How do I make PDFs OPEN and fit my screen?

Every time I open a PDF, the document opens larger than my screen. How do I make the document fit the screen I have?
This is absolutely NOT a zoom problem.
I have a 15 inch laptop. It has a screen that is about 12 inches wide x 7.5 inches high.
I open a PDF, and the document opens on my screen so that the entire document is more like 13 inches wide, and 10 inches high. The top menu bar, where I would grab to move, change zoom, enlarge, or, for that matter, CLOSE the document is like 2-2.5 inches OFF the TOP of my screen.
I can change zoom - it only changes the size of the contents in the window, never the actual window size, and the problem is the window size.
So the question is, why does PDF even open a window larger than my screen supports, and how do I stop it.
This is not new - this should by now be a known serious flaw with Adobe Reader and Acrobat and regularly happens with PDFs, and has for years. If I have a second monitor, I can drag the side of the window over onto my second monitor, and then shrink it. But, if I am traveling, so without my second monitor, it effectively means the only thing I can do with any PDF is right click on the bottom menu bar and "Close all windows"
Windows XP, Windows 7, Windows 8.

Try clicking the arrows top right corner of your Safari window or Control + Command + F on your keyboard.

Similar Messages

How do I make safari menu bar fit my screen

I'm a new Mac user on a MacBook Pro with OS Lion and Safari 5.1. Something has happened so that my windows do not fit the screen (too large) anymore. I have to manually size them everytime I open a new window or program. Additionally the menu title bar across the top of the screen is too long and I have to scroll to see either end. I've gone to preferences and tried to scale it back to where it used to be using the monitor settings but no luck there. I've looked for something similar to Windows restore to get my screen back to where it was before. Any ideas what happened and how I can get my title bar to fit across the top without having to scroll.

Try clicking the arrows top right corner of your Safari window or Control + Command + F on your keyboard.

How do you make programs open and close into their own tab in the dock, like they do in windows?

You know in Windows, how there is a tab for each program in the taskbar? And, if the program is minimized, when you click the tab, the programs restores. And when you click the tab again, the program minimizes.
Can this be done on Mac?
Thanks!
Bret

Here's my ungrateful response...
I should have posted screen shots in the first place!
Here is what I'm talking about. In the first screen shot (in Windows), you can see that there are programs running in the taskbar, but all the windows are minimized. The mouse is hovering over the "Computer" tab in the tasbar at the bottom of the screen. I am about to click the left mouse button once to restore the "Computer" window onto the desktop, but I haven't clicked it yet...
In this next screen shot, you can see that I have just clicked the left mouse button once and the "Computer" window has been restored (is now showing on the screen)...
Then, WITHOUT MOVING THE MOUSE TO ANY BUTTON IN THE "COMPUTER" WINDOW, ETC, IE. THE MOUSE IS STILL IN THE SAME PLACE IT WAS WHEN I CLICKED THE LEFT MOUSE BUTTON ONCE TO RESTORE THE WINDOW, I click the mouse button again and the window minimizes!...
All I'm asking is if anyone knows of a way to mimic this behaviour in OSX (in the dock) - either within the operating system itself, or with an addon app, etc.
Right now, as you know, in OSX when you click the program in the dock, the program restores, but then you have to move the mouse and click on the yellow button at the top-left of the program window to minimize it again. This is because once you click the program window icon in the dock to restore the program window, the icon is then removed from the dock - thus disallowing the possibility of clicking it again, without moving the mouse, to minimize the program window. I'm trying to see if there is a way so you don't have to move the mouse to toggle the window from minimized to restored to minimized again.
Or to be even more clear...
This next screen shot shows the desktop in OSX (mine happens to be Lion 10.7.5) and we can see that the Firefox program window is minimized into the dock into a Firefox program window icon. I have not yet clicked the mouse button to restore the Firefox program, but I am about to. The red circle at the bottom left of the screen shows where the mouse is...
Here, in this next screen shot, is the screen once I have clicked the mouse button on the Firefox dock window icon and the Firefox program window has been restored...
As you can see, the Firefox dock window icon that I just clicked has disappeared and, in that place instead, the red circle is now over a different dock window icon. The Firefox dock window icon is now missing from the dock and is therefore unclickable. If the Firefox dock window icon was still there, I could just click on it again to minimize the Firefox program window, and subsequently click it again to restore, and so on - like I am able to do in Windows.
I hope this clears things up.

How do i make webpages open with a new tab everytime

I'm sure this is a goofy question but how do I make FF open webpages in a new window or tab when I click on a bookmark?
I know I can right click and do it manually but is there a way to make a favorite open in a new tab when I click on it?
Thanks,
Dean

See:
* https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/

Ok so i dowloaded the pdf editor and only amall screen shows up and i log in but it doesnt let me do anything other that stare at it ... how can i edit a pdf?

ok so i dowloaded the pdf editor and only amall screen shows up and i log in but it doesnt let me do anything other that stare at it ... how can i edit a pdf?

Word processor like "editing" is not tolerated by PDF (the file format/technology discussed and described by the ISO Standard for PDF, ISO 32000-1). Minor touchups are tolerated. The textual characters have to be renderable text (a scanner's output image of text is a picture of text not "real" text).
Open the PDF with Acrobat XI.
Click-path:
Tools - Content Editing - Edit Text & Images
Be well...

How do I make pages open a template on launch?

I just switched from Office Mac to pages because I got a retina macbook, and Office looked all blurry.
Anyway, I made a perfect template for myself and set it to the default, but still when I open pages, it opens the finder window that lets you choose a document. How to I make it open a new document using my template when I launch it?
Thanks!

Pages ’09 v4.3 on OS X 10.8.5.
Pages > Preferences > General : Use template : Choose...
Pick the Template you want, close Preferences. The next time you launch Pages, it will default to the specified Template.

When pressing Ctrl+f to find something in a page the Find box remains open until I close it, in ALL tabs I have in the firefox window. How can I make firefox open the Find box ONLY in the tab I am in?

When pressing Ctrl+f to find something in a page the Find box remains open until I close it, in ALL tabs I have in the firefox window. How can I make firefox open the Find box ONLY in the tab I am in?

Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session. 
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows. 
You can use "History > Restore Previous Session" to get the previous session at any time. 
You may need to click the orange/gray Firefox button to see History. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

We have recently upgraded to windows 7, how do i make the toolbars and panel pane larger. They are t

we have recently upgraded to windows 7, how do i make the toolbars and panel pane larger. They are too small to view

A larger monito is only helpful if the resolution is the same as your current monitor, and they tend to have higher resolutions as you get larger, so don't rush out an buy a larger monitor and expect miracles. If you have a 22" now and it's "HD" (1920 x 1080), you'll see some change as you go up in size, but you'd probably need at least a 27" screen at 1920 x 1080 to notice a real difference.
Right click on the desktop and choose Screen Resolution and you can see the current settings (probably the maximum value which is recommended) and other settings you can use. Lowering the resolution will make everything on the screen larger, but less stuff will fit. Used to be, too that ID did not work will at less than the maximum resolution setting for any monitor.
I did not mean to use the larger fonts feature, by the way, as far as I know that doesn't affect the ID user interface.
The point I was making, rather badly, is that those of us with declining eyesight are getting shafted because there is no way to make use of all the monitor potential and adjut the user interface to make things visible. I just bought a 30" monitor to replace my old 27" which had 1920 x 1200 resolution and was pretty usable, things were about the same size as my old sony 20" running at 1600 x 1200, but even though it is larger in terms of screen size, the new monitor is even higher resolution and things are actually smaller. The only reason I can use it with ID is I know where everything is.

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account. How do I make itunes sync and update my phone without deleting all the current information on my phone?

I have a used mac computer. I want to sync and update my iphone. Currently itunes tells me that my iphone is connected to a different itunes account and will sync, but delete everything from my phone. How do I make itunes sync and update my phone without deleting all the current information on my phone?

Iphone will sync with one and only one cpomptuer at a time. Syncing to another will erase the current content and replace with content from the new computer. This is the design of the iphone.
It will erase the content when you sync.
Why not update from the comptuer with which you normally sync?

How do i make links open in a new tab

Hi There,
Can someone please tell me how to get iWeb to set pages to open on a new tab when links are clicked.
Like when someone is viewing my website, I want the links in that website to open in a new tab within the web-browser when someone clicks on them. I know I can make links open in a New window but how do I make them open in a new tab.
Thanks a bunch
Jason

There is no HTML command to open windows in tabs.
Only these commands are available :
target="_blank"
target="_top"
target="_new"
Opening a new page in a tab is decided by the browser preferences.
In Safari : Preferences > Tabs

How can I make the rolumn and row headers appear on the printed sheet?

I am working in Numbers'09. I want to print out my chart with the column letters and row numbers showing.
How can I make the rolumn and row headers appear on the printed sheet?

g,
Those annotations are called "Labels", and they are only visible during editing when a cell selection is made within the table. If you need to have the labels on your final output, you can create labels in Text Boxes and position them adjacent to the table.
Jerry

When I print a webpage from FF how can I make the text and images bigger?

I am trying to print an eticket for a flight. The text on the schedule comes out too small and the UPC symbol's black lines look ganged together. I know I can view it zoomed up, but how do I make the text and images stay zoomed so they will print out that way?

I upgraded but the problem remains. At least with Firefox I do have the option to print a selection even if it mangles the top and bottom lines. With Safari or Chrome I have no option to print a selection. At the moment the only way to get a complete copy of the selection is to copy to openoffice etc and print from there.

When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

Hi
chorleyman wrote:
you do have to actually define the area to be bounced in the dialogue window that comes up - there are some discrepencies in the way that the program behaves like that,
Apart from the "Include Audio Tail" function, which can leave Logic bouncing for a very, very long time, there are generally, no discrepancies regarding the Bounce Locators:
If Cycle is enabled, the bounce locators will be set to the cycle locators.
If Cycle is off, and regions are selected, the bounce locators will be set to the selection.
If cycle is off, and no regions are selected, the bounce locators will be set from the Project Start to the project end.
It is smart to actually check that the bounce locators are set where you would like them to be.
wildfire31 wrote:
When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop
If you get caught with a bounce that does not stop, Command . (period) should do the trick.
CCT

How do you overlap PDF's and finish with one PDF file? Need help ASAP

how do you overlap PDF's and finish with one PDF file?
Need help ASAP

I'm not sure if you can do that with CreatePDF. Try it; you got one free use when you sign up with Acrobat.com
If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

How do I make PDFs OPEN and fit my screen?

Similar Messages

Maybe you are looking for