How do I make the text in iTunes a lot larger?

I use an old iTunes. Check if there is something in iTunes preferences, but I doubt there is. You may have to simply use something such as Universal Access preferences to zoom your whole screen. I do recall coming across a reference for a hack to edit iTunes fonts in the application itself but if you enlarge the font as opposed to simply tweaking it slightly with a very similar one you are likely to really mess up iTunes display since the rest of the application won't have been designed with scaled up fonts in mind.
I can also personally recommend reading glasses.

Similar Messages

How can I make the text bigger in iCal?

How can I make the text bigger in iCal? I've looked at Preferences and View.

Sorry, did not see that you are using 10.6.7

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out?

This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out? I am using a MacBook.

Press "Command P" and when the Print dialogue box comes up, towards the bottom there is an option allowing you to choose the text size, i.e: small, med, large.
Hope this helps,
NEIL

How can i make the text bigger?

How can i make the text bigger?

1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you.

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

When I print a webpage from FF how can I make the text and images bigger?

I am trying to print an eticket for a flight. The text on the schedule comes out too small and the UPC symbol's black lines look ganged together. I know I can view it zoomed up, but how do I make the text and images stay zoomed so they will print out that way?

I upgraded but the problem remains. At least with Firefox I do have the option to print a selection even if it mangles the top and bottom lines. With Safari or Chrome I have no option to print a selection. At the moment the only way to get a complete copy of the selection is to copy to openoffice etc and print from there.

How can I make the text crisper and less blurry on my MacBook Pro?

I just purchased my first MacBook Pro, and I absolutely love it, save for one potential deal breaker: The text displays blurry. Instead of stark, black on white text, there is a slight halo of grey (or whatever color the font is in) around every character. It makes the text look nice, but much harder to read. The characters are deliberately out of focus. Apparently this is normal, according to this article: http://seattletimes.nwsource.com/html/businesstechnology/2015823073_ptmrsh06.htm l
Is there a way to fix (or work around) this? As a writer, I cannot type for eight hours a day on a computer that "softens" the text. I have tried adjusting my screen resolution (it's at the highest possible) and turning off "font-smoothing" (it's off). Nothing works. I called Apple support and they couldn't help me either. I can't believe there's not an easy fix for this.

Humor me.
Let's revisit the things you did, because they -should- have fixed the problems.
!) to set screen resolution, you MUST use:
System Preferences > Displays ...
Use of the MenuBar item simply shows the last three chosen, not all available.
And what is the screen resolution you are using now? 13" 15" or 17" display? Do you have the default glossy screen or the enhanced matte display?
2) font smoothing.
System Preferences > Appearance.
I see no OFF. I see a checkbox to default to LCD smoothing, and I see "turn off font smoothing for characters smaller than nn point", where nn is 4 to 12.
How do you have these set?

How can I make the text larger in this flashing box from Old Toad?

I'm trying to use flashing text here: http://web.me.com/phelpssculpture/Site/hands_on.html
which I copied from OldToad's site here:http://web.me.com/toad.hall/Demo_1/Miscitems.html
I can't figure out how to make the text larger.
Any suggestions?
Thanks, David

At the end of the code, you can find
document.write('You can add Blinking Text!');
insert a "size" attribute to "font" tag (eg. size="10")
document.write('You can add Blinking Text!');

How do I make the text larger on my desktop?

I want to enlarge to text/font size on my desktop (and in my e-mail and applications, etc - the default) without losing crispness/clarity/focus. I'm sure it is a simple setting, but I can't find it and my font is tiny! I have found other ways to zoom in, etc, but it looks bad and out-of-focus.

For the Finder.
Click on the Desktop, go to the top menu bar View Menu, select Show View Options, make the Text Size option the size you require, close the menu box.
For Mail.
Go to Mail/Preferences, click Fonts& Colors, change the options to the Fonts and sizes required, close the preference box.
Other Applications.
Follow the Preferences link and select accordingly

How do I make the text and overall browser Font's bigger? I'd like to make the actual letters bigger on the websites I am viewing as well as the option menus at top of browser.

Right now when I am using FireFox the FONT and overall text on the web pages are very small. This includes the option menus in top left of browser,the web address bar, and even this here request. Every website I view also shows up with very small font and is hard to see. I would like to make the font larger and cannot figure out how. Please help, Thank you for your time!

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* If a missing item is in the toolbar palette then drag it from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

How can I make the text larger... I cant read it anymore

I need to have the text enlarged..how do i do that.
I cannot read anything on my pages anymore

There are some add-ons that can be used to change the zoom level on all sites, for example:
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

How can I make the text insertion caret/cursor easier to see in InDesign?

I'm using InDesign CS5, and it doesn't comply with Windows 7 Ease of Access settings regarding the text insertion caret/cursor thickness. Is there a fix for this?
P.S. QuarkXPress has the same problem, so whichever software resolves it first wins!

Interesting approach. I see how that could be useful for making things like text box guides easier to see depending on the chosen colors. Unfortunately, it has no affect on the text insertion caret/cursor. It remains the same size and thickness, and it is very difficult to find regardless of how much I zoom in.

How do I make the "text" after the checkboxes visible?

(The Dreamweaver 8 text reads, as follows)
quote:
To add checkboxes to a form:
1. Click in the left column of the sixth row, type
Check all of the musical styles that interest you.
(including the period), and then press the
Tab key to move the insertion point to the next cell.
2. Click the
Checkbox button in the
Forms category on the Insert bar to insert a checkbox in the
cell.
3. In the Property inspector, type
Punk in the Checkbox Name text box, and then click the
Unchecked option button, if necessary.
4. Click to the right of the checkbox in the table, type
Punk, and then press the
Shift+Enter keys to create a new line in the cell.
5. Repeat Steps 2 through 4 to create the following
checkboxes:
Alternative,
Trance, and
Jazz. See Figure 9-33 (Pg.515 Dreamweaver 8 textbook)
The following is the CODE where I added checkboxes to a form:
quote:
<tr>
<td><div align="right">Check all of the musical
styles that interest you. </div></td>
<td><div align="left">
<input name="Punk" type="checkbox" id="Punk"
value="checkbox" />
<br />
<input name="Alternative" type="checkbox"
id="Alternative" value="checkbox" />
<br />
<input name="Trance" type="checkbox" id="Trance"
value="checkbox" />
<br />
<input name="Jazz" type="checkbox" id="Jazz"
value="checkbox" />
</div></td>
</tr>
However, the only thing I see in DESIGN View is this the
previous text, "Check all of the musical styles that interest you."
and the four checkboxes "without" the text that should follow each
box .
Please, help, explain what steps I should take, next, to make
the following words (Punk, Alternative, Trance, and Jazz) visible
in the DESIGN View, following each of the four checkboxes.
Thank you for your help!
This Support Forum is the BEST!
Respectfully, Ona

Sorry - you're sending us to the Webforum which is a real
pain to scroll
miles through to discover what questions and answers there
are. Could you
start a new thread? It looked as if it might have been a
discussion with
Murray but it's really difficult to tell as the last I saw
was Murray asking
you to do something - I think.
Jo
"OnaTutors" <[email protected]> wrote in
message
news:f3iuuc$moe$[email protected]..
> Geschenk, You ROCK!
>
> THANK YOU! THANK YOU, SO MUCH!
>
> You went ABOVE and BEYOND the call of duty! Thank you
for helping with
> the
> other errors in my CODE, too.
>
> You saved my Final Project for my course in Web
Construction 2, due
> "tonight"
> @ midnight!
>
> I've just got 2 more questions to troubleshoot!
>
> Thanx for all of your help!
>
> If anyone is interested, these are the other two
questions that I'm
> TROUBLESHOOTING:
>
>
>
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=189&threadid=
> 1271560
>
>
>
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=189&threadid=
> 1271584
>
> Thanks for helping me out, everyone!
>
> Respectfully, Ona
>
>
quote:
Originally posted by:
geschenk
> you do have some quirks in your current form -- as to
your checkboxes ::
> please replace the current
value="checkbox" with e.g.
>
value="Punk", and furthermore you just need to place a plain
text
> description after the checkbox tag
>
> that´s it ;-)
>

How can I make the »Text Box« blend with the background?

I have a problem that my document is almost finished, but still I cannot solve one basic problem. My “Text box” fields are still selectable (I get the blue select/resize buttons around the text) when I click on them when reviewing my document in the reader. In this “Text box” fields there is text that is not meant to be changed by the end user. It should just be shown (blend with the background) and not selectable. This resize buttons around the text box don’t work and don’t allow the end user to change the size but their presence alone drives me crazy.
Should I use the “Stamp” tool in this case or is there a setting (with the text box tool) that I’m missing?

It seems that I found the solution. Is the only way to avoid the before mentioned edit box that I use the TouchUp Text tool to add text?

How do i make the text font look similar to that in IE?

The text font with which i have been working on IE is different from the text font used in Firefox. I would like to change my text font settings to the one similar to IE's.
== This happened ==
Every time Firefox opened

1. Click Start, click Control Panel, click Appearance and Themes, and then click Display.
2. On the Appearance tab, click Effects.
3. Click to select the Use the following method to smooth edges of screen fonts check box, and then click ClearType in the list.
Same as Morbus suggested. Do this and the font in Firefox will instantly change as desired.
Its now very easy on the eyes, smooth and looks very good as well.

How do I make the text in iTunes a lot larger?

Similar Messages

Maybe you are looking for