How do I make my printer wireless

I have a HP Photosmart C4680 and I am needing to set it up as a wireless printer instead of having to keep it pluged into my lap top. Can you Please help. I already have wireless high speed internet.

Your printer has a USB interface only.  You can plug that USB into a wireless router that supports USB printers or buy a wireless print server, but most of these only support printing, not scanning.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • How do i make my printer be wireless

    how do i make my printer be wireless

    Get an Airport Express to plug in near the printer. Connect an Ethernet or USB cable from the printer to the Airport Expres. Use Airport Utility to configure the AEX to Join an Existing Network.

  • HT3500 how do i make my printer connect to a new SSID

    I have a new wireless address, and my printer's setting is the old wireless SSID. so my printer is not connected....  how do i make the printer to connect my new SSID??

    You have a printer question, not an AirPort question. No adjustments need to be made on the AirPort if wireless is working for other devices.
    Check the documentation that came with your printer to see how to reset the device back to the original default settings it was using when it was new.
    Then, configure the printer to connect to the "new" network....just like you did when you configured it to connect to the "old" network.
    If you need more info, you need to contact support at the printer manufacturer.

  • I dont think my g4 has no wireless wifi.  How do I make it have wireless wifi?  It operates on Mac OX 10.4.11

    I dont think my g4 has no wireless wifi.  How do I make it have wireless wifi?  It operates on Mac OX 10.4.11

    Hi, 2 ways...
    USB Wifi adapter, but tough to find one that has Mac 10.4 drivers.
    There are many Ethernet->Wifi adapters, here's one...
    http://www.walmart.com/ip/IOGEAR-Universal-Wi-Fi-N-Adapter-Multi-Language/326946 59

  • How can I make  a "print screen" on my iMac?

    How can I make a Print Screen of my iMac? Also catching only a portion of the video?

    Hello redlion53,
    It sounds like you would like to take screenshots of either the entire screen or a portion of the screen. This article outlines how to perform this function:
    OS X: Taking pictures of your screen
    http://support.apple.com/kb/ht5775
    Take a picture of your entire screen
    Press Command (⌘)-Shift-3. The screen shot is added to your desktop.
    Take a picture of some of your screen
    Press Command (⌘)-Shift-4, and then drag the crosshair pointer to select the area. Hold Shift, Option, or the Space bar while you drag to resize the selection area. To cancel, press Escape (esc) before you release the mouse button.
    Take a picture of a specific window
    Press Command (⌘)-Shift-4, press the Space bar, move the camera pointer over the window to highlight it, and then click.
    This works with open Finder windows and most application windows.
    To cancel, press Escape (esc) before you click.
    Take a picture of a menu
    Click the menu to reveal its contents, then press Command (⌘)-Shift-4 and drag the crosshair pointer over the area.
    To take a picture of the menu without the title, hover over the menu, press Command (⌘)-Shift-4 and the Space bar.
    To cancel, press Escape (esc) before you click.
    Additional Information
    In Mac OS X v10.6 and later, the screenshots are saved as PNG files on the desktop. They are automatically named "Screen shot (date and time).png".
    You can also take pictures of the screen using the Grab app.
    Some apps, such as DVD Player, may not let you take pictures of their windows.
    To capture a partial screen or a window selection to the Clipboard instead of a desktop file, use Command-Shift-Control-4.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How can I make my printer airprint compatible so I can print from my iPad air?

    How can I make my printer airprint compatible so I can print from my iPad air?

    If you have a Mac, you can usually install an application like Printopia to allow the iPad to print to your printer.
    There is a free trial, so you will know if Printopia works for you before you buy. Details here:
    Printopia - Ecamm Network
    There are other apps that do the same things, but I have not tried them, so cannot comment on them.

  • How can I make my print job go fast again?

    How can I make my print job go fast again? Since february when there was a update for snow leopard, all of my print jobs almost take forever to finish.. a pdf file 10MB size will take about 1 hour to send to the printer that is a Nashuatech mp c3500.
    And yes, if the pdf for example is 20MB size, it will take about 2 hours to get it done..
    My equipment is:
    Macbook pro OS X 10.6.8
    Nashuatech NRG MPC3500

    Sometimes, Software Update doesn't apply updates entirely correctly, and odd issues can happen.
    You might download and install the latest combo update for 10.6.8, which is at http://support.apple.com/kb/DL1399 . Before installing, bring up Disk Utlity (on your hard drive in applications/utilties) and repair permissions. Install the update, then repair permissions again when done.

  • How do I make a printing pre set in Photoshop CS4?

    I use Photoshop CS4 and print on an Epson R360.  I often print high resolution images, usually jpeg, onto quality Epson paper with certain settings to get the best result.  However I am aware that I can set a "pre set" to achieve this without having to make the print spec choices each time but don't know how to do it.  I have checked the Adobe website but cannot find any relevant info that I can understand.  Can anyone give me a simple guide how to do this please?

    In the PRINT dialog box, [see Pic-1], make all the changes that you want,
    then [see Pic-2]
    SAVES US, name your preset.  When you print again, then you just select that PRESET, and all your print specs for the PRESET should all be there.  I hope this helps.
    Arnel
    www.arnelgarcia.com

  • How do you make it print first page first and not the last page first?

    I have a HP Officejet Pro 8600. How do I make the first page print first and not the last page printing first?

    Hi,
    From the application used to print open the print dialog and click Oroperties or Preferences to access the Printing Preferences screen.
    From the Layout tab set Page Order as Back to Front, then the first page will be printed first.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I make the print in yahoo and comcast e-mail much larger--it is so small it is unreadable

    The print in my e-mails at Yahoo and Comcast is so small that it is unreadable. I need to know how to make the print larger. There must be some way to do it. It wasn't always like this.

    Use the scroll down /up wheel on your mouse while pressing the ctrl key. That worked for me.

  • How can i make my printer respond faster to the print comand?

    I have an hp officejet 6500A.   It is very slow in responding to the print command.  How can I make it take less time then 30 seconds to a minute to respond?

    OK, restart your router.   Actually if your adsl2z is a bridge, what is the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT1150 My question on printing is how do you make the print larger than it actually is on paper or is that possible?  I know you can enlarge print on the screen, that is easy, but once it prints it's always to small.  How can I make it bigger or is that p

    my question is on printing.  i know that you can make the print larger on the screen by adjusting it, but then when it comes out on paper it's just as small again.  how do I set my actual printer or my iMac to print the actual paper print larger? 

    Hello, it depends what App & Document type, some say PDFs have the font stuck at a certain sise, but say in Text Edit, open a document, Highlight some text the CMD+a to Select All, then type CMD+t to get the Font/Text size menu, select a bigger size.

  • How can i make my printer BT enabled?

    Hi,
    i have a powerbook with BT, and i thought it would be nice to connect between my pb and my printer (canon i960) wirelessly. so, i bought an Iogear print adapter for bluetooth (GBP301) hoping that it would make my printer BT enabled. i plugged the adapter to my printer and i tried to set it up using the BT setup assistant>select device type>Printer, but it has some problem. the setup assistant can find the printer, although when i tried to select the printer, it says "driver not installed", and doesn't let me go any further. the driver for this printer, however, is already installed in my pb, so when i connect the printer directly to my pb using a usb cable, i can print. Can anyone help me with this problem? thanks!!!

    As a general rule, 'universal' WiFi and Bluetooth printer adapters do not seem to work well with Mac OS X and printers.
    I suspect it is all OSs, not just OS X. I have a PowerBook, an evil Windows laptop, and a second even more evil Windows laptop from work.
    We have both a HP 7410 and a Canon Pixima, both of which claim to support Bluetooth.
    I foolishly bought two generic USB-Bluetooth adaptors, and my PowerBook has built-in Bluetooth.
    So far I have been unable to get either printer to work with any of the computers. I studied the HP 7410 manual extensively and concluded that they have instructions for connecting the printer to a cell phone or a camera via bluetooth, but the concept of connecting the printer to a computer is not discussed.
    Thge HP 7410 does show up in the PowerBook's list of available devices, so I know it is there and communication has been established. So far there does not appear to be a suitable driver available for either the HP or the Canon.
    Being a complete tightwad, I am not about to spend the exhorbitant amounts HP or Canon wants for their Bluetooth adaptors. I suspect that even if I did buy the adaptors, the lack of a suitable driver would still make it not work.

  • HT204406 How can I make a printed copy of my playlist?

    I used to be able to make a printed copy of my playlist but can no longer do it now.

    Ok I have googled, I have found a windows cleaning company in Switzerland http://www.windowsexpress.org/About-Us.htmland something called Parallels Desktop for Mac with instructions for installing windows on a mac.
    So I think we need to go back to the beginning with "What is Windows express?"
    Email programs as a general rule do not "export" their contents into another mail clients formats. The normal procedure is to "import" the foreign format so there are some obvious questions
    What formats can this mail software import?
    Are your existing mail accounts IMAP or pop?
    you can export email addresses from Thunderbird as CSV which almost all programs can read (including spreadsheets) From the address book select the Tools menu (Alt+ T) and select the export option

  • How can i make my printer print more than one page

    HP Officejet Pro 8600

    Need more info on what you're trying to do to help you...explain what you're trying to print and how you are trying to print it. 
    I am an HP employee.

Maybe you are looking for

  • Should I have concerns about the integrity of Best Buy's Mac sales?

      I bought my iMac OS X, Early 2008 Model from a Best Buy store. I was a naive & pensive 1st time [ever] PC buyer. The sales [kid] led me to an iMac that had been returned, and referred to it as an "open box sale." I was re-assured the Mac had been c

  • How do I make endnotes?

    Hello all, I found the below instructions for making endnotes, but have run into some trouble and would truly appreciate your guidance. Create an endnote Type the first endnote at the end of the document and assign it the paragraph format for endnote

  • Encoding: from *.pdf to *.html

    Oracle 9i I use rwservlet & *.rdf format if i put in url string "http//mysite........desformat=pdf............" - my reports - possible to read (means correct charset). if i put in url string "http//mysite........desformat=html..........." - reports

  • Problems with the App store

    I dislike how the app store works and I'm hoping you can take my suggestions and change it. I really dislike how buying an app works. It is too easy to buy stuff, and would be nice to have a verification before the final charge gets put through. Also

  • Connection Timing Out When Trying to Load Webpages

    I have a 15 inch mid-2012 Macbook Pro. Recently, I have been having some serious problems with my connections. It seems that on my main account only secure websites will load and all others will just time out. I have tried 4 different we browsers, bu