How do I make Restore Session work better?

Using version 18.0
I just tried to Restore a session and ended up with one from yesterday. The other day I got one that was several hours old. These both cost me a lot of productivity. If the browser keeps crashing and its not going to restore properly I'm going to have to find another browser.

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created

Similar Messages

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work????

My Iphone 3gs wont charge, turn on, or restore itself in Itunes, but the apple logo still appears when I hold the sleep botton. How can I make my Iphone work???? I know it is not dead because I can see the apple logo on, and every time I connect it to a USB port to charge, or a wall charger, the battery appears with a bit of red. Still, it wont turn on. It's been like this for three days now and I haven't stopped charging it. IT just WONT charge? Any tips I can use to solve the issue?
-Esteban

Hello estebie67,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like the iPhone is experiencing issues upon startup, and may not be loading the firmware or operating system correctly. If you have not already done so, try resetting the iPhone while connected to power:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, it will be best to restore the iPhone in recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Tags do not work after a migration?.. How do I make it to work again..

I've bought a new computer and I've restored my Data using the migration utility. Even thought both computer were running the same IOS version (10.9.3) Tags does not seem to work on the new computer... Anyone out there have faced same issued. How do I make it to work?....
Thanks!

I reply myself....Delete and reassign Tags.... Works again

I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it). Once updated and logged into my I-tunes it no longer works? How can I make those apps work?

I just bought a (used) Iphone 3gs for wife and it had angry birds and $89 Navigation on it (I paid extra for it). Once updated and logged into my I-tunes it no longer works? How can I make those apps work?

Apple doesn't have anything to do with this other than enforcing the DRM protection. The developers of this content expect to be paid if someone wants to use their content. When you purchase content in the app store, you purchase a license to use the content. This license does not permit you or anyone else to resell or give this content away. The individual you purchased the phone from simply does not have the right to sell or give away any purchased content on the phone. You were deceived.

I bought an Apple Airport and the light is flashing a yellow light! I did this because I live in a basement and the modem is in the first floor. I followed the instruction manual and the Airport is not working still. how can I make my Airport work?

How can I make the Airport work?

If there is a modem and not a router on the first floor, then the only possible way to get it to work would be an Ethernet cable connection between the modem and the AirPort Express device.
I think you need to describe your situation in more detail.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

How can I make my dictionary work?

How can I make the dictionary work in my ipad2?

there is no dictionary that comes with the ipad, you download a 3rd party app though.
Was that your question?

How do I make adobe bridge work with canon rebel t2i camera?

I have photo shop cs3 and never had a problem with Bridge before. Now I purchased a new canon rebel t2i and it will not recognize adobe bridge. Anyone know how I can make this work?

I am biased against e-mail for three reasons:
1. All too frequently the message sent is blank and the one posting never knows.
Not so frequently anymore
2. Any edits to a post never get reposted, so those using e-mail are "in the dark".
Yes, but then again, one should read first what was written before sending it to the world (and sometimes it can be pretty to be in the dark...)
3. They do not get the advantage of scrolling up and down the responses to see what others said, reviewing what was said that did not work, or seeing what was not suggested.
That is solved by hitting the links in the email to visit the forum or thread. Mail is just faster and the times I have to look at the history are far less to normal posts. I do find it more confusing with the general forums and I'm clueless where the moved discussions come from, like this thread that seems to be answered and is about an old version and a problem that has been discussed many times before.
Guess old fashoned, but don't see any advantage to having my e-mail clogged with dozens of posts each day. I follow 4 forums.
Don't know what email you are using, I do have Apple mail but used to work with Entourage (the MS Outlook version for Mac) but both do have the option to create rules. I created a folder for each forum or other source that moves the mail automatically to the folders for the particular forums. Also have the option for Smart folders that creates a copy from predefined sources and puts it in those folders for better overview and searching...

How do I make this button look better in GIF?

I confess I am fairly new to Illustrator... but if you can point me in the right direction, it will be greatly appreciated.
All I need to do is to create a GIF that looks as good as a SWF. I have played with all the settings and I can't figure out how to do this!
This is how bad it looks when I exported to GIF
This is what I see in AI. Letters are much better defined.
How do I make AI export a simple GIF and make it look great?
Jose

In the save for web and device in the image tab check anti alias.

How can I make restore disks on my macbook pro?

I just purchased a new 13" Macbook Pro and there are no restore disks. How can I make some?

Easy way is to take an external HD and make a bootable CLONE.
1. grab carbon copy cloner or (my fave) superDuper CLONE app.
2. attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD in disk utility in “Mac OS extended journaled”
3. clone internal HD to target HD (external) [takes about 40 mins depending on size]
4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
if your HD crashes, you can be up and running in SECONDS.
This is the option the pros use for quick restore from a serious crash.
**Remember of course, youll need otherwise saves of your data that come AFTER the clone.
Either that or regularly make a CLONE.
Another option is time machine, but it cannot be booted from.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)

I'm trying to open a folder found in a department drive that i have full access to via a link on a website but nothing happens. How do I make the link work?

The link connects to my G drive and it should open up a folder for me to store things on my hard drive. This works on IE although I usually use firefox at home so I changed my browser at work. Can you tell me how to make these links work so that i can use a website online that will connect to my offline folders?
Would appreciate it very much.

Please update to Firefox 20.0.1 immediately, before continuing using the Internet. Firefox 3.6 is no longer supported and has critical security flaws.

How can i make iMovie -- iDVD quality better??

I have search about the idvd quality in this site but i can't solve my problem yet.
I had a sony DV cam which is PC3, Pal. And I use the imovie..import...edit, then use "share" to idvd...then burn...
So I play the finished DVD in a DVD player, i find many many pixels, the quality of the DVD movie inside is like a VCD. In fact, my DV cam is not the lastest and fine quality, but i surpose the DVD movie should be same quality as my DV cam.
So I use another method to test whether my DV cam....(is model too old, something wrong with my DVcam...)
(1) In imovie, use "share" to my DV cam tape
(2) then i use another converter which is borrow from my friend, is like a DVD burner and player. which can convert the DV tape or VHS...directly convert and save in a DVD disc.
(3) after burning the file. the quality is fine, just like what i shoot from my DV cam.
So what's the problem?? Is the convertor between imovie and idvd not good enough??
Or I need to use other methods? for example, use the imovie export a quicktime movie, then use the toaster make the DVD or VCD is better ?
How can i make it better??

select Quicktime and sele4ct full-quality
That is an option, too, but I use that only when troubleshooting.
iMovie automatically creates a reference movie when it saves at iMovie_project/Shared Movies/iDVD/*.mov. Using the ref.mov instead of a full quality export saves time and HD space.
iMovie sends that ref.mov to iDVD when you press the "Create iDVD project" in iMovie's iDVD tab. BUT: DON'T let iMovie render still images if it prompts it: as a very old nasty bug, it will ruin your stills!!
http://www.sjoki.uta.fi/~shmhav/iMovieHD_bugs.html#jaggystills
...how I wish Apple would finally fix that bug...
You can also use that ref.mov as an input for 3rd party apps. MPEG Streamclip and JES Deinterlacer can "see" it inside the package but with some other apps you may need to copy it out of the package 1st.
Notice also that some 3rd party apps (MPEG Streamclip and JES Deinterlacer do this correctly) may unexpectedly honor the deinterlaced playback setting of the ref.mov so you must uncheck that flag with QT Player before using it as in input. Otherwise the output will be deinterlaced.

How can I make Mail to work with hotmail?

How can I make Mail to sync and work with hotmail, since hotmail is my primary mail provider, I have mail set up to work with g mail but the hotmail account is the one I use the most.

You have to have a premium Hotmail account to allow for POP3, like Gmail has for free.

How Can I Make My Mic work in Skype, it works in FaceTime

Can anybody tell me what i need to do to make my mic work when using skype? it works fine in facetime....

Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Mac pro / Laserjet 4 / Os 10.6 - how do I make the printer work?

Hi,
I have a 2008 Mac Pro running 10.6.8 and an ancient yet still thriving HP Laserjet 4 that I was using over an ethernet/Jetdirect connection with my G5 for years - how do I get them to talk to each other?
I'm running the printer connection through a router, but the Mac Pro has 2 ethernet ports so I guess I can plug the printer in directly if that's simpler. The IP of the printer is 192.168.5.40 and I've tried setting it up with the "Add a printer" dialogue but can't get it to work.
I've read through a lot of posts and looked at a lot of Websites but I can't find step by step instructions for getting the computer to see the printer. I have Gutenprint drivers installed if that helps.
And - just to keep the discussiion concise:
- I know that there are better newer printers that I could buy for cheap, but that isn't going to happen right now.
- I know that 10.6 isn't the most recent OS
I'm hopipng for truly step-by-step instructions that even I can understand.
Thanks!

So maybe it's a problem with the printer's IP?
Yes. As far as your network is concerned, the printer is just not there.
You will not be able to progress until you assign it an IP address accessible to your LAN. Apparently it needs to be 192.168.1.x (a 1 in the place that is now a 5), where x = a large enough number that is not likely for router to assign to other equipment.
Your challenge is to assign the printer that IP address. Let's use the address 192.168.1.150.
HP's support pages for that printer and its Jetdirect card say, rather unhelpfully:
Using the front panel of printer
The IP address may also be changed using the front panel of the HP Jetdirect device. This method of front panel configuration varies greatly depending on the model of HP printer that is being used (consult the User's Guide for the front panel instructions for a particular printer). Click here to go to the HP Web site. Use the Search and search for Front Control Panel TCP/IP Configuration .
I did that and it didn't really get me anywhere, since there seem to be few if any references to the non- "MP" or "V" etc. variants of the original LaserJet 4. So, try to find a setting in the printer's front panel that bears any resemblance to "network settings" or "IP address".
If you are able to navigate its front panel to a place where you can enter the IP address 192.168.1.150 be sure to press GO or ENTER or ONLINE or whatever you think might make the setting "stick" after you enter those digits. Print the same test page you did before, and ensure its IP address has really been changed. Then, then try the ping command again, with its new IP address:
ping 192.168.1.150
If you are unable to determine a way to use the printer's front panel to change its IP address, you should be able to use Terminal to set it. This will get a bit cumbersome so use it only if you are unable to change the printer's IP address some other way:
Terminal is a program in your Mac's Utilities folder.
Locate Terminal and open it. At the command prompt, type the following exactly as written (copy and paste the following to avoid errors):
sudo arp -s 192.168.1.150 00:60:b0:91:21:e7
... and press Return. You will get a warning of impending disaster should you make a mistake, and requesting your Mac's Administrator password to proceed. Type your password (which will not appear as you type it) and press Return. Unless something went wrong the command prompt should immediately reappear as if nothing happened.
Next try the ping command again:
ping 192.168.1.150
You should receive ping responses from the printer as in my earlier example.
If you do, then congratulations because you have made it all the way to Step 1
You still have to add the printer in System Preferences > Print & Fax, using this new IP address, and make sure the Gutenprint driver works.
Edit: The reason your printer works with your old G5 running Tiger is that it is using AppleTalk for communication. AppleTalk doesn't exist in Snow Leopard. This is the reason you must use IP for communication on your Mac Pro. Your old G5 should continue to work with the printer as it always has.
another Edit: HP's support page alleges that the Terminal command arp above will only work with JetDirect firmware versions x.08.03 and later only. Yours appears to be A.05.05, so the front panel option may be all there is. If that does not work I have one more idea but it's an even bigger pain.

How do I make Restore Session work better?

Similar Messages

Maybe you are looking for