How do i make my notebook wireless

I tried to use a wireless router and they said there is a button on my Notebook that I have to slide over to go to wirelss, but I can't find it.

The current Airport express card is actually PART of the wireless upgrade kit available for the first generation of Mac minis that did not have wifi as standard, but on its own it is certainly no good.
The complete kit contains the AE card, a small adapter card to which the AE card fits and which then connects into the logic board, and the Airport antenna itself which clips to the top of the internal structure. The kit can be obtained from a number of sources, but officially it's only available through Apple service providers who are required to fit it. However, it can also be obtained from places such as http://www.mac-pro.com/s.nl/it.A/id.1501/.f?sc=2&category=22 and a reasonably careful owner can fit it themselves or take it to an Apple approved service provider who will do the work (for a fee of course).
As an alternative, you might try one of the small number of USB wifi 'dongles' around, but even those known to be mac compatible often provide very poor and variable results.
The official kit is, in my view, the way to go.

Similar Messages

  • I dont think my g4 has no wireless wifi.  How do I make it have wireless wifi?  It operates on Mac OX 10.4.11

    I dont think my g4 has no wireless wifi.  How do I make it have wireless wifi?  It operates on Mac OX 10.4.11

    Hi, 2 ways...
    USB Wifi adapter, but tough to find one that has Mac 10.4 drivers.
    There are many Ethernet->Wifi adapters, here's one...
    http://www.walmart.com/ip/IOGEAR-Universal-Wi-Fi-N-Adapter-Multi-Language/326946 59

  • How do I make my Emac wireless?

    Is there a way to install a wireless card in a Emac?

    If you have an older eMac, it would need the original airport card; these are rather scarce and are hence rather expensive. They are also 802.11B only which might limit your ability to connect to a wireless network and will limit your speed.
    Another alternative (this is how I do it on my 700MHz eMac) is an ethernet wireless bridge adapter. These connect to your ethernet port and make it wireless. They require no drivers and are therefore platform and OS independent, although they are a little bit more difficult to set up. Expect to pay anywhere from $50 to $75 for one. I use a DLink DWL-G820.

  • How can I make my laptop wireless internet go faster?

    my laptop's wireless internet I want to make it go faster and how can I find out what the internet speed is?

    Contact your dsl provider to speed it up, heres to check your current speed, http://www.speakeasy.net/speedtest/

  • How do i make my own wireless connection the default

    Everytime my mb goes to sleep mode and then wakes up it reconnects to one of the other wireless networks in range instead of my own. Is there a way to make it to were my connection is the default?
    Also is there a way to make it to where the macbook doesn't sleep or anything when i close the lid, so that i can keep downloading or whatever but have the lid closed?

    Try this: Go to Apple Menu > System Preferences > Network. Click on the advanced button. In the list of preferred networks, drag your network to the top of the list if it isn't there already.
    You can keep your Macbook from going to sleep by adjusting the Energy Saver settings: Go to Apple Menu > System Preferences > Energy Saver. At the top of the pane, select either Battery or Power Adapter settings. Underneath "Put the computer to sleep when it is inactive for:" there is a slider; slide the blue dot all the way right to "Never."

  • How can I make my interntet wireless while keeping my desktop connected?

    I just got my Macbook Pro and I love it! One problem... I got airport extreme with it and I don't know how I can keep my PC desktop connected to the internet (no wireless) while having my Macbook wireless? Everyone at the Apple store just said to plug my computer in to the airport express.... What plug? I have broadband and am using an ethernet cable.... PLEASE HELP! THanks!
    MacBook Pro   Mac OS X (10.4.8)  

    I do have airport extreme ^^. When i plug the ethernet from the computer to the aiport base it doesnt work because its not connect to the broadband... how can i fix this?
    Apple's AirPort terminology can be a bit confusing as Apple uses the term AirPort Extreme for both their wireless cards and base stations. If you take a look at the following reference, you can confirm which AirPort you actually have. (ref: http://docs.info.apple.com/article.html?artnum=107908) If your AirPort Base Station has only one Ethernet port AND it's not shaped like a "flying saucer," then most likely, it is the AirPort Express Base Station (AX).

  • How do I make my printer wireless

    I have a HP Photosmart C4680 and I am needing to set it up as a wireless printer instead of having to keep it pluged into my lap top. Can you Please help. I already have wireless high speed internet.

    Your printer has a USB interface only.  You can plug that USB into a wireless router that supports USB printers or buy a wireless print server, but most of these only support printing, not scanning.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do I make my G4 wireless

    I have a imac PowerPC G4 (flat screen) bought in 2002. I am currently connected to the internet using a hard wire, however soon I am moving and would like to connect wirelessly. Can I do this? Do I need an airport card? and if so which one? If anyone can help I would be very grateful.

    Yes, I can say with certainty that the USB wireless device I linked to comes with appropriate Mac OS X drivers and it does work under Tiger. Not fast, but it works. And it's a cheap solution if that counts.
    A more expensive solution, in addition to the Airport card (if you can find one), is something called a wireless bridge. It communicates wirelessly with your wireless router and then connects via ethernet to your Mac. The advantage is that it does not require any additional software to be run on your Mac and it connects via the relatively fast ethernet connection. The disadvantage is that they are more expensive and require a bulkier extra device sitting next to your Mac. I don't have any links but they are out there. I considered one but balked at the cost.
    Regards,
    Steve M.

  • How do I make my MacMini wireless?

    I have an original (first-generation) MacMini, and I would like to enable it for wireless web. The people at the Mac store tell me that the current Airport Express card is NOT for use with my computer. What card do I need, and where can I get it? Thanks!

    The current Airport express card is actually PART of the wireless upgrade kit available for the first generation of Mac minis that did not have wifi as standard, but on its own it is certainly no good.
    The complete kit contains the AE card, a small adapter card to which the AE card fits and which then connects into the logic board, and the Airport antenna itself which clips to the top of the internal structure. The kit can be obtained from a number of sources, but officially it's only available through Apple service providers who are required to fit it. However, it can also be obtained from places such as http://www.mac-pro.com/s.nl/it.A/id.1501/.f?sc=2&category=22 and a reasonably careful owner can fit it themselves or take it to an Apple approved service provider who will do the work (for a fee of course).
    As an alternative, you might try one of the small number of USB wifi 'dongles' around, but even those known to be mac compatible often provide very poor and variable results.
    The official kit is, in my view, the way to go.

  • How Do I Make My EMac Wireless Ready?

    I need to get an Airport or Airport Extreme card, correct? Which one will fit into my computer? I've got a large desktop emac that is about 3 years old. It's a PowerPC G4 (3.3), 1GHz processor, ATI graphics, 640 SDRAM.... I'm not sure if any of this info is helpful so let me know if you need more to help me out!
    Thanks.
    emac   Mac OS X (10.3.9)  

    Hi lovelycrimsonred, Welcome to the boards!
    According to the document at http://docs.info.apple.com/article.html?artnum=107440 , your computer needs an Airport Extreme card. These are available from Apple.com/store, or cheaply secondhand through ebay.com.
    Installation details may be found in your computer's manual, which is also available online at http://manuals.info.apple.com/en/eMac_OriginalUserGuide.pdf (page 40+)
    Enjoy!

  • How do i make my hp laser jet p1102w printer wireless using bright house modem

    How do I make my printer wireless without having to hook the computer to the printer.  I have the Bright house moden and internet services.

    Hi,
    The printer supports wireless connection. Please use information from the following link to set it up:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02847467
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I make sure wireless bridge is on *my* wifi network?!?

    Suppose I have a wireless bridge from Linksys, which lets my network disk be on my home wifi network. It's set up to grab an address via DHCP. But, I'm thinking - my neighbor also has a wifi network. How do I make sure the disk is talking to my Linksyst router, not to others that may be in the vicinity? The router has a MAC address filter, and that's great but it's the wrong direction: how do I make sure my wireless devices aren't talking to other people's wifi routers?
    Mike

    To prevent your wireless devices from accidently connecting to a neighbor's system, you must set up wireless security.
    You will need to enter the following information in both your wireless router and your wireless devices:
    1)  a unique SSID - this identifies your network
    2)  your chosen method of encryption
    3)  your encryption key
    You should be able to set your "network disk" (or the bridge that it is using) to only connect to the wireless system that matches 1, 2, and 3 above.
    For more on wireless security, see my previous post at:
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=9141&query.id=8...

  • HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

    I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

    Well, you could install the drivers to the wireless printer in you other computers.
    blue apple > System Preferences... > sharing
    check printer sharing.

  • How do I make my HP photosmart D1110 Printer wireless for when I print?

    How do I make my HP photosmart D1110 Printer wireless for when I print? I mean I dont want to plug my printer up every time I need to print something. I know i can do this with my printer because my uncle had it hooked up this way before he passed away. Now im trying to hook it up again and I cant figure it out.

    KristiGilreath wrote:
    I tried following the steps but I didn't havesome of the tabs it was talking about. I just dont understand.
    Hi,
    Which type of connection you want to use ? Which tabs are you talking about ? I could not find full specs of your printer, how old is it ? Do you use a wireless network at home ? As mentioned above, I don't know your existing hardware therefore you need to check the book and select a suitable connection first.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I make my HP PhotoSmart 3210 printer wireless Network

    How do I make my HP PhotoSmart 3210  printer wireless. It has an Ethernet port which works fine but I want to print on my current wireless network. Can you use any wireless router of G or N? What else can I use? I'm looking for the cheapest option. Also, It has bluetooth, can I use any USB bluetooth for that to work.? I would rather use my network but if all else fails bluetooth will have to due
    I am currently runnning windows 7 if it matter. But, I don't think it does.

    Hi,
    Buy a new wireless printer could be much cheaper and no headache. Or you can try something like this:
        https://www.google.com.au/search?q=usb+wireless+print+server&hl=en&tbo=u&rlz=1G1GGLQ_ENAU282&source=...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Channels and busses randomly re-routed in Logic 9?

    Is this happening to any one but me?  It's kind of difficult to artculate but here goes.  Scenario:  I have several Logic sessions (projects started a while back) that all have similar random issues.  The projects were started as new blank or from a

  • Virtual pc 7

    what are your thoughts on this product as I have always been a windows guy but after my laptop crashed my wife gave me her ibookg4 as she has the mac book pro. She has always been true to apple! I have to say I am getting hooked but I am so used to w

  • Bouncing mail

    I want to set up a rule that will automatically bounce (and then delete) mail from one specific person. This is a known person, not a spammer. However, his mails are bugging the heck out of me and I want him to KNOW that his mail is being bounced. Ca

  • Cant open Games in Nokia N85

    Hi! I cant open the Games meny in my Nokia N85. Does anyone knows why? How do I reach the preinstalled games?

  • ICloud Storage since 8.1 is now almost full

    So prior to the recent change, I had if I remember correctly, 15Gb of cloud storage to back up my iPad and my iPhone.  And then the iCloud was automatically upgraded to 20Gb, a nice good thing, but remember my storage was ok on 15Gb, and yes I have u