How do I make use of the Composite Video input jack on my HP pavilion Elite m9150f computer?

I have a Pavilion Elite m9150f computer that has front panel jacks labeled "Composite Video Input,and Audio left and Audio right input" They are all RCA type.None of the PDF type manual files mention these jacks.I would like to make use of them to input video from either my old VCR that has the same output jacks and or a DVD player that is also equipped with the same set of output jacks.Finaly, I would like to know what programs should I use to view the video that I connect to these input jacks? Thanks for any and all ideas.

If your m9150f still has Cyberlink DVD Suite Deluxe and the Hauppauge TV tuner installed, then you can use Cyberlink PowerDirector v6 to capture home videos from a VCR as MPEG2 movie clips (.mpg). The files can then be played using Windows Media Player or burned to disc using Windows DVD Maker. You can also edit the movie clips with PowerDirector or other video-editing software. MPEG2 video is not ideal for editing: there will be some loss of picture quality when the video is re-encoded. To minimize that, make your edited videos short and do not reduce the bit rate. Note: The jack on the back of the m9150f is Video Composite-01, the one on the front is -02. Be sure to select the right capture source in PowerDirector's Capture / Device Setup / Video Setup tab. I can't think of any good reason to use Composite jacks for DVD input as long as your m9150f has a functioning DVD drive.

Similar Messages

  • Hello, I bought a song on iTunes that has a music video to it, but I don't want the song to play the music video. How can I make it so the music video isn't played?

    Hello, I bought a song on iTunes that has a music video to it, but I don't want the song to play the music video. How can I make it so the music video isn't played?

    Hello, iBillyxD. 
    Thank you for the question.  The best way to avoid this behavior would be to delete the music video from your library.  You can always download it again free by accessing your previous purchases.  To delete and item in your iTunes library, select the item and hit delete on your keyboard. 
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Cheers,
    Jason H. 

  • How do you make use of the 2nd Ethernet port on the Mac Pro?

    My Mac Pro's ethernet port connects it to the local network and the internet.
    Under what circumstances would I make use of the 2nd port?
    Are there any settings I'd have to set up in system preferences to make sure one is used for some things while the other is used for different things?
    I'm asking because we might be making some changes to our network. We have a printer with a Fiery RIP and I'm pretty much the only one who prints to it. I was wondering if we could/should set up a direct, dedicated connection so that network traffic won't bog down print jobs.

    The main use for that port today is to create a subnetwork for Internet Sharing. Software inside the Mac can act as a Router and provides new DHCP Addresses for the subnetwork. In general, the devices on the subnetwork would be inaccessible from anywhere else, due to Network Address Translation.
    If you are concerned about heavy network traffic, consider upgrading your Switches (not Routers) to Gigabit Ethernet speeds and using Jumbo frames. (Routers are not involved in peer-to-peer transfers such as Printing when no Address Translation is involved.)
    If you have an Industrial Router, you can combine the two Ethernet ports into one composite link for faster-than-Gigabit effective speeds, but it requires a special Router not generally available.

  • How can I make use of the CSS feature?

    <p>Hi </p><p>I am using Cr4E to design a report that will be deployed over the web both as an html page and in PDF format. I now want to assign styles to the fields in the report so that the PDF and the HTML version look differently . </p><p>My questions:</p><p>1) Is there a short explanation on how to that properly?<br /></p><p>2) I assume that the CSS styles will only  be used in the HTML version and will be ignored in the PDF. Is that correct and - if not - is there another way to apply different styles to the PDF and HTML? </p><p> </p><p>As always any suggestions are highly appreciated!</p><p>Peter Buchmann from  a rainy Zurich, Switzerland </p><p> </p>

    <p>Hi Peter, </p><p>Ok, I learned something new on this one as well. It appears that the JRC has not yet been updated to include CSS support. As you mentioned, the CSS feature will enable specific output when rendered in our HTML viewer. So to answer your question, yes, if this was indeed supported, it would provide a different output when viewed over the web as opposed to PDF format.</p><p>Now, I know the next question you have is "If it is not supported, then why is it exposed?". There are actually 2 reasons for this:</p><ol><li>This same Designer is also bundled with IBM Rational Application Developer. With the RAD integration we include an Enterprise Repository Explorer view which will allow users to publish reports to a BusinessObjects Enterprise or Crystal Reports Server system. On these systems the CSS field will work.<br /><br /></li><li> Backwards-compatibility - if you open an existing report designed by the external designer then you will need to ensure that all of the properties are re-saved when the report is saved in the CR4E designer. Users can still modify these values, it&#39;s just that they will not be honored by the runtime engine.</li></ol><p>The good news is that we should have support for this feature in the next full release of Crystal Reports for Eclipse. Unfortunately, I don&#39;t think I can officially comment on timelines until early next year, once I get some resource commitments. </p><p>Regards,<br />Sean Johnson (CR4E Product Manager) </p><p>P.S.</p><p>Did I mention I live in Vancouver? We have 2 seasons in Vancouver...the rainy season and August. </p><p> <strong><a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a></strong>          </p>

  • How to make use of the Legend from XY graph?

    The hardware i am using will create a plot everytime i do a scan. I will upload the it result(plot) to another XY graph. I try to create a multi plot on the XY graph but it seems not working. I am wondering how can i make use of the legend that come with the XY graph to solve my problem.

    Hi,
    You should be able to plot as many XY arrays to the graph as you need. As long as you don't delete the previous plots they should remain there. This will make things much easier than dealing with 2 graphs.
    There is an example at "C:\Program Files\National Instruments\CVI70\samples\userint\graphlegend.cws" that you can look at for an application with multiple plots.
    I hope this helps.
    Regards,
    Juan Carlos

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • How to make use of the presentation variable in SQL result query

    I have 2 prompts in my dashboard.
    Prompt1 decides the values of Prompt2.
    I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
    To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
    SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
    the query is resulting into
    SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
    but the value in selected_comp is "ABC".
    Can anybody help in how to make use of the presentation variable in query to get the correct value
    thanks
    Shubha

    Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
    Thanks,
    Venkat
    http://oraclebizint.wordpress.com

  • How to make use of the 'Groups' in Screen Layout?

    Hi All,
    I have a screen with 10 input fields (F1, F2, .. F10).
    I set the 'Groups' attribute in the screen layout to 'DIS'.
    How could I make use of this 'Groups' attribute so that when I loop the screen, I will only disable fields with the 'Groups' attribute set to 'DIS'? Thanks
    I tried the following codes, but it's not working:
      LOOP AT SCREEN.
        IF SCREEN-GROUPS IS NOT 'DIS'.
          SCREEN-INPUT = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    It says ==> The data object 'SCREEN' does not have a component called 'GROUPS'.

    In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
    SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
    The first text box under Groups attribute corresponds to SCREEN-GROUP1,
    2nd text box for SCREEN-GROUP2
    3rd text box for SCREEN-GROUP3
    4th text box for SCREEN-GROUP4
    Hope this helps.
    Thanks,
    Balaji

  • How to make use of the FM EDIT_TEXT_FORMAT_DOC

    Hi frnz,
    How to make use of the FM
    EDIT_TEXT_FORMAT_DOC
    Could anyone explain with an example how to use this
    regards

    hi
    I need an example please....
    did any one use that FM
    Regards

  • How to make use of the crypto modules in the new Sparc T2 processors?

    Having just received some frontal indoctrination about the features of the new Niagara (T1/T2) processor platform, I've started to dig around its ncp cryptography support cores a bit, but I've got a few open ends that I hope someone here can tie up for me..
    - Is there any way to make current OpenSSL take advantage of the ncp cores? The FAQs don't mention it anywhere except a general "Included ability to use crypto hardware options". Does this already include Sun ncp? The openssl derivate that comes with Solaris10 is antique and I really want to replace it.. but if that means losing hardware support, I'm considering ditching the T2 altogether and going for US4+, doing crypto in the "old" way on the main cpu cores.
    - The Niagara crypto blueprint mentions some commands to run speed tests, which I did on a T2000 server I've got around here, and on an old 420 in parallel, and I got some results that puzzle me:
    The T2000:
    sign verify sign/s verify/s
    dsa 512 bits 0.0001s 0.0001s 13025.0 11979.2
    dsa 1024 bits 0.0001s 0.0001s 12835.7 12426.3
    dsa 2048 bits 0.3030s 0.6135s 3.3 1.6
    The 420:
    sign verify sign/s verify/s
    dsa 512 bits 0.001171s 0.001427s 853.8 700.7
    dsa 1024 bits 0.003521s 0.004292s 284.0 233.0
    dsa 2048 bits 0.011990s 0.014306s 83.4 69.9
    The T2k looks nice for short keys, but does it really drop from 13k/sec to 1.6/sec for the 2kbit keys, or is that a display bug?
    If not, does that mean that the ncp in the T1 cpu is limited to 1kbit keys, and if I intend to use longer DSA keys, I better stay doing it on normal CPU core?
    I see the same huge performance drop in RSA when switching from 2048 to 4096 bit key sizes. Ok, RSA isn't really that popular anymore.. but even DSA-1024 is aged a bit and many crypto researchers recommend the 2kbit key sizes already, at least for applications that are supposed to be running for a few years.
    Are there any improvements being made in the new T2 cpu series, compared to the T1 I ran the tests on?
    - The T1/T2 brochure also lists functions like crc32, md5, sha1 hashing algorithms in the crypto cores - how can I make use of those? I've got a few applications that do heavy checksumming and file hashing, and I'd love to offload these operations to the crypto cores; however I couldn't yet find any tool that allows me to do that. The regular md5sum binaries coming with Solaris still do the math on the main cpu core.

    I'd love to, but I don't have the money for a T2 system, and even if I did, I don't have the time to play with it right now anyways :(

  • How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

    How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

    99jon wrote:
    Perhaps it’s a design feature to speed up the Organizer launch.
    I am sure it is.
    - The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
    - The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
    - The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content,  totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
    So yes, the purpose is:
    - to speed up switching modes
    - to help folder organization fans to migrate to tags organization
    - to hopefully get rid of the old folder organization bugs

  • I use windows and i got my hard disk replaced now when i try to sync wirelessly my ipod detects my computed as being a different one how can i make it forget the old one?

    i use windows and i got my hard disk replaced now when i try to sync wirelessly my ipod detects my computed as being a different one how can i make it forget the old one?

    You will have to sync it to the new one, erasing the current content from the ipod and replacing it with the content from the new drive.
    Make sure you have copied everything from your backup copy of your computer back to the new drive first.

  • HT5114 I lost my iphone 5 without signing out my account but I have bought another one. How can I make sure that the person in possesion of the phone is not using my account to make purchases? ?

    I lost my iphone 5 without signing out my account but I have bought another one. How can I make sure that the person in possesion of the phone is not using my account to make purchases? ?

    Thanks for your prompt response... will changing my password also stop the authomatic download of my new applications and music from downloading to the stolen phone?

  • How do you make mobile numbers the default number used in your contacts for sending text?

    How do you make mobile numbers the default number used in your contacts for sending text?

    Go to your contacts, find the contact that you wish to text, hit 'edit', and move that contact's numbers around until the mobile number is at the top. Arduous I know, but it works. Now when you go to text that person, the mobile number should be the default.
    Best.

  • How to make use of the spare physical memory under buffered I/O of Essbase

    We encountered an issue of the physical memory allocation of the server running Essbase with buffered I/O mode. We have implemented some cache setting in Essbase but still found that the disk I/O is quite high. Also we observed that Windows 2003 server cannot make use of the spare physical memory available as the system cache for database files of Essbase.
    As allocating more memory as Essbase cache might not help, we would like to know other than changing to direct I/O mode, any other options can improve the disk I/O performance?
    Thanks!

    Sandeep Reddy wrote:
    Hi Hyperion_User,
    1. Disk IO performance,It mighe depend on quite a few things , one of the aspects might be your storage system. It can depend on the disk configuration too ( i.e if your disk is SAN or NAS, then it depends on the configuration like Raid ..etc).
    2. It depends on the HBA ( host bus adapter).
    3. Let me try to explain with diagram.
    http://www.c-sharpcorner.com/uploadfile/freebookarticles/apress/2008dec16010208am/DataStorageDesign/Images/159059214X-1404.1.gif
    4. It might depend on the HBA and even on the switch speed.
    5. Buffered IO is a very generic setting,which most of them use( that should not be an issue).
    6. Even if you have 30 to 40 GB free memory, every application in essbase has a limitation to it maximum usage ( 2 GB on windows ). Refer to DBAG for more information on this .
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/
    Thanks for your detailed advice. I just wonder if more physical memory can help to improve the disk I/O being used for concurrent read/write access. We are using Windows 2003 Enterprise Edition and not sure whether some spare physical memory can be used for this purpose.
    Thanks again!

Maybe you are looking for