How do I manage Airport in Server?

I can not use Airport anymore and I can't see my Extreme Router. How do I edit router now?

Airport Utility is separate from Server.
Airport Utility is used to set up your wireless devices (Airport extreme, Time Capsule, Airport Express) and can help with diagnosing problems. It's installed with all versions of OS X back to about 10.2, although the design has changed a lot recently. You should find it in the /Applications/Utilities folder on your Mac hard disk.
If you have issues with your Extreme, connect it to your Mac with an Ethernet cable. That will get round any WiFi problems and make it visible to Airport Utility. You can configure it while it's connected by cable then, when you're happy it's OK, make the cable away and check the WiFi works. If you're having issues still, try posting in the Wireless group.
You're right not to install Server until you have your WiFi issue resolved - you need a reliable network connection to get anything done with Server

Similar Messages

Enter Airport Password to Manage Airport with Server

I have today downloaded an update to the 10.9 server for a Mac Mini Server. However, when I get to a particular pane, I'm asked to "Enter your Airport password to manage Airport settings with Server"
Have surfed the net and looked at similar occurences with past operating systems, it seems I am unable to get past this hurdle of the password. My Apple Network includes a new Apple Airport Extreme Router, (the tower model) and whilst I methodically noted every setting when installing the equipment, it doesn't want to recognise the designated password.
We are wireless here and with four Macs running, this is the first hic in a while with the system. I'm on high speed fibre optic broadband, getting 55 Mbps.
Any thoughts please?

Hello,
Try to fix disk permissions first with disk utility and then open the terminal an put the comand
sudo su
#password
erveradmin command web:command=restoreFactorySettings
was worked !!!

How to remotly manage Airport Express on XP

I have a new XP machine...
I used to manage my Express with Airport Admin Utility for Windows v4.2
I cannot locate this utility on Apple site.
Has this tool been replaced?
Please Help

I found the answer to my own question...
The Airport Admin Utility 4.2 to manage Airport Express from XP can e found there...
http://www.apple.com/support/downloads/airport42forwindows.html

How to remotely manage OS X Server

I recently picked up a Mac Mini to run a household server, and have installed Server from the App store. In the past to manage an X-Serv I used either Server tools or Apple Remote Desktop to access the server and managage it remotely.
For home use I do not have a license to ARD, and at $79 do not plan on buying it. It seems the server tools have been depreciated.
I get the feeling that what Apple expects me to do is download Server on my Macbook as well as on the Mini and use that to managage the Mini.
Is that the cannonical way these days?
I know I can shell into it, but most of the managment is set up for GUI rather than command line and trying to remember the differences between LINUX and DARWIN is not something I want to get into at home.

Lots of ways to manage it remotely:
Screen sharing via LogMeIn (free). www.LogMeIn.com
Establish VPN session to your server's network, and then run a copy of the server admin software on your local mac, and it will see the remote server over the VPN, and manage it.
SSH access (command line access). Good for various command-line things. Especially helpful for issuing that quick reboot command when things have gone terribly wrong and nothing else is working..
Screen sharing (VNC) tunneled over SSH pipe. I use this option of built-in screen sharing, because it means I don't need to leave any extraneous screen sharing ports open at my firewall, and I restrict SSH access on my server to only those with valid certificates. Limiting SSH login to certificates only, prevents script kiddies from trying to brute-force the server passwords.
I've added an "alias" line to my ~/.tcshrc file, to automate all the complicated keystrokes of opening an SSH pipe, mapping it to the VNC port (VNC port 5900 piped to local port 1200), and then opening a VNC session over that piped port. I specify the ssh port 22 in my alias with the -p option. Port 22 is actually the default SSH port, but on my server, I actually have SSH listening on a differentport, to make my server more obscure to the attackers. Iembed the actual port my server is listening on in the alias line, instead of port 22.
Add to ~/.tcshrc
alias servervnc 'ssh -p 22 -f -L 1202:localhost:5900 \!:1 sleep 10 ; open vnc://localhost:1202'
Then invoke in a terminal session as follows:
$ servervnc [email protected]

How can i management my smtp server?

hello
i install smtp feature but i do not know how can i send mail from my smtp server to my clients
another question why another mail server same like gmail live can send mail to my mail server and how can i see inbox? why needs more configuration for this scenario or not
thanks

For native SMTP setup you might ask them over here.
http://forums.iis.net/1047.aspx/1?Setup
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How can I determine what dns server the wifi client use within airport

How can I determine what dns server the wifi client use within airport
I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
Is there a possibility?
Thanks and happy eastern

The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

How to redeploy Calculation Manager Web Application Server

Hi All,
I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
The readme for the patch can be found at:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031

909062 wrote:
Hi All,
I am installing a patch(13925741) for Calculation Manager, i stuck at the following point:
6. Perform the standard Calculation Manager Web application server deployment task using Hyperion Enterprise Performance Management System Configurator (EPM System Configurator). See the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions.
I don't know how to redeploy Calculation Manager Web Application Server, plz help me in deploying this.
The readme for the patch can be found at:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=15356919#_Toc330987031
Hi,
Did you actually try to look at the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide for instructions as suggested ?
To redeploy a component, run the configurator that can be found in the start menu under Foundation Services. Then select "modify an existing instance". Then for Calculation manager, check the box "Deploy to application server".
Thanks,
JM

How to find solution for avoiding WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product

HI All,
We are using Oc4j version 10g 10.1.3 , and while starting conatiner getting below warning , let me know if anyone have solution for this,.
14/01/10 01:01:29 ********** user-manager (see application/server descriptors) will no longer be supported in the next release of this product!
Please take the appropriate actions to migrate to an alternative strategy! **********
2014-01-10 01:01:29.833 WARNING J2EE SECUR-00100 ********** user-manager (see application/server descriptors) will no longer be supported in the next release
of this product!

I just checked my BIOS and my current setting is set at IDE although it also mentions that the default should be AHCI. Currently I have a dual boot of Windows 7 (need it for Tax software) and Arch
So I guess, when I get the new HDD, I will first set it to AHCI and then install the OSes on it. See if NCQ helps any, and if not I will turn it back and re-install (if I have to). I am planning to have Windows only in virtualbox in the new drive.
Anyhoo, while I was in the BIOS I found two things which I had questions about :
1) Under Onboard Devices --> Integrated NIC , my setting is currently set at "On w/PXE" and it says the default should be just "On". Would it be ok to change it back to On since its a single machine and its not booting an OS on any server. I just don't want to have to re-install anything now since I will be doing that in the new HDD.
2) How would I know whether my BIOS would support a 64 bit OS in Virtualbox? I checked some setting under Virtualization, but they weren't very clear.
I will edit this post and let you know exactly what settings were present under the Virtualization sub-section.

How to register VSPackage into SQL Server Management Studio?

Hi All,
I am a newer to VSPackage, I want to create a VSPackage for SQL Server Management Studio(SSMS), now I can create a VSPackage project and debug it in Visual Studio but don't know how to debug it in SQL Server Management Studio and how to deploy VSPackage to
SSMS by MSI? Thanks

By the way I find a extension.vsixmanifest file and some .pkgdef files under
C:\Program Files\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Extensions\ folder, and they are very similar with VSPackage files. Do know this is useful or not.
Hi Vic Zhang,
After some research, There are some notes. SQL Server Management Studio is built upon the Visual Studio Isolated Shell, which inherently supports extensibility (add-ins/plug-ins). It is possible to tap into the Visual Studio extensibility services to surface
custom capabilities within SQL Server Management Studio; however, we do not discourage this, keep in mind that such extensibility is not supported, so there may be issues with backward/forward compatibility. Microsoft does not publish documentation for extending
SQL Server Management Studio.
If you want to debug VSPackeage about SSMS, I recommend you debug in Visual Studio and not in SSMS, open the project and attach to the process of SSMS.exe, then debug it.
About the issue of finding the “RootKey”, a .pkgdef file is way to encapsulate application configuration information in an easily editable, distributable, and deployable form. And it registers the Extension Manager (which is written as a VS Package). If
you install SQL Server 2012, the .pkgdef of SSMS is located in the following path, you can check the “RootKey” in this .pkgdef file.
C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio
There is detail about a PkgDef, you can review the following article.
http://blogs.msdn.com/b/visualstudio/archive/2009/12/18/what-s-a-pkgdef-and-why.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How do I manage Integrated Web Logic server with JDev?

I need to change admin password on WebLogic Server (for the weblogic admin) and do it from JDev so that start/stop of weblogic server is possible. How do I do it? Continuing, how do I manage WLS from JDev?
Note that I am able to view the application server using view->Application Server Navigator and expand the integrated application server. At this stage, I want I can right click on the application server and launch the admin console. In the authentication tab, the passwords are "grayed" out. I want to reset the password for this weblogic server. The question is how do I do that?
Edited by: 975250 on Dec 5, 2012 2:50 PM

Hi,
There is no way to change password from the JDev configuration.
It should be done directly from WLS.
You can change the password @ WLS side and include the WLS into Jdev.
Here is the following way to change current password.
1.- Take the back of the LDAP folder of the admin server as well as managed server (you may rename those folders) and then delete the actual LDAP folder (found at servers\<MyServer>\data\ldap).
2. Make sure WebLogic instance is down.
3. Set your environment variables using setDomainEnv.sh.
4. cd to security directory in your instance.
(eg: $WL_HOME/user_projects/domains/base_domain/security)
5. Run:
java weblogic.security.utils.AdminAccount admin_user admin_pass .
Remember to change “admin_user” and “admin_pass” to your need.
Also, don’t forget the period “.” at the end of the above command, it is required.
6. After running the command, the file “DefaultAuthenticatorInit.ldift” will get updated.
7. Delete the following file from “ldap” folder:
cd WL_HOME/user_projects/domains/base_domain/servers/AdminServer/data/ldap
rm DefaultAuthenticatormyrealmInit.initialized
8. Go to folder DOMAIN_HOME/servers/AdminServer/security
9. Edit the boot.properties file and change the password to the value already used on step 5. Do this for all the servers in the domain.
10. Start Weblogic Server (Weblogic Server will encrypt the password for you).
Regards,
Kal

How to start Managed server in weblogic10gr3....please help me out...

hi...
How to start Managed server in weblogic10gr3....please help me out...

Hi
You can start Managed server in admin console ->servers
or you can start the managed servers in Independent mode(without admin server)
by using the startManagedWebLogic.cmd/>startManagedWebLogic.sh (this requires weblogic authentication).
Hope this helps
thanks

Windows Server 2008 - How to remotely manage account passwords?

I'm hoping to get direction on how to remotely manage 'user accounts' on Windows Server 2008 machines. The remote management would be from an automated perspective. For example, I have a custom application (maybe C#, Java, etc) that runs on one
server that makes connections to various 'Windows Server 2008' servers; and I want it to be able to do the following.
Query Windows Server 2008 box for full list of user accounts
Update password for user account
Lock account
Unlock account
Check policy information to find out when password may expire
I'm trying to find out what may already be available and running on Windows Server 2008 that I can take advantage to get this done programmatically.
-Wes

I agree with Mekac, the gallery should provide a lot of script of what you want to do.
Like ;
https://gallery.technet.microsoft.com/Password-Expiry-Email-177c3e27 - Password Expiry Email Notification.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

How do I manage open files in Server 2012 without resorting to 3rd party application?

How do I manage open files in Server 2012 without resorting to 3rd party application?
I cannot find the Mange open files in FSRM.
Thanks

Wouldn't it make sense to place it in the server manager / shares section?
I mean, second to creating or finding a share, isn't this what most users would be after?
For like 20 years we've been trained to right click to find stuff Microsoft is hiding, and right click don't do nothin' here. You gotta go hunting under tools. Or, forget the new half-baked interface with half of what you need and go old school,
direct to Start - Computer..Right Click.. whoops... that doesn't exist anymore.....
Drool.........drool.............Find that hiding, blinking start button in a RDP session, click start after three trys, and TYPE IN "Computer Management" . Right Click, Pin it to your desktop, pin it to the start screen, pin it to the taskbar, send
it to OneNote, and upload it to skydrive so you can find it again, then get back to what you were doing....to find the cottin' pickin open files and kick your users off so you can have your way with the server.

How can I manage an older airport express base station with Mountain Lion?

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support."
I tried to install AirPort Utility 5.6 on my Mac OSX 10.8 Mac Book and it will not allow me to. How do I manage my "older" airport?

The 5.6 version can be installed but it does take an alternative route to do so. For example, you can use a utility like Pacifist to first extract the utility, and then, move it to the Utilities folder. Once "installed" by this method, it runs just fine on Mountain Lion.

How to prevent automatic display of "Server Manager" in Win Server 2008 R2

Beginner's question:
How to prevent the automatic loading of "Server Manager" in
Windows Server 2008 R2 ?
Thanks

Task Scheduler|Library|Microsoft|Windows|Server Manager here you can disable or delete the task named
ServerManager.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How do I manage Airport in Server?

Similar Messages

Maybe you are looking for