How do I make phone vibrate longer for a text message?

I have an iphone 4s and I am wondering how I can set the vibrate longer for a text message. I have it turned on. I have set the vibrate to "Rapid".
I vibrates long for a phone call, but I want it to vibrate longer than a short burst, which is repeated later, on a text message.
Can anyone help?

You can't.

Similar Messages

How do i make a notification sound for incoming texts/messages?

Hi.
I just got my new blackberry 8120, and i'm wondering if there is any way to make a message sound when i have an incoming message either text or email. I've looked through the guide and looked online and no one seems to have an answer for me. Just wondering if its possible and if so how i could do it.
Thanks so much.

You have a lot of sounds can be used, simply go to menu, profiles, scroll down to advanced, normal or which one is active, and you have the option to change the sound in each application.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

How do you change the vibration setting for incoming texts?

I've tried going to settings to change it, even created a new custom one (so it's two taps instead of a very long and battery draining buzz) but the default is still being used. I need the phone to be silent at work, but I'd like a simple "tap" from it when I receive an incoming message. Any suggestions? From other forums I've read, this may be an issue with the Android OS rather than this particular phone.

richr604 wrote:
Thanks I knew this, I like Safari as I want to keep everything MAC, but if I use Firefox the documents open in MS Word straight away, I was just curious if there was some setting I could change?
In Firefox > Preferences, click the Applications tab. If RTF is there, use the pulldown menu in the Action column to pick MS Word. If RTF is not there, there are instructions here for how to add file types.

Possible to make Phone Vibrate twice in a row for a text

I been wondering lately if there is a way to make your Iphone vibrate twice for a text. I know after a few mins it will vibrate again but a lot of the time i never even feel it cause the Iphone vibrate is so weak compared to most phones. So from what i know you can not do this, but maybe in the future they could provide this option. Would be a great little upgrade that would matter a lot to me and possibly to many other people. Cause i know that if im wearing jeans or moving around chances are i wont feel it unless i have sound turned on and i cant always have that.

You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

How to make it a default for all received messages to not preview the attachment but instead show the icon? (mac mail.app)

Hi
I am having trouble with large incoming mail attachments.
When I receive a large attachment (pDf) the useful mail preview feature attempts to show a preview of the attachment. Unfortunately this is causing a lot of trouble as some PDFs are extremely large and therefore take time to open/preview. If I right click the attachment and select view as icon, the problem with that specific message ceases as the attachment is no longer previewed.
How can I make it the default for all attachments in received messages to only be shown as a icon and not previewed?

In Terminal,
defaults write com.apple.mail DisableInlineAttachmentViewing -bool Yes

How can i make it so when i send a message on my laptop that it come from my email and when i send a message on my phone is sends as my phone number. i want them seperate

how can i make it so when i send a message on my laptop that it come from my email and when i send a message on my phone is sends as my phone number. i want them seperate

Hey mims1212,
Thanks for the question. You can configure what address you start new conversations from on both devices:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Please note that this will only work for new conversations, and will also be affected if another iMessage user starts a conversation with you (ex. if a friend sent you a message to your phone number, you will still receive that on your Mac, and you will be replying from your phone number).
Thanks,
Matt M.

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

How do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?

how do I make a drop down list of text in numbers as it is made in the example spreadsheet for comparing cars for buying where you can choose a value from a dropdown list for each car?

Where is this example spreadsheet? Without seeing it I can only guess at what you are asking.
To make a drop-down list (a pop-up menu in Numbers-speak), format the cell as a pop-up then edit and add to the list of items.
If the example spreadsheet is pulling in a dollar value based on what car you chose in the pop-up, it is probably using LOOKUP or one of the other lookup functions, getting the information from another table (a lookup table). If, instead, these dollar values are what you are choosing in the pop-up, then you need to create a pop-up with these values in it.
The Help menu includes a link to a page where you can download the Numbers Users Manual. It also has a link to the Formulas and Functions guide. Both are useful to new users.

How can I make a "property node" for a VI?

Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/Amir

You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world!

Out of nowhere my daughter, who uses a Samsung Galaxy Victory phone is no longer receiving my text messages but I get hers. How can I fix this. I have a 4S and have updated to the 1SO7.

Out of nowhere my daughter, who uses a Samsung Galaxy Victory phone is no longer receiving my text messages but I get hers. How can I fix this. I have a 4S and have updated to the ios 7.0.4.

http://support.apple.com/kb/ts2755
if the link provided doesn't help, then you will need to contact your phone carrier as SMS is a carrier feature.

How do I make a recovery disk for my Mac running 10.5.8?

How do I make a recovery disk for my Mac running 10.5.8?

Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm) in Photoshop Elements 12?

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!

Get a template from Avery. These work well in WORD.
Enhance the graphic in PSE, then import it into WORD.
Free Avery® Template for Microsoft Word, DVD Case Insert 8891

How do I make a photo folder for different event on ipad2?

How do I make a photo folder for different event on ipad2?

These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
 Cheers, Tom

How do I make phone vibrate longer for a text message?

Similar Messages

Maybe you are looking for