How do i make my movies in iItunes go under Tv shows

How do i make my movies in iItunes go under Tv shows im lost.....

File>Get Info?Options>Media Kind

Similar Messages

How do I make multiple movies look like one?

I created a demo of 136 slides with mostly screencaps and one
small flash animation. The final published flash file is
approximately 30MB. When the demo is run on multiple computers, the
CPU utilization rises up to almost 100%, this makes the demo run
very slowly on most computers. I was advised to cut my captivate
movie in half ( in slides)... however even then the CPU utilization
is quite high. How can I break my demo into multiple linked movies
(to bring down the file size) but still have it play smoothly
without it stopping to load after each new movie? How do I make
multiple movies look like one?
Thank you.

Would it work to make the navigation of the page go to the
next movie?

How do I make quicktime movies Fullscreen in iWeb?

How do I make quicktime movies Fullscreen in iWeb? Can anyone help me please?

You have to create a QTL file that opens the QT movie in the player. Based on the settings it opens in Full Screen.
You may want to read this:
[QuitTime Tutorials and more|http://www.apple.com/quicktime>
[Launching QuickTime Player from a Text Link |http://developer.apple.com/documentation/QuickTime/QT4WebPage/samplechap/speci al-11.html]
An alternative is to publish your movies to Vimeo and embed the movie in your page. These movies can play full screen.
Or use DivX of Flash Video.
Samples here: http://web.mac.com/wyodor/iFrame/

How can I make my movies pro for mac work?

How can I make my movies pro for mac work?
I have downloaded it i click on the icon but I cant make it work

Delete the app using this free utlity > Download AppCleaner for Mac
Then re download the app using the same Apple ID it was originally purchased from. You won't be charged again.
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
If you still have problems, I located the app developer's website. Contact details for help here > http://www.mymovies.dk/about.aspx

How do you make a movie clip face the mouse

How to you make a movie clip rotate so it's always facing the
mouse?

thanks a lot! I got the code to work, I just modified it a
bit.

How do i make two movies from one clip?

i have imported a clip from my camera.
i want to make two movies. one is pretty much the entire clip, but one is only a portion of it. how do i retain the integrity of the complete clip while making edits?

you should copy the clip (edit>copy) from the project that has the clip as its whole, save and close that project, then make the new one that needs to be only a portion of your clip, paste the clip (edit>paste), and edit it. this is either the answer to your questoin, or i dont understand your questoin.

How Can I make a movie on my iweb begin playing before it is fully loaded?

OK, Forgive me in advance. I am a new "Mac Man". 5 days and counting. I just published a web site using iWeb 09. I have a 12 meg movie on the page. The movie doesn't begin playing until it fully loads (takes about 60 seconds). How can I make the video play as the rest of it loads. (like it does on Youtube)?
Thanks in advance,
Greg

tip for a new mac man. the inspector is your friend.

After I edit my movie on cut pro how do I make a movie DVd

I am planning to buy iMac for video editing with final cut pro & after editing on what software do i make a movie Dvd, & how good is the Final cut pro for professional movie editing

The software is very nice for pro movie editing ... as long as you do not have to bring in older Final Cut Studio projects. It cannot work with the previous version project files. In all other aspects, for doing very nice pro level work, it is very nice. It is actually very easy to make DVDs with the software. You do not need other software and everything can be done from within Final Cut Pro X on the Share menu ... the DVD option. It's a very good pro level package for not a lot of money. Furthermore, the way it works is the future of video editing. It would be good to learn it if you plan to be in video production for a while. Best wishes.
stephen

How do I make all of the images of the icons show in Safari Favorites?

I am running the Yosemite Safari and when I click the Favorites bar some of the links don't have the images (look at attached photo). How can I make the image for the website appear?
See how the Gmail, Youtube, Google, Google News all don't have icons? Thank you for your help!

Try emptying caches.
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
   Library > Caches > com.apple.Safari > Caches.db
   Right click the Caches.db file and select "Move To Trash.
   Close windows and relaunch Safari.

How do i make flash movies?

yes im new to flash, and i dont know how to make like,
animated movies and such

In Flash there are many tutorials and samples as well as the
help files.
Start there.
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"brandon14" <[email protected]> wrote in
message
news:el512v$qjg$[email protected]..
> yes im new to flash, and i dont know how to make like,
animated movies and
> such

How do you make the movie icons smaller in the new iTunes?

I recently updated my iTunes to the lastest version (11.0). In the previous version I could adjust the movie icon sizes to make the icon larger or smaller. I can't easily figure out how to do that anymore. Does anyone know if it is possible to adjust the movie icons in the new iTunes?

If there is an option for adjusting the size of the movie icons, I haven't been able to find it.
Regards.

How Can I Make Smooth Moves of Still Images?

I'm doing a lot of moving stills in a current project, but I can't figure out how to add acceleration curves to the moves. I know the pen tool has a "smooth point" to add curves to keyframes, but I don't know where to apply them. I can apply them in the "scale" setting in the viewer, but not "center."
I'm sure there's an easy way, but I can't figure it out. Id prefer to do it in the canvas if possible. I want to reposition, slide, and zoom my photos so they don't "clunk" on the keyframes.

In the Canvas, make sure you're in Image + Wireframe mode.
Set up the basic move:
- position the layer at one end of the motion
- set one keyframe on Center
- move the playhead to the other end of the intended motion and move the layer again.
Right-click on the closing keyframe and choose Linear. Look really closely at the motion path (a series of small purple squares) in the Canvas. Connected to the currently selected keyframe (green square) are two circles, one dark purple and one light purple.
The lighter circle controls the curve of the motion. Adjusting this will change the path the object moves along.
The darker circle controls the acceleration. You'll see the smaller purple squares bunch up or spread out as you drag the darker purple circle; the further away the squares are from one another, the faster the motion.
Since you want to keep the path the same but change the acceleration, just move the darker circles. Ease In/Ease Out will start the process for you but with less control.
If all that doesn't give you the results you're looking for, consider using Motion or iPhoto instead. Some third-party plug-ins can also help if you're doing this a lot.

How do I make a movie wait for a FLV cuepoint

I'm trying to synch a "talking head" FLV with some graphics,
so I simply want to get my movie to wait for a cuepoint to begin
playing again. I'm making it Flash 7 compatible, so I'm using the
older Media Display component.
Is there a "stop" and "wait for cuepoint" that would work? If
someone could give me the actionscript I should paste in the frame,
it would be greatly appreciated, since I don't really know
actionscript that well. Thanks.

I'm sensing that you don't know much actionscript. If you
want to do much that is really fun and cool you will need to learn
some.
Start with the help files. Everytime you use a new component
or class go to the Actionscript Language Reference or the Component
Dictionary. Don't try searching it will generally only confuse you
more.
This next bit is going to sound silly, but the differences
are subtle and please take it in the manner it is offered.
When you say you'd like to pause at a certain frame you mean
a movieclip that you have, right?
If you check all the information about the FLVs and the Media
component you will find there is absolutely nothing that allows it
to make a movieclip pause or play. But if you check the MovieClip
class you will find there are the MovieClip.stop() and the
MovieClip.play() methods. These are the only ways to get a
movieclip to pause/stop and or play. There are no others.
So you have most of the answer there in your second post. It
is just worded a bit off.
You need a movie to pause (for which you will use the
MovieClip.stop() method) and when a cuepoint happens you will need
to start the movie using MovieClip.play();
If you check the MediaDisplay component directory there will
be sample code for how to listen for a cuepoint. I'm still using
Flash 7 so my help files are organized a bit differently, but what
you are looking for is under Media.cuePoint.
Notice the code at the bottom of the entry – READ the
whole entry, even if you don't understand it all now, read it,
outloud if it helps. You will need to have an instance of the
playback component on the stage (in this example it is called
myPlayback, but you could call it whatever you wanted, just make
sure that both names are the same.
I recommend trying this outside of your current project. Set
up a simple new document, put an instance of the playback component
on the stage, give it an instance name, assign an FLV to it, give
it a cuepoint or two, and then add the listener code, just as it
is. See how it works? Do you get the trace statements?
Then you can develop it a little further. Add some named
movieclip to your stage. Add a line myClip.stop(); Also notice that
you can give your cuepoints names? Put a few in and call some start
and some stop (or whatever you want.) Then instead of a trace in
the cuepoint listener have something that says, "If the cuepoint is
called start I should tell the movieclip to play and if the
cuepoint is called stop I should tell the movieclip to stop/pause."
I could easily write all this code out for you, but what
would be the fun of that for you? Give it your best shot and post
back as you accomplish things.

How do I make my movies download faster??

Is there a way that I can convert my movie clips on iWeb so that I can make it faster to download for people who go to my site??
Thanks alot!
Maxfield Fey

Lots of tips in my PDF book QuickTime Pro: Explained about this same issue.
Our iMovie Projects may have more than one destination and a DVD or CD version isn't practical for Web based files.
The "canned" presets offered do not allow the flexibility or options you may want to use on your file.
"Expert Settings" may look like the Greek language to many users. So many different codecs (what's that) and options that your head would spin.
Top this off with the page code (html and .js files) that is made by iWeb and you're going to have a migraine just fussing with all of it.
Smaller file sizes is your first goal. Reduce the dimensions, cut the frame and data rate and compress your audio track as much as you can stand. Your Web "viewers" will not notice most of these changes.
Web viewers have the attention span of a 3 year old. Cater to them with well made, fast loading small file sized movies.
**Noted by the terms of use, I may receive financial compensation from the link above**
Doubtful, as I'm eating beans and rice instead of filet mignon.

How do I make simple movies for my website?

I would like simple movies to start playing when navigating between pages on my website. For example, I would like 3-4 movies to start playing simultaneously as thumbnails and clicking on the thumbnail would start the movie selected.
Is this possible?
Thanks

In general I say you can do anything you can think of with Flash, within the limits of the program, and your idea seems feasible. But the details of how you go about doing it are to broad to offer anything except to say to try getting it going and when you run into a problem making it work, post again with specifics of what you've tried and what is failing.

How do i make my movies in iItunes go under Tv shows

Similar Messages

Maybe you are looking for