How do I make the wired keyboard's USB ports work properly in windows? (Eg. Powered)

I will begin by saying that this tutorial:
http://www.youtube.com/watch?v=s8kVWy8Qf7A
...does not work. Because on my windows 7 bootcamp install, there are no "generic usb hubs" listed in device manager. The keyboard shows up as a Composite device. I still tried adding the regedit, but it didnt work.
So does anyone else know how to fix the powered usb ports on the Wired apple keyboard, in windows 7?

Anyone?

Similar Messages

HT4111 how do you make the hippih keyboard pair with an ipad

how do you make the hippih keyboard pair with an ipad

I know this question is old but I just found out the real answer. After you turn on the little switch on the left side of the HIPPIH AppsKey Keyboard and the blue light blinks, I want you to look just above it. Do you see that hole right above the word PAIRING? Go grab a paper clip and press down in to the hole for about 2 seconds. This sends a signal to the ipad and in the BLUETOOTH menu you should see "Keyboard" under DEVICES. Click on it and dialogue box will pop up asking you to put in a passcode for the keyboard.
It took me way too long to figure this out.
Stupid recessed button.

How can I make the 10/100BASE-T Ethernet port on my Airport Express work as a LAN-port? The AE is currently extending my network (generated by a Time Capsule)

Dear all.
I currently have a WIFI-network established by a Time Capsule. I want to use my Airport Express as WIFI-receiver for my Samsung TV. How do I pair them up so that the 10/100BASE-T ethernet port works as a LAN-port? I used to do it by setting it up as WDS but I understand this is not suitable for a "n" network.
Thx.

Under the wireless settings for the TIme Capsule, make sure that there is a check mark next to "Allow this network to be extended"
Then configure the AirPort Express to "Extend a wireless network". The Ethernet port on the Express is automatically enabled in this type of configuration and the AirPort Express will also provide more wireless coverage in the area where it is located.
See Apple's instructions in the link below. The iilustration shown in the support document shows an AirPort Extreme as the extending device, but the setup for the AirPort Express would be exactly the same
http://support.apple.com/kb/HT4259

How can I make the background inactive when I show a popup in Windows phone 8.1..?

I have created a popup in Windows phone 8.1. But the user can click buttons in the background. Can I disable this feature of popup...ie. I want the background to be unresponsive when popup is shown.
How to achieve this....?

There are a couple ways to do this:
If you set popup.IsLightDismissed = true, when the user taps the background, the background will be unresponsive when the user taps the background. HOWEVER, tapping the background will cause the popup to disappear immediately.
When you open your popup, you can set Window.Current.Content.IsHitTestVisible = false, that should make the background untappable. However, you'll need to set .IsHitTestVisible back to true once the popup is closed, otherwise your app will be unresponsive
until the user closes and restarts it. You can subscribe to the popup.Closed event to tell when the popup is closed.
Ryken Productions

How do I find the address of my usb ports so that I can connect a telescope to the macbook. I have tried various commands on terminal and all I get is 'directory or command not recognised'.

The telescope instruction says open a Terminal and put in ls/dev/* and other such things and all I get back is that none of them are recognised.
JeffersE

Why don't you call the telescope company for support and let them explain it to you. Usually there is software involved with those types of telescopes and if that software doesn't support Mac, it won't matter how or what USB port you plug it into because no drivers or anything will load for it.

How can I make the wireless keyboard work

MMy wireless keyboard was working when I purchased it it at the end of dec. now it's not working.

Please post more details.
Is your keyboard an Apple keyboard. Did you buy it new. Was it in its original packing. Where did you buy it from?
Have you recently put in new batteries. What brand are they?

A7000: How can I make the smartphone as a USB storage when I connect to the PC?

when I connect the a7000 to my PC, it shows the Lenovo_Suit but i want reach my data inside without using the MagicPlus.

1.Plugin the USB cable
2.Pull down the notification area in your phone
3. Select "USB Connected"
4. Select Media Device (MTP)
Go to your PC and you should be able to see your phone as A7000 as a drive in "Portable Devices".

HT1688 How can I make the keyboard go away in an app

How can I make the keyboard go away in an app

Tap the keyboard icon in the bottom right corner.

How can I make my wireless keyboard "discoverable" after replacing the batteries?

How can I make my wireless keyboard "discoverable" after replacing the batteries? Bluetooth keyboard setup said my "keyboard is not connected" when I turned it on today.....assuming the problem was batteries, I replaced them.

I've got it working now.....

How can I get the Voiceover Keyboard shortcuts to show up in a form in which I can copy

I have low vision & have been trying to learn to use Voiceover on both my iPhone & my Mac mini for months. Very frustrating.
1. How can I get the Voiceover keyboard shortcut commans to show up in a form in which I can copy & paste them into a pages document so I can print it out & use for quick reference?? The one that shows up when I press VO +HH won't let me copy & paste it, & it won't show up in the Help section no matter what subject I enter. The help topics shown do not correlate with the topics I'm entering. why is that??
2. Please make the cursor able to be wider, like in the software program Zoomtext, that I used when I had a PC. The razor-thin cursor (in this text box!) in Pages is impossible for me to see.
Thank you for any help you can provide.

http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
You should be able to copy them from there.

Re: How I would make the Toshiba AC100 successful

Hi All,
I post my ideas for improvements here, maybe someone from Toshiba reads this.
The original blog post is here:
http://soltesza.wordpress.com/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/
Please feel free to contribute here or at the blog post.
The AC100 is an early attempt from Toshiba to create an ARM based netbook (a smartbook) with Nvidia's successful Tegra2 chipset.
Although, the AC100 looks like proper hardware design, it became only
mildly successful. Some of the reasons may have to do with the primary
operating system, Android ([see my earlier article about this|http://soltesza.wordpress.com/2010/06/27/toshiba-a100-smartbook-with-android-but-why/]) but even more can be attributed to the design decisions Toshiba made.
Since these machines are now available in my home country (Hungary)
at quite attractive price points (~$250 USD, some people seem to be
trying to get rid of it soon after purchase) I can't help bumping into
it all the time. Sinc[View post|http://soltesza.wordpress.com/2011/05/09/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/]e
I am a gadget fan, I always have my hand trembling seeing those prices
and I need to cool myself down before doing some impulse-buy I regret
later.
What could make me click on the "Buy" button?
*More memory*
First of all, 1-2GB of RAM instead of the measly 512MB the AC100
hosts. Why the heck tried Toshiba sell a netbook with 512MB of RAM when
ALL of the Atom N450 netbooks seemed to come with 2 GB at that time?
This amount of RAM would allow to slap Ubuntu onto the machine and not
worry about running out of memory when loading up OpenOffice. Ubuntu has
been demonstrated on the AC100 and even looks snappy. (see this [site dedicated to Ubuntu on the AC100|http://tosh-ac100.wetpaint.com/]). Toshiba could easily put 2GB of RAM into the machine without major cost-increase.
*Desktop OS and/or Android*
Putting 1-2GB of RAM into the AC100 would open the gate for using a
proper, netbook-oriented desktop OS which can take advantage of the
form-factor. They should use Ubuntu, since that could be fixed up on
this hardware in no time (especially if they purchase some consultancy
from Canonical).
I don't think that Android needs to stay on the machine but if
Toshiba still thinks it is such a good idea for any user-group, they
could make the AC100 dual-boot, or even better, run both OSes in
parallel (2GB of RAM would make this absolutely possible). Android would
be the light-and-easy OS on the device but the user could any time
switch to a full Ubuntu desktop with an Android launcher icon and start
using OpenOffice or other decent desktop software. The
paravirtualization developed by B-labs would be an [instant solution |http://armdevices.net/2011/04/04/android-virtualization-on-ti-omap4-processors-dual-core-cortex-a9/]for this problem and would future proof the machine for a possible Windows8 scenario later.
*More battery*
The 8 hour runtime of the AC100 is decent enough but more
battery-time is always welcome. The enclosure has a LOT of free/empty
space under the keyboard due to the ultra-compact nature of Tegra2 and
its supporting circuitry. Toshiba should again take advantage of the
form-factor and add one or more extra battery docking bays under the
keyboard which could extend the runtime to 16-24 hours. (Admittedly,
they would make the unit weight much more but since these batteries
would be optional, this decision would be up to the user. A 24-hour
runtime with a 3-battery arrangement would make the AC100 extremely
appealing for a large-set of users. It would be acceptable that the
batteries are charged in series (so the recharge process is lengthier)
so that Toshiba doesn't have to switch to a more expensive power supply.
(Although the power supply issue is probably not a serious cost
factor).
*What else*
Of course, there would be a lot of things to be improved (more USB
ports, higher-resolution display...etc) but I tried to draw up things
which require smaller redesign so that an improved version could be
implemented faster.
I believe the AC100 line could be made really successful and Toshiba should take steps to make this happen.

hi there,
I'm new here and I need support from someone...
I buy notebook toshiba ac100 3 weeks before and I suffer major problem...
something happened with my screen , I press the power button and notebook is running /I can tell from turning on play-multimedia button for music and it plays music/ but the screen is not running !
I try many many things, like only on A/C , only on battery , pushing button for switch between screen and ext.monitor , but unfortunately - the screen was still black !
so I connect to flat tv with HDMI cable, and there you go - i have the screen ot the TV , but only there !
my question is this is problem with the screen or something I do wrong ?!
thank you in advance.
regards.

I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

After you go to system preferences/keyboard/input sources as suggested by sberman, click on the + button and scroll down to Portuguese and select that. Over at the right you will see the choices Brazilian, Brazilian abnt, Portuguese. You might want to add all three to see which you like best.
The "Brazilian" layout is pretty useless. It is identical to the US layout and the only way to make accents is via the option key shortcuts: option + n, then o gives you õ.
The Brazilian abnt and Portuguese layouts have dead keys for adding accents over at the right edge of the keyboard. But these may not match what is printed on your keys.
You may prefer to stay with the US layout. On that you can get accented letters by just holding down the base letter and selecting what you want from the popup menu that appears. Or you can use the option key shortcuts.
Another option is the layout called US International PC, which has accent deadkeys on ~, ', etc.
Which ever layout you want to use, you must select it in the "flag" menu at the top right of the screen.
To see which key does what for any layout, use the Keyboard Viewer:
http://support.apple.com/kb/PH13746

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

How can I make the line segment tool repeat several times?

How can I make the line segment tool repeat several times?

If this is what you want, hold the ~ key on your keyboard while dragging with the tool.
If you want spaced copies of the completed line, use the Transform Effects from the Effects menu.

How do I make the wired keyboard's USB ports work properly in windows? (Eg. Powered)

Similar Messages

Maybe you are looking for