How do I make Time Machine NOT access my external drive?!?!?

Even though Time Machine is turned off it keeps accessing my external HD. About every 10 minutes it will run the drive for a short time, the drive used to just sit nice & quiet until I wanted to read/write to it, now the constant on/off cycle is driving me nuts.
Is there any way to stop OSX 10.5 from doing what it's doing??

Because something keeps spooling up the drive @ every 10-20 minutes. Before I upgraded to 10.5 everything worked normally. The drive would just sit nice & quiet & idle until I wanted to read/write to it. Then it would become active, as expected.
Now, however, something in 10.5 is accessing the drive, and running it, for some mysterious reason. Like I said, this happens about every ten minutes or so and it's very annoying.
I realize that I haven't set-up Time Machine, I don't want to use it, this is a work computer that already has several layers of redundant back-up, so I really have no interest in using Time Machine right now.
So if it's not Time Machine activating the drive does anyone have any other ideas? This never occurred before installing 10.5, which leads me to believe that there's something in the OS responsible for this.

Similar Messages

How do I move time machine files from one external drive to another?

My original external drive isn't big enough. So I've bought a second larger one. How do I move the earlier Time Machine backups from Ext Drive #1 to Ext Drive #2 so I can access my full history, and leave Drive #1 for other backup items?
Ext Drive #1= SimpleTech 120 GB
Ext Drive #2= WEstern 500 GB

When you are ready to pass the 320GB drive on, I would format it. That will make the entire drive available to him to use as his TM. I would be sure that each drive has a unique name so that there will be no confusion for TM as to which computer goes with which drive. If you want to start fresh with the 500GB drive, I'd format it as mac-extended-journaled. When you connect it the first time to your computer, you will be asked if you want to use it as your TM. If you are not prompted to select it as your TM, you can configure TM by opening system preferences, click on TM, click on "change drive" and choose your new drive.
Another choice is to follow the steps in my previous response for restoring your current TM to the new drive by booting from a Leopard start up disk and accessing Disk Utilities from there so you can restore the drive. It is essential that the new hard drive is the exact name as the old TM hard drive. In this last scenario you would continue adding to your current set of backups.

How do I use time machine to backup to external drive on other machine on network

I have 2 x McPros, 2 x iMacs and 2 x MacBook Pro all integrated in the same home network. I have a DroboPro Network which can only be recognised as a Shared device by one MacPro only. There are 2 DroboPro 8 Bay RAID devices attached via Firewire to one MacPro.
With Mavericks how can I ensure that
a. The networked Drobo can be seen by all computers as a shared device (it is connected via Ethernet to central Gigabit switch)
b. That, failing the networked Drobo sharing, how can I ensure all computers on network will always have access for Time Machine backups using the DroboPro attached via Firewire to the one MacPro.
Many thanks, it's probably right under my nose.
Darrin

Time Machine will only back up internal and directly connected external drives. It will not back up a network attached storage device. You'll have to use some other software to back up the NAS.

Time Machine not backing up external drive

Recently set up TM using a WD 1TB Firewire 800 Drive. All works fine but...
Have a Lacie 500GB drive that had a power supply failure so had to wait for that to be replaced. That is now done so I put the Drive back into the system. Unfortunately, despite being able to see the drive (Two partitions actually) in the TM Finder window it only shows 'now' for the drive. I can see how to exclude these drives but I don't seem to be able to force them to be included. The Lacie drive was added two days ago so I would expect it to have some sort of back up image by now.
Guidance please.

Well, I've gone and done it now
I started again with the none TM drive and gave it the exact same name as before(changing the format to 'journalled" (it was just Mac OS extended before). I then restored the files onto it using the Clone function in Intego's backup X4 All okay so far and all the important files are now on a pristine 'new' disc. The problems started when TM started it's routine. I now get an error message:-
"*Time Machine Error*
Unable to complete backup. An error occurred while linking files on the backup volume."
I then excluded the drive from the TM Backup and TM was happy with next Backup so it must be the none TM drive that is failing. I reinstated the drive into the back up and I get the error again.
Is there a prefs file or something that I can dump to clear this or should I start again? i.e. Reformat both drives, reinstall the files onto the none TM drive then start TM again. Or just reformat the TM Drive then restart from the beginning letting it pick up all drives to back up?

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

How can I make Time Machine use the ethernet cable to Time Capsule instead of the wireless connection? Wireless is too slow; has been taking 40 hours to create an initial 142 GB backup.

Plug in ethernet .. in the computer.. turn off wireless.

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help!

I need to create a second back-up of iPhoto from Time Machine to a separate external drive. The old iPhoto in TM will not open. Please help! And thank you!

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

Time Machine issues since adding external drive

System spec:
2012 Mac Mini, quad core 2.3ghz i7, 16gb RAM, OS X Yosemite 10.10.2
Problem:
Today I added an external USB 3.0 1TB hard drive to my Mac Mini - a self powered Seagate one. I want Time Machine (running on another external drive - a mains powered 2TB USB 2.0 Western Digital drive) to back this drive up - so I went into the Time Machine preferences pane and removed the drive from the exclusions list to which it had automatically been added (since TM doesn't usually back up external drives)
I moved some data to the drive and Time Machine began to back this up as expected on it's next run. I went to check the TM drive in Finder to make sure it was backing up correctly when I noticed that the folder for this latest backup wasn't appearing - and that the Latest link went to the backup BEFORE the drive was installed. Both Finder and the Time Machine pref pane correctly showed the TM drive space dropping though - and if I went to Terminal and listed the contents of the Time Machine drive, the folder for the current backup appeared and Latest pointed to it as expected.
I let this backup and a second backup finish - so at this point I have two backups that have run since adding the external drive. The backups appear in the navigator on the right hand side - but they are greyed out compared to the others. If you try to click on one of these greyed out backups, TM scrolls back to an empty Finder window titled "Waiting: ...." and the time the backup ran.
I tried rebooting to fix this - when I checked again after rebooting, Time Machine showed the two backups and both were accessible and navigable within the TM restore interface. This was four hours ago. Three more backups have run since my reboot and they are exhibiting the same symptoms as the ones prior - not showing in Finder, not linked from Latest, and greyed out in the TM restore interface.
While I'm fairly confident the data IS being backed up, this is still going to be a problem if I need to restore. Has anyone seen this before and how did you fix it if so?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Time Machine has locked my external drive. HELP

Time Machine hosed me again. After several unsuccessful attempts to backup on my PowerMac G5 dual 2.33 Ghz, I was able to complete my first full backup to an external 2 gig DROBO (USB 2.0 interface). It took 20 hours to do 180 gigs.
Now I have just discovered that Time Machine has made that external drive READ-ONLY! I cannot write to the drive and neither can Time Machine.
Does anybody know what is up and how to fix this short of using root UNIX shell which terrifies me. I just want to take it off and cut my losses, but the drive also has a ton of music on it that iTunes uses.

Okay Jeffery, I think I've found the solution, especially if you are seeing the "Unknown" user in your Get Info window's Sharing & Permissions setting for your drobo.
I had written earlier about my work-around for getting my drobo to work right after getting the "read-only" error from Time Machine. But unfortunately it was a temporary and temperamental fix. There were times then I had to eject the disk and launch Disk Utility to run a repair on the disk which would take more than half an hour on my drobo. But all the while my permissions had this "Unknown" user. Well I decided to "Go UNIX" and see if I could fix this problem once and for all.
I opened up Terminal and typed "*ls -la /Volumes*". This gives me a directory listing of my mounted drive volumes. I noticed that all of my drives, internal, external, USB and FireWire, all had "root" as the user and "admin" as the group, _EXCEPT for my drobo!_ So I forced it to conform by changing it manually by typing "*sudo chown root:admin /Volumes/Drobo\ Backup\ HD/*".
sudo = temporarily enables root mode by asking for your password before executing.
chown = changes ownership to...
root:admin = "root" is the user and "admin" is the group.
*/Volumes/Drobo\ Backup\ HD/* = My drobo drive is named "*Drobo Backup HD*", but UNIX sees spaces as command separators, so you have to use the "\ " to signify spaces within a name.
After doing this over a week ago, _I have not had any other problems_ with using my drobo as a backup drive. It has never come up with the "read-only" error in Time Machine, the Sharing & Permissions setting do not have any "Unknown" users or groups, I don't even need to wait for my drobo before logging in like I did in the past. I just boot my Mac and everything with my drobo and Time Machine just works... No problems!
It seems to be permanently fixed for me, so if you are willing to try this solution, I'm sure it would work for you. If UNIX terrifies you too much, and you do not trust yourself editing the commands above, let me know the name of your drobo drive on your desktop and I will post a message with the EXACT UNIX commands customized for just for you, so all you have to do is copy and paste them into your Terminal window to do it. But like I said, I've done this over a week ago and I not had one single problem.

Time Machine can't find external drive after installing Lion

Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Errors when transferring my Time Machine backup to an external drive.

Hello,
I need some help transferring my Time Machine backup to an external drive. Let me explain what happened.
I have a Mac OSX Mountain Lion that was upgraded to Mavericks when the upgrade came out. Prior to upgrading, I've been backing up WD Passport Mac with the proprietary software "WD Unlocker on it". It worked flawlessly but after upgrading to Mavericks, I decided to backup and noticed that once i inserted the WD Passport, my screen will flicker, windows will close and reappear.
I decided to read up on this and discovered that Mavericks is not compatible with the "WD Unlocker " program on the Passport drive. Since I already have a backup in place, i decided to restore my computer to factory settings and when I attached the Passport drive with my backup on it, My device will see the backup but it will keep spinning for hours without restoring my backup. I decided to read further on this and I got the same Mavericks compatibility conclusion.
I then copied my entire backups.backupdb folder to my Mac desktop and formatted my WD Passport external drive and got rid of the proprietary software "WD Unlocker".. Once this was completed, I then tried to copy my backups.backupdb folder to my external drive within finder. Each time i tried, i get error messages and permission messages. Even when i changed the permission on the backups.backupdb folder to read & write for everyone, i still get the permissions error.
Please helppppp. I have over 500gb of vital data in my backup.
Thank you.

Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

Time Machine Backup across multiple external drives

Hello all-
I have about 1.5 TB of data in my computer (video editing- fills things up fast)... I was wondering if it were possible to tell Time Machine to recognize multiple external drives as the backup volume? I'm not talking about creating cloned backups of my data on different drives, I'm talking about plugging in three 1TB external drives and having Time Machine use them as targets for the backup image.
Thanks

Yes, you can use Disk Utility to create a +Concatenated Raid Set,+ also known as a JBOD (Just a bunch of disks). See the Help for Disk Utility (in your Applications/Utilities folder).
This is kind of the opposite of partitioning: it combines 2 or more disks into a single volume. The three disks won't appear on your desktop or Finder sidebar individually, just the one volume.
I'm not sure that's necessarily the best solution, though. Is all that data on a single internal HD, or do you have, say, OSX, applications, and most of your data on one drive, and media on a second? If so, it might be better to use TM on your main OSX drive, and something else, like CarbonCopyCloner or SuperDuper! on the media.
That would greatly reduce the time needed for a restore, as you'd only have to restore the drive that failed.
It could also reduce the amount of storage needed, as you might not need (or want) TM's hourly backups of the media files, and keeping all the previous versions. Using another app would allow you to back that data up somewhat less frequently, such as once or twice a day.
But, of course, it all depends on your situation and preferences. As usual, there are many options.

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

Transfer Time Machine backup from one external drive to another

Surely this has been covered, but I can't find it.
If you have your time machine backup on an external drive and get a new (larger) external drive, what is the best way to transfer the backup from one drive to the other (and define the new drive as the backup drive)? Straight copy ? Then to define the new drive, rename old drive to something else and name new drive the backup name?

I haven't tried this yet but a few other methods are described at http://www.macosxhints.com/article.php?story=20071128055047339

Does Time Machine require a dedicated external drive, or can it include other files?

After a misplaced library file, I'm having problems restoring some of the content on my MacBook Pro. I have a Time Machine backup on an external drive, but the drive also includes lots of other files that I want to exclude from the restore process. I'm concerned whether the Migration Assistant will scoop up everything on the drive.
The laptop is still running on Snow Leopard 10.6.8 for specific reasons (although I have Lion 10.7.5 on my iMac). I presume Time Machine and the Migration Assistant are the same on both operating systems -- but I'd better ask here first.
Thanks for any help with this question.

David Henderson7 wrote:
Another good idea. Thanks, FatMac!
For a long time, I was leery of putting too much stuff on one drive. It breaks, and you lose everything. But you're right -- the prices allow for even two 3TB externals that could manage backups of backups for paranoid types like me. And that's in addition to the internal drive.
Welcome to paranoidville. Staples has been selling Toshiba Canvio 3 TB externals for $120 and even though they must have green drives inside because they run a lot cooler than Seagates (of course they do, also, have ventilation), being fed from an SSD I've seen transfer rates of 130+MB/s connected to USB 3.0 ports. I have one set up with 4 partitions and maintain a rolling backup of the boot disk with BU dates recorded for each partition. A second Toshiba has a single periodic BU of the Mac Pro as well as a bootable backup of the rMBP and what passes for a Windows 8 backup of a Lenovo laptop. A third has the rMBP TM partition and a series of rMBP backups (that was originally used for testing and using the rMBP for a week without touching the rMBP SSD in case there was an image retention problem or some other issue, since the internal SSD can't be securely erased and I had 14 days to simply return it).
You can never be too rich, too thin or too backed up.

Time machine back up other external drive?

Hi folks,
My HD is filling up fast. What I need to know is if I move say, my music and photos to an external drive, will time machine back up the music and photos when they reside on the external drive? I have time machine running on an external drive dedicated to time machine. I'm using OX Mavericks.
Thanks,
Steve

Mine is set up similar. I use TIME MACHINE as a back up and then my redundant back up is to a 2 terabyte USB External, so now I have everything backed up twice.

How do I make Time Machine NOT access my external drive?!?!?

Similar Messages

Maybe you are looking for