Apple and downloaded drivers but there is no software that will allow me to change the printer wireless settings.
    What can I do now?

    From the front of the printer (probably the Wireless or Network menu), Restore Network Defaults.
    Now on your PC:
    1. Start > Control Panel > Printers - delete the printer.
    2. Start > All Programs > Hewlett-Packard > [C4500 series] > Add a Device.  You will want to add a network device.  Eventually it will ask you to connect a USB cable to the printer in order to communicate the network info to the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can i make a email for my printer

    how can i make a email for my printer to send the things to the email and get it printed if i was out of the house my printer model is 3525

    Hi alhashmi_sy,
    Welcome to the HP Support Forums. I see that you would like to learn how to setup the ePrint feature of your Deskjet Ink Advantage 3525 printer.
    The first step is to connect your printer to your wireless network. Please follow the steps in the Installing the Printer Software for a Wireless Network Connection document for your operating system. If you have already setup your printer with a USB cable, each operating system section has the steps to switch from the USB connection to a wireless connection.
    After connecting the printer to your wireless network please follow the steps for Getting the Printer Claim Code. Once you have the web services information sheet with your claim code please Set Up a Custom Email Address for ePrint.
    You should now have a customized ePrint email address for your printer. If you run into any issues please let me know at what step things went awry and the contents of any error messages. Please also let me know what operating system you are using on your computer (whatsmyos.com). Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How can I make signature darker when I print the report?

    I need to put my manager's signature on the report. The signature is too light, How can I make it darker when I print the report?
    I used file link and OLE, both did't make it.
    Thanks.

    No way to do it directly in the report. You need to work with signature image file using any graphic software to increase its contrast. The easiest probably would be to use Paintbrush and change the image to black-and-white, then save back as jpeg file.

  • How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1

    How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1
    A senior citizen needs some help.
    Thanks

    Saving each image as different size - is it an option for you?  I would save images with their name as: 20x30.png, 16x20.png etc etc.
    Or explain whether you want these in a webpage  in which case only one image is necessary and different sizes are displayed with good CSS code.  this is question for Dreamweaver forum if this is what you want.

  • How can I make US letter the default print size in PSE12

    How can I make US letter the default print size in PSE12

    Clips from JVC Everio camcorders have always had this problem with Premiere Elements (all versions). You need to select Interpret Footage.
    See this FAQ from PE version 2, step 3. Like I said it has been this way with all versions:
    http://www.adobeforums.com/webx/.3bc1265c
    You might be able to use this tool to change the header of your MOD files so they are seen as 16:9: http://www.videohelp.com/tools/DVDPatcher
    Or use this program (SDCopy) to download the video's from the cam, it will allow you to copy straight from the cam to your PC and auto renames and corrects the aspect ratio.
    http://zyvid.com/smf/index.php?action=dlattach;topic=280.0;id=153

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • How can i know the exact model of my wireless network card? macbook pro 13"

    how can i know the exact model of my wireless network card? macbook pro 13"

    I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
    charlie

  • How do I make my IPhone4 print wireless to Photosmart B209 prints wireless no problem my MacBookPr

    How do I make my IPhone4 print wireless to  B209 printer  - works fine wireless
    to my MacBookPro

    Hey Scoobydo,
    1. You can download the HP ePrint Home & Biz app to your iPhone4 from the Apps store.
    2. Now install the app.
    3. Now you can pull up a document or a photo and select print.
    4. The App should see your printer if you are on the same network.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

    Hello,
    I have a Mac and PC Network composed of:
    iMac 24'' Leopard 10.5.2 (main computer)
    2 PC Fujitsu Pentium 4 on Windows XP
    2 PC HP Pentium 4 on Windows XP
    my network/connections are done via Airport Extreme and 2 hubs (other devices connected to the network like Wii, XBox etc.)
    I am trying to share my HP Photosmart 3210 using the USB connector on Airport Extreme but I am experiencing strange problems while printing from the iMac. I can print an e-mail or a "light" document however if I want to print a Mac powerpoint (Mac office) largest document, the problem starts after the second or 3rd page, the printer goes on pause at the middle of the page and the interface indicates "problem communicating with the printer" or something like that.....unique possibility is to turn the printer off and start again but the problem persists. However, it seems that the printer works ok from the PC's.
    I have tried to install the latest versin of the HP driver on my iMac but while configuring, the printer doesn't appear....I have checked on the printer settings and the IP address is 0.0.0.0.
    I am now thinking about connecting the Printer via one of the Ethernet port on Airport Extreme.
    Questions:
    1. Any help on the above ? Any advice ?
    2. Is it normal to have no IP address on the printer when connected via USB on Airport Extreme ?
    3. Why HP config doesn't recognize the printer on the network ?
    4. Why does it work from the PCs and not from the iMac and why does it print light documents and not big ones ? Is this a memory7buffer problem on the printer ? What can I do if this is the case ?
    5. On the Airport Extreme Utility, do I need to share the printer via "Bonjour"?
    6. I am willing to plug an extrenal HD on the Airport Express USB port. Is it possible to put first a multi USB port on the Airport Extreme USB or is it going to cause problems ?
    Thanks a lot for your help.
    P.
    Message was edited by: vador300
    Message was edited by: vador300
    Message was edited by: vador300
    Message was edited by: vador300

    NCBob, Welcome to the discussion area!
    If I understand correctly you are replacing the Linksys. It should be a simple replacement. Connect the cable modem to the WAN port on the AirPort Extreme base station (AEBS). Connect your Ethernet devices (including the switch) to the AEBS LAN ports.

  • HELP wirth PhotoSmart 3210 printer gone nuts

    This printer was sold to me at a tag sale. Then the lady never cashed my check. THEN she told me if it didn't work, I could give it back to her. Well, I had a few problems in the beginning which I thought I had worked out. Then, last week, colors went nuts on it. An RGB tonal scale of photography's Zone System that was in purple -- with areas of texture in each square -- printed out with some of the squares in a green, almost teal color. The texture was missing from one green square and one purple square that were right next to each other while the remainder had preserved the texture.
    I did a diagnostic print and magenta was hardly printing. I fixed that by holding down the OK, Cancel, Color and B/W buttons all at once while powering off the machine, then powering it on again normally. This sends the printer into a 5 or 6 minutes cleaning cycle of some kind. Magenta then printed out normally on the diagnostic sheet. I went to the calibration menu and not one of either of the squares printed normally after restoring factory defaults. Instead, all the squares in the big rectangle printed a shade of light teal while the ones in the bottom square printed out blue shades. Therefore, there was no way to enter any of the letter/number combinations.
    I figured it needed servicing, but the Service Locator phone numbers are all redirecting to me to the same, constantly busy, phone number.
    Can anyone give me detailed directions on how to correct this problem?
    Many thanks!

    The printheads on the Photosmart 3210 are not removable.  From the description of your issue it would appear you may have an issue with the ink tubing that connects the ink supplies to the printhead.  In that case your printer would require service.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How can I make my Mac Book Pro print to a Panasonic KX-MB772?

    How can I make my Mac Book Pro OSX 6.8 talk to a Panasonic KX-MB772 printer?

    You can't. The KX-MB722 is one of the few remaining printers in the class of devices called "Windows Printers" that has no on-board printing software -- it relies on a host computer to provide all of the software functionality and Panasonic only provides such software for certain versions of Microsoft Windows. In this case, it means a 32-bit version of Microsoft Windows (2000-XP, though it will probably reliably on Windows versions up to 7). Note that these devices are not guaranteed compatible with future versions of Windows either (Panasonic has already dropped software support for this model).
    I'm pretty sure that the device doesn't support remote printing without the software either (e.g., you can't setup a computer with Windows on it, share the printer, and then print to the shared printer without their software).

  • How to connect Photosmart C4795 to Wireless Network - Mac OSX 10.8.4

    I am desperately confused here!  When I bought the printer 2-ish years ago I was able to set it up and have it connected to my network no problem.  Since then I have moved and updated my OS to Mountain Lion and lost my installation CD.  As of now, this is where things stand.
    When I turned the printer on and connected it to my iMac via the USB cable, the computer found it and installed it with no issues.  I can print with no issues when the USB cable is plugged in.  
    Using the printers built in display, I have run the HP Network Configuration and the Wireless Network Test.  The printer can see my network, but it won't connect to it.  I have no bloody idea where I need to go to enter my network password so the printer can get online.  
    I've manually downloaded the HP Driver found at http://support.apple.com/kb/DL907  and that put the HP Utility on my computer (which was already there) but I don't see any place in the utility software that would let me enter my network password or even configure network settings for the printer. 
    My router is an Apple Airport Extreme, and the firmware is up to date.  Everything on my computer seems to be up to date.  I just cannot for the life of me figure out how to get this thing online.  Any help would be greatly appreciated =)

    Yup, there is no way to install your printer using OS X 10.8, sorry.
    However, there are alternatives.  Here is the easiest way:
    1. On the front of the printer: Setup [Scan] > Wireless > Restore Defaults.
    2. In the same Wireless menu, start WPS Pushbutton.
    3. On your Mac go to Applications > Utilities > Airport Utility.  Choose your Airport and click Edit.
    4. In the menu bar at the top of your screen go to Base Station > Add WPS Printer.
    5. Choose the FIrst Attempt mode, then Continue.
    Now your printer should be connected to your wireless network.  Next, go to System Prefs > Print & Scan, click the '+' sign to add your printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How can I make my PB G4 Titanium connect wirelessly to a WRT54G?

    I have searched and googled through forums but I can't seem to make my PowerBook G4 Titanium (10.4.10) connect to my WRT54G at all. It seems the best way is to use WPA-Personal with TKIP and password but all I get is [The wireless network "xyz" does not support the requested encryption method]. I have tried AES and AES+TKIP but same problem. Has anybody got it to work? Any ideas?
    Thanks in advance,
    Adrian Madrid

    Thanks for the information.
    The first link did not relate to wireless connections, though. I must say that the router it is running just fine for wired connections for a wired Mini and a wired PC (Windows XP) as well as a wireless PC (Windows XP) laptop. And I can connect just fine these two laptops if I use a wire. But I just can't get the PB to connect wireless.
    The second link did mention wireless security and I have tried setting up WPA Pre-Shared key with TKIP and AES but my PB keeps saying that [The wireless network "XYZ" does not support the requested encryption method].
    The third and fourth links mention bugs with the firmware and DHCP. I have the latest DD-WRT firmware installed (RC3) and I have tried using DHCP and fixed IP addresses but I believe the problem is actually connecting to the network first.
    Any other ideas?
    Thanks in advance,
    Adrian Madrid

Maybe you are looking for