How do I make TABs stay. They dissappear when I re-boot?

Just as it says above.  Why do the TABs dissapear when I re-boot, how do I make them stay permanently?

Use Firefox, it can remember your open tabs between sessions.
Also it's a bit more resistant than Safari against the trojans making the rounds as it warns you of any download before it happens.

Similar Messages

  • About visualizer,how can i make it stay full screen when it switched from a video

    play mp3 in itunes,and using its visualizer,if the next song is a music video,it will play the video automatically,but when the video ended,it will not return to the visualizer,how can i solve the problem?thanks(and please excuse for my poor english)

    Try a PRAM reset. Hold down Command-Option-P-R while booting until the tone sounds for a third time.

  • I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    I want to make all my caller id pics full screen how do i do that? When i download a picture from my phone it makes it full screen then it goes back to the small photo in the upper right hand corner how do i make them stay full screen help please:-)

    @Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
    UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
    Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
    You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
    Exit out of Outlook and reboot your machine.
    Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
    Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
    IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
    You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
    Everything should now sync pretty seamlessly.
    I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
    Arthur P. Johnson

  • After I make a note in the notes icon that came with the ipad, it immediately is emailed to my email address and disappears from notes. How can I make it stay on notes?

    After I write a note in the notes icon that came with the ipad, it immediately emails it to my email account and erases it from the note pad. How do I make it stay on the notepad? I don't particularly want it emailed to me.

    I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
    "if i turn on success/failure captions the student will see them while answering" - before submitting
    "if i turn them off he wont know what's the right answer" - after submitting
    My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

  • I purchased CS6 Design & Web Premium.  It appears it is the Middle East Hebrew English version???  How can I make it stay in ENGLISH.  It keep reverting to Hebrew and type runs right to left?  NOT what I asked to purchase?

    I purchased CS6 Design & Web Premium.  It appears it is the Middle East Hebrew English version???  How can I make it stay in ENGLISH.  It keep reverting to Hebrew and type runs right to left?  NOT what I asked to purchase?  [email protected]

    Try setting the text direction with no files open. It should stick for all new files.

  • My calendar notifications disappear about an hour before the event. How do I make them stay for longer?

    My calendar notifications disappear from the notification center about an hour before the event. How do I make them stay for longer? It is it's 5

    This is normal and is how Apple handles photos.
    There are NOT duplicate photos.
    Just as a song is in your itunes library and you can access that exact same song from a playlist,  all  photos synced to iphone are in the photo library and those exact same photos (NOT duplicates) can be accessed from the individual albums.
    It is working exactly as it should.

  • How do you make tabbing skip a disabled field?

    Hi, how do you make tabbing skip a disabled field?
    I have a checkbox. If it's checked, one radio button in a radio button group is disabled. However, user can still tab into this disabled radio button. Once it's in there, it cannot tab out or use up & down arrow to move out of the disabled radio button. It just gets stuck there.
    I tried setting access="protected". But it makes no difference.
    Is there a way to exclude a disabled field from receiving a tab in LiveCycle Designer?
    Thanks.

    You may create your JTextField with the text i.e.
    JTextField myTextField = new JTextField("text");
    or anywhere in your program
    myTextField.setText("text");

  • Sessionrestore occasionally does not show my tabs as they were when I closed Firefox, but as they were some time before I closed it.

    Occasionally Sessionrestore doesn't show my tabs as they were when I closed Firefox, but as they were at some seemingly random (but persistent if trying again) point between starting and ending my previous session. Occasionally they're exactly as they were when I started my last session. I'm currently using Firefox 5, but the problem was already present when I was still using 4. Perhaps it's also relevant that I tend to have lots of windows and tabs open, sometimes to the point of crashing Firefox.

    I've increased my window limit to five too, though I'm unsure if I understand it's function correctly, I've reloaded more then three windows through session restore in the past. Anyway, that didn't have an effect. I haven't used app tabs at all yet, so I doubt that could be the problem. As for closing down Firefox correctly, the problem seems to persist regardless of how Firefox closes, be it a crash, killing it in task manager, or through file>exit. I forgot to mention this earlier, but I've monitored sessionstore.js, and it seems like that file literally stops being modified at some point, regardless if I keep browsing. If there's a way that I could "reliably duplicate" the process, I'd love to help, just say what I should do. It's been happening pretty much every browsing session lately, it seems that if I just browse for a decent while it's bound to happen.

  • How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

    How can I make my phone number active when viewing from a mobile device. My phone number is in my header in CSS

    See this support document http://support.apple.com/kb/HT5661

  • How do I make the plugin run automatically when a photo is imported?

    I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
    How do I make the plugin run automatically when a photo is imported?
    Thanks for  your help!
    Regards,
    Prosenjit

    psaha84 wrote:
    What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
    As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
    You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
    psaha84 wrote:
    How do I save the custom metadata with the image file?
    Lightroom 5 has the limitation, plugin  cannot link the custom metadata fields to XMP file or save them with image file.
    So, is there any alternative way to save the custom metadata?
    Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
    Good luck,
    Rob

  • I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

    I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
    iselect the customer?

    Hi bazza,
    We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
    First let's take James advice and concatenate the address in the address table.
    Here is the formula in G2
    =CONCATENATE(B2&"
    ",C2&"
    ",D2&"
    ",E2)
    It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
    This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
    Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
    base tells OFFSETwhere to start counting from. Click A1.
    row-offset is for the row. we will use MATCH() -1 to give us the row.
    What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
    column-offset tells OFFSET which column A=0 so we want 6.
    we ignore "rows", "colomns" we don't need them.
    If this seems like too much, just break it down into small pieces.
    quinn

  • How do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    how do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

    You didn't say which model of iPod Nano that you have, but generally there should be a lock setting, that can be turned on or off, to prevent accidental changes in settings. And, there is also a setting to turn on or off a feature called, "Shake to Shuffle." It allows you to change songs by just shaking the iPod.

  • HT204380 How can I make the screen full screen when I am calling?

    How can I make the screen full screen when I am calling on Facetime on a Macbook Pro Laptop?

    Ok but if the iPhone 5s and 5 can go full screen the why can't the iPad Air as it too is new the problem shouldn't be hard to solve as I have looked the apple site and it show it just fine in full screen so I'm sure you understand when I say there is most definitely away of doing it so can Apple just sort it out I'm always telling my m8 how good Apple devices are and I've been let down on this so come on fix it PLEASE

  • Please help me how can i make my app store because when i open it it says cannot connect to iTunes please if you have any helpful solution inform me

    Please help me how can i make my app store because when i open it it says cannot connect to iTunes please if you have any helpful solution inform me

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset
    Message was edited by: Diavonex

  • How do I make payment for Creative Cloud when monthly payment declined?

    How do I make payment for Creative Cloud when monthly payment declined?

    In this forum, we can't help with purchasing issues.
    My suggestion is to call that phone number.

Maybe you are looking for

  • OS won't boot--invalid memory address message

    10.4.9 running on a G4 867 Dual. System won't boot from internal disk or from Tiger installation CD. I get an error message for an invalid memory address followed by some hex code. The message says I can type "boot-up" but all I get is the little fol

  • Save as in Excel XP to PDF messes up formatting in Adobe Reader X

    I have windows XP and deal a lot with excel. Recently when I go to save as PDF, it does it without a problem, but wont publish my graphs correctly. What's the deal?

  • Can't add music. Can't restore. Error messages galore.

    A few weeks ago my husband plugged in his iPod Classic 160GB into my iBook. It began to sync music, as per usual. After a short time there was an error message basically saying it couldn't sync "cannot create/read/write" or something to that effect (

  • Create web service data control failed

    I got the following pop-up msg at the end of the WS data control wizard: DCA-29000: Unexpected exception caught:java.lang.NullPointerException,msg=null I have validated the wsdl xml (open in JDeveloper). The schema is in order. It is large wsdl with

  • IP questions

    Hi all, I am new to IP. Can anyone help me in answering the following questions. 1.Input ready query can be enabled in which Bex tools? 2. How many planning sequences can be included in a process chain? 3. Any scenarios for Integrated planning Thanks