How do I make my IPhone4 print wireless to Photosmart B209 prints wireless no problem my MacBookPr

How do I make my IPhone4 print wireless to  B209 printer  - works fine wireless
to my MacBookPro

Hey Scoobydo,
1. You can download the HP ePrint Home & Biz app to your iPhone4 from the Apps store.
2. Now install the app.
3. Now you can pull up a document or a photo and select print.
4. The App should see your printer if you are on the same network.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Similar Messages

  • How do you make a MacBook Pro talk to an Epson printer?

    MacBook Pro
    OS X 10.6.8
    (Thinking about getting  another MacBook)
    I had an Epson Artisan printer, got an Epson Workforce WF-3640 new in Jan, hardly used because I cannot make it do what I want it to do. Wireless connection is good.
    With the MacBook Pro, the interface with the Epson printers is not what it used to be on the G4: no ColorSync, no 2-sided, no thick paper, none of those kinds of instructions appear on the generic printer control panel. Which by the way, bears NO resemblance to the Epson manual screenshots, and the instructions in the Epson manual are useless.
    How do you make a MacBook Pro talk to an Epson printer? And by the way, I cannot use the scanner either. I have to set up a document to print, then when the printing progress box appears, click on the scanner icon.
    Also
    Printer has 2 compartments. Top compartment #1 for all types paper.
    Bottom compartment #2 for plain paper only.
    I load glossy photo paper in #1, it prints plain paper from #2 even though I entered instructions on the control panel on the printer.

    If you haven't done so already, try resetting the printing system.
    Reset Printing System

  • How do i make a mirror image of a photo to print an iron-on transfer

    how do i make a mirror image of a photo to print an iron-on transfer?  I am using iPhoto 08 ver 7.1.5.
    Thanks

    You can't with iPhoto.
    You can with Preview or any image editor.
    Regards
    TD

  • How can I connect my iPad to an HP Photosmart c309n printer?

    How can I connect my iPad to an HP Photosmart c309n printer?

    You do not have an Airprint enabled printer.  See the attached link for the most current Airprint list.
    There are however, apps you can purchase, which will let you print via Wifi to your printer.  Check out either Printopia or Print Central in the App Store.  Both are about $9 and work well.
    http://support.apple.com/kb/ht4356

  • How do I get my PC to See my Photosmart 5515 Printer via my wireless network

    I have recently purchased a Photosmart 5515 (B111h) printer and have followed the setup instructions to the letter. The printer is now connected to the wireless network with an IP address of 192.168.0.4. However I am unable to find it on the network using the HP setup software.
    To test the connection I have set up eprinting and his works fine, so the printer must be connected to my route to be able to connect to the internet. I have run the printers wireless newtork test report and everything has come out "PASS"
    I have tried turning off my personal firewall (Norton Internet Security 2012), but this has made no difference.
    I have run the HP network diagnostics, this has not found the printer in (in the "HP printers found on your network" box) but does show it (in the newtwork devices list) as a device on the network with the IP address above and the name HPEC9A76C7CAB.
    I have also tried to brows the printers internal web page at the IP address but I get nothing, the page is in a constant state of update (No "page not found message", but no page either). Eventually (over 5 min) it stop trying to update, the page remains bland but a "HP" logo appears in the page tab.
    I have a samsung laser on the wireless network and this behaves perfectly and can easily be browsed.
    I also had a Kodak, which I removed to be replaced by the HP which also behaved perfectly for nearly 2 years.
    I am using a SKY router, which had been in use for several years now - without any problems.
    I have also tried connecting the printer via USB. This worked fine, but when I tried to use the setup software to change the USB connection to a wireless one, it identified the the printer was already connected to my wireless network, but again could not find it.
    I am pulling my hair out here (and i have not got much to spare) can anyone help me out with a solution?
    Thanks

    HI,
    I do not have a "Devices and Printers" option when I click on the start, The only thing I have close to that is the "Settings" then the "Printers" option but that behaves nothing like you describe from step 2 onewards.
    I did have a play with the printers though and tried to add a preinter manually. When I chose the option of the new printer to be wireless it found the printer and I was able to install a driver for it from the CD. So now I have the printer working..... BUT the HP 5510 family printer software still does not work, I still can not connect it to the printer and can not install the scanner.
    If I run HP home diagnostics It still can not find the printer on the network. However (now that I have installed the printer manually) the HP printer diagnostics finds the printer straight away and tells me there are no problems with it!!.
    This is a far from satifactory situation. I may have the printer working (not exactly sure how I managed this when the HP software still can not see it) but I have no scanner or access to the HP tools.
    Has anyone got any Idea what is going on or how to fix it?
    Cheer

  • How can I get a driver or installer for my wireless HP Photosmart C6350 printer

    My HP Photosmart C6350 printer was previously attached to my iMac wirelessly and worked fine.  But I can no longer get it to even recognize the printer.  The printer works well from my laptop operating on Windows 8.  Any ideas would be appreciated!

    Sure we be helpful if you told us the version of OS X, telling us it works with Windows 8 is of no value whatsoever.

  • Problem printing with HP Photosmart 7520 printer.  Same bad result independent of advanced settings.

    How can it be that, no matter what settings (advanced, custom, PS manages color, Printer manages color,...) I get the same terrible result for a reference photo (dull, colorless)?   It is as if the PS CS6 is not controlling anything with these settings.   Is there something else I need to set to make this work?  (Old HP Photosmart 7960 works fine, but they stopped manufacturing new photo cartridges).  The 7520 all-in-one makes copies of graphics with excellent, accurate color rendition so it is something with the settings for the printer.  The device can print good color.   HP support  says its Photoshop settings.  I don't know what it is.
    Thanks for your help.
    -Jeff

    Hi Pirazok,
    Welcome to the HP Forums.
    I am going to give you a document that deals with when the Printer Does Not Maintain Wireless Connection.  This document covers a wide span of troubleshooting steps that I think may help with the issue you seem to be having.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Error 880b5f68 keeps appearing when trying to print on my photosmart 325 printer.

    Each time i try to print error 880b5f68 appears.  Product support says it will shutdown and reset, this is not the case, when it restarts the same happens again.  Anyone know how to get round this error so i can use my printer again?

    Hi sskcasto,
    Here are some solutions:
    http://fix-your-printer.blogspot.com/2011/01/solvi​ng-error-code-oxc19a0036-on-hp.html
    Good luck !

  • How can I make a photograph large enough for large format printing?

    Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
    I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
    I am aware of rasterize and vectors, but please  could you explain how they work, and if that is my solution.
    I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
    This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me

    Let e try to explain briefly...
    "Is there a way to make an image larger on photoshop or illustrator? I will be printing on a large format latex printer. So the printer itself is excellent but its the image that i am struggling to acquire.
    - The actual resolution necessary to print grand format depends on the printer.  Most of the large-to-grand format inkjets print at 600dpi.  Photoshop is the better application for sizig images, while Illustrator is the better application for sizing graphics ( ie., logos ) and type.  Use Illustrator to layout both the images and the graphics.  You typically would send the print vendor an appropriate PDF file ( that can be scaled ).
    I have basic knowledge of the programmes but if you could explain it to me i could figure it out.....
    I am aware of rasterize and vectors, but please  could you explain how they work, and if that is my solution.
    I want to keep the original photograph as realistic as possible (would prefer not to have it traced on illustrator) and from research it says simply increasing the image size amount of pixels on photoshop does not help...perhaps it does, if you know please help!
    - You most certainly can use photographs in large format.  The problem is you will have to setup the file scaled down.  In some cases, the output will have to be assembled in sections.  Let's take a section of 10 feet high x 36 feet long.  You'd setup your Illustrator file 2.5 feet high x 9 feet long ( 25% ) or 30 inch x 108 inch to be enlarged at the printer 400%.  Each time you enlarge an image 2x you cut its resolution in half.  So, an image starting at 300ppi will end up at 75ppi.  So, your image file would need to be 300ppi at 25%. 75ppi sounds low, right?  In actuality, it is enough to print grand format and the image appears smooth. Now the question becomes, how do I get an image large enough in Photoshop?  Remember, you'll need a 30" x 108" image plus bleed at 300ppi ( Placed in Illustrator at 100% ).  There are applications like Genuine Fractals or Image Doctor's "Blowup" which will enlarge an image file without degradation.  I use Genuine Fractals and the results are phenominal.
    This will be a print for an interior wall of an exhibition trailer, and we want to cover all the walls. Plus in future we will be printing for vehicle wraps so I need this knowledge! Help me "
    - It'll become easier as you do more of this type of work.  The amount you end up scaling is up to you.  There are limitations as to how big a document can be in Illustrator.  I like 25% because it is similar to working on a print ad that is high resolution.  Another thing to remember is set your raster effects to High in Illustrator.  They will be retained in the PDF which will be enlarged 400% and the ending raster effects will be 75ppi just like the image.  Also, feel free to contact the print vendor and ask them questions.  You could send them what I've written here and see if they agree.  Let me know if you have any further questions.

  • I'm brand new to Macs and Air. How do you make the onscreen text bigger overall. The print is super small?

    I am going blind trying to see the tiny text on this laptop. I'm sure there is a way to make it bigger overall.  Also need bigger text (to see as I type) on e-mails? What do I do?

    Overall ?
    Try a different resolution
    Open System Preferences > Displays > Display > Scaled
    For Mail. With Mail open, from the menu bar, click Mail > Preferences then select Fonts & Colors tab.
    Click Select to change the font and font size.
    Message was edited by: Carolyn Samit

  • TS4108 I have already changed my Apple ID and password online. How do I make my Iphone4s recognize this?

    Please help! haha. It keeps asking me to put the password in for my apple id on my phone but it still says my past apple id, so I know that's why it's not recognizing the new password either. On icould.com online everything is good though. I don't get it.

    Not sure where you want to change it, but to change it...
    For iMessage, go to Settings>Messages>Send & Receive, tap the ID sign out, sign back in using the new ID.
    For FaceTime, do the same thing in Settings>FaceTime.
    For Purchasing, do this in Settings>iTunes & App Stores.
    For iCloud, you'll have to delete the account, then sign back in with your updated credentials.  Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.  Note: deleting the account only deletes the account and any synced data from the phone, not from iCloud.  You data will be synced back to your phone when you sign back in and turn your data syncing back on (if prompted, choose Merge).

  • How do I connect my ipad2 with my hp photosmart c4780 printer?

    How do I connect my ipad2 with my HP photo smart C4780 printer?

    Sharon-
    I don't think that printer is capable of AirPrint.  If the printer has WiFi or can be connected to WiFi, you can use an iPad App like Print n Share.  If not, you can use a computer program like Printopia to share the printer as AirPrint over WiFi.
    Take a look at the free iPad App, HP iPrint Photo.  It has some limitations but should at least get you printing.
    Fred

  • I have perl scripts that I want to be able to run with my iplanet web server 6.0. How can I make it work in Windows NT? (Because I have no problem when I use it with Linux).

     

    Hi Melanie,
    In order to run a PERL script under Windows NT the iPlanet Web Server needs to know where to find the PERL interpreter.
    follow these steps :
    1) Make sure Windows NT knows what a .pl file is. In file Manager click on file and choose associate from the menu. Check the "files with extension" drop-down list for pl - if it exists verify that it is pathed to your perl.exe. If it is not already on the list click the "New Type" button. In the Filetype box put pl. Choose open from the Action drop-down list. In the Command box specify the full path to your perl.exe interpreter (Make sure to use short filenames, rather than long filenames.) Click the OK button. Then click the Close button in the main Associate dialog box. Double click a .pl file to test - it should automatically launch the PERL interpreter and feed it your .pl file.
    2) Create a directory to contain your .pl scripts.
    ~server_root\shell-cgi is a good choice.
    or \cgi-bin\
    NOTE: Make very sure that this directory is NOT part of the document root, it should have it's own directory (preferably at the same level of the docroot).
    3) In the Admin Server select Programs.
    4) Choose CGI directory (normally) or WinCGI directory or ShellCGI Directory depending on ur choice from the Programs menu.
    5) Put the URL Prefix you would like to map to your Shell-CGI directory into the URL Prefix field.
    6) Put the full path to your Shell-CGI directory in the Shell CGI directory field.
    7) Click OK.
    8) The save and apply changes page will display your changes and give you the opportunity to verify them. If they are correct click the Save and Apply button. If not Click the Undo button and go back to step 4.
    (9)You can then call your .pl scripts directly by referencing the directory mapping that you have just created. For example:
    http://my.server.whatever/shell-cgi/ myscript.pl
    this should work now.
    If not Pls Mail me.
    regards
    T.Raghulan
    [email protected]

  • How do I find out the ink levels in my OfficeJet 4500 printer and my Photosmart 5510 printer?

    I have Windows 8.1 and cannot find an easy way to see the ink levels on my printers.  Please help!  Thank you.

    Jan, welcome to the forum.
    Here is a guide that will help you with your problem.
    Also, here is the here is the Full Feature Software & Drivers for Win 8.1 and the printer.  If the above link doesn't help you, install the software & driver for the printer.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My Firefox currently in offline mode, cannot browse web. How do I make sure Firefox is permitted to access web??? Problem just started 2 days ago.

    When I log on my desktop mac, and sign in, a screen pops up which states: "'''''''''Firefox is currently in offline mode and cannot browse the web.'''''''''
    Make sure your computer or network is protected by a firewall or proxy, make sure Firefox is permitted to access web"??????
    I have to log completely out, Restart my computer, then it will let me get online or browse net.

    Did you check the Offline setting in File > Work Offline?

Maybe you are looking for