How do I make transitions between clips smooth?

how do I make transitions between clips smooth? Right now, when I play my video in imovie, the clips freeze or jump between clips.

Have you tried sharing the final movie using the Share menu, or, alternatively use FILE/FINALIZE PROJECT?
The final product shouldn't have any lag. iMovie itself should not have any lag, but could depending on your Memory and hard disk configuration.

Similar Messages

How can I insert transitions between clips?

I finished editing my seperate clips and now want to insert transitions between the clips, but that menu option is grayed out, so is the Movie Properties menu. What do I do?

Clips are in a Project timeline?
just drag the transition btw. them ...

How can i make a transition between clips on cutaway?

how can i make a transition between clips on cutaway?

ninafromlisboa wrote:
But if I want ONLY fade out (or in) I can't do it...
OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
John

How to apply transitions between clips in the same track?

Hey guys,
I'm in Uni on Final Cut Pro 5 and all the videos and discussions tell of how to apply transitions between clips in the same track.
I like to have my clips on different tracks so that I can overlap them at specific points but I don't know how to do this?
If I have track one. . .which ends. . .and have track 2 beginning below that (and have it overlapped for a few seconds) I don't know how to enable the transition at the point where track 2 begins.
Can anyone help?

Yep I understand that.
Let's say I overlap track 2 as I don't like the beginning of it. . .so I want the transition from the end of track one to track two to occur in the middle of track 2 - should I just trim the track to the point I want the transition to occur as opposed to have it overlapping?

I can't add transitions between clips, but between generated media?!

I can't add transitions between clips, but between generated media?! Any ideas?

I am assumming you are working with "connected clips" which are either above or below the main storyline "track" (the one you put your first project clip onto when you started the project). You can only add transitions to clips that are on either the primary storyline or on a created storyline. Select the clips you are working with then choose the Clip menu and the Create Storyline selection. Make sure snap is set to assure your clips are really butted up against each other. Then apply the transitions.

How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

Dears,
I have IBM Flex server with built in storage,
HOW to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

Microsoft Failover Clusters require shared storage. If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com). If you
use third party software, you will need to follow their instructions for configuring the environment.
Questions on how to configure Exchange environments are better asked in an Exchange forum.
.:|:.:|:. tim

How do you make a movie clip face the mouse

How to you make a movie clip rotate so it's always facing the
mouse?

thanks a lot! I got the code to work, I just modified it a
bit.

How can I do a simple fade transition between clips??

I'm trying to learn my new Premiere Elements 9. I am a simple man, with simple needs. I like to just do a simple fade transition between video clips. There is no "fade" option on the transitions for PE9, I have tried "cross disolve" and "non-additive disolve", and they are freaking wierd. The one that comes the closest is cross-dissolve, It fades out the first clip fine, but the follow on clip starts with an awkward momentary freeze frame, which is not acceptable.
Any thoughts?
Clem

A "fade" is a just that. It fades to black.
Fades to black are far from weird.They are very useful for indicating a complete change of subject or chapter in a long video story.
I think you are using the wrong descriptions,
Probably you want a cross dissolve where one scene slowly dissapears while the next one appears, the average picture level being constant.
There are two of them provided in transitions. Cross dissolve (what you call a fade) and non additive dissolve.
They both work perfectly if you apply them correctly and you have set up your project correctly to match your video camera or slides. (see many other posts on this)
You simply drag the 'transition icon' for the dissolve to the cut line between the two clips. Cant be any easier than that can it?
If you are seeing jerky results, it is because your computer is not fast enough to preview unrendered video (or set up right) - so render it!
As I said there should be no red lines at the top of the timeline where the transition is (otherwise render just that red part of the timeline)
More advanced:-
The dissolve period plainly shows in the video track. You can have it before, centered or after the cut depending on where you want the dissolve to start or finish in relation to moving objects in the video. (Right click and select effect properties to adjust)
You can even change the speed of the dissolve by dragging the edges of the effect boix in the timeline

How do I delete space between clips in the timeline.

I am adding several hundred photo's to the timeline. When I add them as a group, the the duration of each photo differs. I select a group of photo's, change the duration to 4.00 seconds and the clips change to 4 seconds but then there is a large space between each clip. Is there a way to select a group of clips in the timeline and have them connect to each other? How can I remove the space between clips?
Thanks for your help.

What you are describing happens when you have the position tool selected.
Hit 'A' to make sure you are using the select tool (also known as the 'Arrow' tool, hence the 'A' shortcut).
Unfortunately, your screenshots do not show which tool is active, but I am pretty convinced that that is your problem. Like Russ said, their look pretty similar to each other. But they work very differently.
Here is a picture showing the arrow tool (in blue):
And here is one with the Position tool (again, in blue):

How to create a transition between tracks

I have a 3 minute sequence that I would like to loop in DVDSP. I have duplicated the sequence into
two tracks and set end jumps to ping pong between track 1 & 2. So far so good. How can I create
a transition such as Dissolve to transition between track 1 and 2. I have set transitions but can only
simulate a cut when looping between the tracks. Help appreciated!
DVDSP 4.2.1

I think DVDSP doesn't offer anything like a dissolve, so here's a suggested hack:
In your FCP timeline, duplicate the segment so that you have three copies,
one after the other. We'll call the three copies A, B, and C. Put the transition
between A and B, and between B and C. Make sure that A begins appropriately
(maybe a fade up from black), and that C ends appropriately (maybe a fade to black).
Now export and compress each segment and include in your DVDSP project.
Create a track in DVDSP, and decide the maximum length of time the track will run
(this is a guesstimate). On the track's timeline, put the segments in this order:
A B B B B B B B C, with the number of repeats determining the maximum length.
I realize it's a hack, but it should work. When exporting from FCP, be careful
to get the in and out points correct.

How do you make one long clip camera import FCPX

Does anyone out there know how to make one long clip from a DV camera import in FCPX??? Why the designers thought it was a good idea to chop the clips up during import is beyond me...

You're expecting one continuous take to import as one single clip, right?
From my experience with DV-format cameras like the Canon HV20, it's not unusual for there to be enough of a discontinuity (control track??) to create two or more successive clips when importing, dropping a small number of frames between clips. This could be caused by dirty heads or a tape that has been used more than it should.
A string of separate takes should import as separate clips, I believe.
Hope this helps.

Transition between clips

Hi again,
I'm having trouble putting the "doors" transition between my clips - have zoomed in and there is no smaller clips in between. If I have not allowed for the extra frames (or handles) after trimming clips, is there any way to remedy this?
Thanks.
P.S. I can actually put the transition in, but other frames I don't want show up even though I have trimmed everything off and deleted and closed gap between clips!

Snap is a function available (toggle with the S key) in the Timeline, where when a Clip, or a Transition, is near to the beginning, or end, of a Clip, the object being dragged will "jump" to those junctures. This makes dragging and dropping Clips, for instance, onto the Timeline, so that they are adjacent to previous, or following Clips. I leave it on most of the time, as it speeds up dragging, and dropping. It will also function, if, one is click-dragging the Tail of one Clip, and they want it to expand only to the Head of the next Clip.
Now, remember, Snap sees the entire Timeline - all Video and Audio Tracks. If one has Clips on those, even if they are scrolled out of view, Snap will function on them, as well. This can get a bit confusing, when many Tacks are populated, especially if they ARE scrolled out of view.
Snap gets in the way of trying to do things like repair OOS (Out Of Sync) issues. As one slide the Audio Clip, it will want to jump to the beginning, or end of another Clip. That is usually NOT what the editor wants. There, I turn it OFF, so I can effortlessly slide my Audio exactly the number of frames that I want, without having to "fight" Snap. Again, I turn it back on, when I go back to general editing.
There is one instance, where it can cause issues. Do not know if this has been changed, as of PrE7. It is especially common, if one is zoomed out on the horizontal view of the Timeline. Basically, if one is too forceful, when dragging and placing an Asset onto the Timeline and they "jam" this new Clip up to the Tail of another with too much "force," Snap will allow one to jump slightly past the Tail of the existing Clip by a Frame, or two. That alone would not be a big deal. What happens to those Frames, however, can be. They get sheared off and then are placed at the end of the last Clip on the Timeline. If one shortens the Duration of several Clips along the way, these one-two Frame "orphans" stay out at the end. One can end up with a desired Duration of say 00;10;39;00, but in reality the Timeline might be 00;11;00;00. It is because of the orphans way out past where the editor "thought" the Timeline should end, and they are often out of sight, unless one hits the \ [backslash] key, to zoom out to the full view of the Timeline. Then, the orphans will be seen. One of the last things that I always do, before Export is hit \, to see my entire Timeline. This checks for orphans, and also any Clips that I forgot.
If Snap is OFF, what happens when you have a Clip on the Timeline and drag another "over" it, is the first Clip is "rolled up," i.e. its Out Point is moved in, from where it was set. Now, there are no orphans, but one has shortened the first Clip, and that is usually NOT what they want to do. Careful, non-forceful use of Snap will allow one to butt the dragged Clip right up to the previous one - just do not JAM it in there. Be gentle, like you were working with original film and not digital media.
Hope that this helps,
Hunt

When i try to drag a transition between clips i get a little x :S

when i try to drag the cross dissolve transition between to video clips "avi uncompressed"
a small x pops up beside the cursor.
is there a reason for this ?

Oh boy, here we go.
A handle is unused media at the front and back of a clip. If you are using a clip in its entirety in your timeline, there is no way to add a transition to it.

How do I make DVD with clips from 2 different iMovie files?

For some reason, my movie clips got imported into 2 different files. And now I can't make a DVD using clips from both. Should I reimport the movies? And if so, how can I make sure they all get imported into the same file?
Thanks!

I apologize, but I am still unsure of what you mean...
"When I open iMovie, at the top of the screen, it says: iMovie: 4-22-2005. But there is also another file with another date."
There is another file where? What kind of file? Is this a clip you are talking about or another project? Another file within the project? On the clip shelf? A completely separate project folder?
"How do I ensure that it just goes into the same file/folder?"
When you open a project and then import clips they all go into the same folder of that project by default and by design. iMovie is not designed to allow you to import some stuff here and some stuff there. When you create a project, a folder system is setup and in that main project folder is a media folder. All your work files (video footage, audio files, etc.) get put into that folder and no others.
Patrick

How can I put transitions btw clips that both use green screen?

Seems that when I drop the transition between the clips (between the backgrounds -- it won't let me drop the transition between the videos shot with the green screen), it then pushes the green screened video clips together, and the transition doesn't play at all!

iMovie does all rendering in one pass. This effect would require a nested render, which FCP excels at.
If you want to do this in iMovie, do the first green screen clip. Share it using Export Using QuickTime in Apple Intermediatae Codec. Do the same with the second green screen clip. Then import both clips into an iMovie event. Now you can drag both these clips into a project and put a transition between them.

How do I make transitions between clips smooth?

Similar Messages

Maybe you are looking for