How do I make my USB/Airport Extreme disk show up in Disk Utility

I am running the most current version of OS X and a current generation Airport Extreme. I have an Epson Network Printer and a 2TB MyBook Studio hardwired to the Airport Extreme. I had thought that I could see the USB drive in Disk Utility, I need to format an old Time Machine partition, but now the drive is not showing up at al in Disk Utility. Any help would be greatly appreciated.
Rick

You know, that's what I ended up doing. I just really thought that I had been able to see it with DiskUtility. Must be getting old!
Thanks,
Rick

Similar Messages

How do I make my new Airport Extreme a base station?

I have been using an Airport Extreme (5th generation) as my base station router for a few years. I set the main network for my and my wife's use and created a guest network for when my sons visited and needed to use the wi-fi connection. I used passwords for both networks. Today I purchased a new 802.11 ac Airport Extreme. I unplugged the 5h gen. Extreme and plugged in the new Extreme. After a short hunt, my new 27" (late 2013) iMac found the new Extreme and had me set up a name and a password for it using Airport Utility. I was expecting it to ask if I wanted to set up a guest network, but it did not. I was expecting it to ask since I believe that is what happened when I installed my 5th gen Extreme a few years ago. For the 5th gen Extreme, I had to enter a password to protect settings on the Extreme, a WPA2 password for my main network and another password for my guest network. It took about 10 minutes to set up. For this new Airport Extreme I entered just one password. It took about 2 to 3 minutes for the entire setup. When I checked the menu in the Airport Utility under "Base Station", all lines are grayed out. Under the File Menu in Airport Utility, "Configure Other" is available, but "Import Configuration file" and "Export Configuration file" are also grayed out. I checked Network Settings in System Preferences and I see my new network name in the Wi-Fi menu and under the "Advanced..." button, I see the old and new Networks listed in the "Preferred networks" box.
So, how do I get the new Airport Extreme to act as the Base station and be able to enter a guest network? Does it require me to delete the old Network name from the Advanced... button page in System Preferences > Network Settings? Will I just have to start all over with the new Extreme to make it a base station?

Hello Leo,
I'm not at home so can't confirm but I can only assume that maybe some of the "old" settings in airport utility have changed, and simplified. Hence why you probably only need one password.
When I bought the new "tower" like AirPort Extreme, I just plugged it into the Ethernet, powered it on with the previous generation Extreme in place and in Airport Utility it just asked me if I wanted to copy the settings to the newer device, which included a few "port forwarding" settings. All done in this sequence. I didn't have guest network set up but you can still set up guest network under wireless in Airport Utility, hope this helps!

How do I set up an Airport Extreme as a router?

I need to make sure my Airport Extreme is set up as a router and NOT a bridge. I cannot find anything about this on Apple's manuals, the forums nor the interwebs in general. Has someone done this before?
Currently I have the Airport Extreme working as a WiFi seemelessly. I have two devices connected to the Airport Extreme via ethernet ports but only one is communicating. The other (a solar microconverter) is not communicating with the router. Cables work, I have unplugged and replugged everything, YES, everthing! Both devices have little green lights lit up next to the port they are plugged into.
Can anyone out there just tell me how I can either make sure it is set up as a router or how to change the Airport Extreme to work as a router.
I'm pretty desperate at this point.
TIA

In AirPort Utility 5.6:
In AirPort Utility 6 click on your device.
The device shouldn't be in bridge mode if you want it to act as a router.

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

How do i set up my airport extreme to access from my work windows based PC

How do I set up my airport extreme to access from my work windows based pc?

To mount the AirPort Disk in Windows 7 or Vista:
Open the Network browser by double-clicking Network on the Windows Desktop.
The AirPort Extreme base station name should appear in the browswer.
Double-click the name and you should get a login prompt.
Now depending on how you set up disk access:
In the Name field, either enter the user account name or for base station/disk access, leave this field blank.
In the Password field, enter the base station, disk, or user account password.
Select the volume(s) you want to mount, and then, click OK.

How do I set up my Airport Extreme to best use multiplayer games locally

How do I set up my Airport Extreme to best use multiplayer games with my family. Everyone is located in the same house and uses the same router.
I have tried a few games but have not successfully connected 2 players

That is a weird question, as your GAMES could be interpreted a hundred different ways. Are we talking about third party devices here or what?

How do i use a 2nd airport extreme both are newer models

how do i use a 2nd airport extreme both are newer models

I assume that you mean that you want to extend the range using wireless only.
This Apple Support Document will tell you exactly how to do that:
http://support.apple.com/kb/HT4259
The instructions assume that you have AirPort Utility 5.6 for Mac OS X Lion , so if you have not already done so, you will need to download and install this application to track the instructions in the support document.

How do I extend my existent airport extreme network by addition of a 2nd airport extreme?

How do I extend my existent Airport Extreme network by addition of a 2nd Airport Extreme?

Can you clarify which version of the AirPort Extreme that you have now along with the model that you plan to use as the second device?
The older "round" AirPort Exteme or the newer "square" version with rounded corners?
Are you planning to extend using wireless only.....or by connecting the AirPort Extremes using a wired Ethernet connection?

How can I access HDD on Airport Extreme with iPad

How can I access HDD on Airport Extreme with iPad

Without third-party software I don't think you can. An iPad has no user-accessible interface to a file system. Just what is it you're trying to do?

How do I install a new AirPort Extreme on a Windows network?

How do I install a new AirPort Extreme on a Windows network?

To configure a new 802.11ac Extreme requires AirPort Utility for iOS or AirPort Utility for OS X.
http://www.apple.com/airport-extreme/specs/

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

I am not able to print to my usb airport extreme attached printer from my windows aptop or window desktop

I am not able to print to my usb airport extreme attached printer from my windows aptop or window desktop

Your post did not really provide any details on what you have done in the way of troubleshooting or printer software that you have installed, so we don't have much to go on here.
For starters though, you will not be able to print unless you have installed Bonjour Print Services for Windows v2.0.2 on the PC(s) and run the program.
So, if you have not done this, that would be a good first step.

How many ip addresses will an airport extreme handle?

I have about 60 devices in my home that need an IP address and can only imagine with the Internet of Things, wearables, security etc. that it will go higher in the future.
How many IP addresses will an Airport Extreme or Time Capsule handle reliably?
Thanks -

About 250 total wireless and Ethernet addresses, with a limit of 50 for wireless devices........assuming that it is the AirPort Extreme or Time Capsule that is acting as the router handing out the IP addresses.

How do I make a bootable hard drive clone of my main disk in my mac pro?

Hi everyone,
How do I make a bootable hard drive clone of my main disk in my mac pro?
My main drive has bad sectors and I want to replace it.
Thanks in advance

Also your Mac's Disk Utility can make a bootable clone;
http://macs.about.com/od/backupsarchives/ss/diskbackup.htm
Consider though, if your internal HD is failing and defective, then any clone however made, may carry that defect.
Perhaps it would be better to copy your personal data, photos emails etc, to an external drive as well, just in case the clone did not work because of the failing hard drive.

How do I make a DVD of my slide show

Made a slide show, exported it to iTunes where it now resides in "home movies" as a video. How can I make a DVD of my slide show?

If you right click on the movie in iTunes and choose "Show in Finder" you can then drag and drop the movie into the theme of your choice in iDVD. More information on iDVD here: http://www.apple.com/support/idvd/

How do I make my USB/Airport Extreme disk show up in Disk Utility

Similar Messages

Maybe you are looking for