How do I Manage storage for 10 or more products

My entire family has iPhones and iPads. I'm always running out of storage on iCloud and I have the highest amount. The biggest item I have is keynote and I use that to teach with.

Use iTunes to back up the other devices to your computer instead of the cloud.

Similar Messages

Hi, how do I manage storage? Disk Utility says "other" is taking up most of my storage but I don't know where to find "other". Please help!

Hi, how do I manage storage? Disk Utility says “other” is taking up most of my storage but I don’t know where to find “other". Please help!

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper 2>&-
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

If I go to "manage storage" and get more storage. Is it the same as normal gigabytes?

If I go to "manage storage" and get more storage. Is it the same as normal gigabytes?

Purchasing more Storage on iCloud will not increase the Storage Capacity of your iDevice.

How do I purchase storage for iTunes?

How do I purchase storage for iTunes?

Hi Saffy8,
Have a look here > http://support.apple.com/kb/HT5879
& here > http://support.apple.com/kb/HT4874?viewlocale=en_US
& if you want even better quality > http://support.apple.com/kb/HT5085
& here > http://support.apple.com/kb/HT4914
Best Regards,
mm~

How to obtain the license for the mentioned products.

Hi All,
Please help me in below licensing issues.
1) Our functional team got the below error while accessing "Job Scheduling Workbench".
Error: The Workbench is inaccessible because Oracle Manufacturing Scheduling has not been licensed. Please work with your Account Manger to purchase the license.
2) Another error message while accessing the navigation Flow Manufacturing --> Product Sync --> Flow Routings
Error: APP-BOM 20972: You cannot access this form
Cause: You do not have a license for Oracle Flow Manufacturing.
Action: Obtain a license for Oracle Flow Manufacturing.
Please guide me how to obtain the license for the above products.
Environment: eBS R12.1.3 on Linux 5.8
Regards,
Siva

Thanks for providing the document. I follow the document and get back to you for any issues.
Regards,
Siva.

How to create a Templates for Categories and Products In BCC

Hi All,
Could you please tell me How to create a Templates for Categories and Products In BCC and how Can I get those Templates details(Categories and Products)in jsp
If possible can any one send the document or where we find in atg docs
Regards,

At product/category/sku level there is a property called template.
Find the property in ACC/BCC and provide all the values including the URL property.
In you jsp, you can use this property from product/sku like the way you retrieve any other property from sku/product.
<dsp:valueof param="product.template.URL" />
Using that property with <dsp:include> includes that page.
Peace
Shaik

Bangladesh is not included in "International Store Directory" so how can i order online for an apple product & how can i get it?

I read the 'Shipping Policy' of Apple Store (U.S.). It says "No shipments can be made to PO Box addresses, United States territories, or addresses outside of the United States. Bangladesh is not included in "International Store Directory" section, so how can i order online for an apple product & get it?
If its possible for me to buy apple products through ordering online lets just say an iPhone4 and an iPod Classic then how much it will cost separately for each one in total?

The iPhone is not available for legitimate sale in Bangladesh. There are no supported carriers in Bangladesh. If you can purchased an unlocked iPhone in a neighboring country, you should be able to use it with any compatible carrier, but warranty service and support will not be available to you outside the country of origin.

Trying to cancel subscription. I get to the manage link for service or product for which I want to cancel the subscription. There's no Renewal Status field. Please help

Trying to cancel subscription. I get to the manage link for service or product for which I want to cancel the subscription. There's no Renewal Status field. Please help

Hi elizabetht49548035,
I see that you have an Acrobat Pro subscription. To cancel that, please Contact Customer Care. Choose Acrobat from the top drop-down menu, and then choose Membership, Account, and Payment. Click the blue "Still Need Help?" button at the bottom of the page to find both phone and chat options.
Best,
Sara

How do you sign up for the MORE program and get the 50MG for free?

I was told that if you signed up for the MORE - Cloud program you will get 50mg for Free? I didn't receive that. Anyone know how that works?

Hello skyles!
I have great news! If you have the More Everything plan, you get 25GBs of cloud storage. That's a bunch more room than 50MBs! Here's a link to check it out: http://vz.to/1eTSQHd
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport

How do I manage storage on the iPad?

Hi, I have a 30 gb iPad and have 4gb left. The largest thing on my iPad is 2.6 gb of iBooks data. But the rest adds up to 2.673 gb of data. So that leaves me a total storage area of 9.2 gb (5.2 used + 4 free). How do I figure out what is eating up the rest of my storage? I'm getting my storage numbers from "General > Storage > Manage Storage".
I'm thinking either the iOS takes up must take up 10 gb of data in and of its self. Then the rest of the applications (their physical installed size) are using the rest of that? Or that services being synced from iCloud (mail, contacts and calendars) are eating up memory.
Any assistance is greatly appreciated. I want to just wipe my iPad and see if that frees up data but don't want to lose my Minecraft data (it isn't backed up to anywhere I believe).
FYI, under storage it says I have used 22.4 gb and 4gb is available.
Thank you for anyone that has figured out the magic bullet on managing storage on the iPad and can share!

Found the answer. I backed up my iPad, wiped all the data, and then restored from back-up. Now I have 22.27 gb available to use. It was listed under "other" on my mac. :-/

How to Separate Management Servers for Ease of Administration?

Hello,
I am fairly new to SCOM, though have been charged with creating a monitoring solution for a particular group of customers and integrating it as far as possible into our existing corporate SCOM implementation, so any help, tips and so on would be greatly
appreciated.
The customer monitoring requirements will be very different to those of our fairly standard corporate environment - we will need to monitor very different technologies, with some systems sat in different domains or a DMZ. Our central servicedesk will still
need to monitor and action alerts and events for both environments as seamlessly as possible.
At the same time, I would like to separate the environments as the configuration of the management servers for the customer environment will be quite different from our corporate one, and I want to avoid having to make changes to all our corporate servers
every time I need to change something on the customer environment - so things like management pack installs, certificate admin, static DNS config and so on.
How would I go about this please? Would it be better to create a separate management group, with servers dedicated to the customer environment, then connect this to the corporate management group so that the servicedesk can still monitor it, or is there
another way of doing it? Perhaps using resource pools? Time will be a factor here, though ultimately the goal is ease of administration going forward.
Thanks

Using resource pools will not allow you to separate configuration such as MP installs, security, etc. as they are all part of the same management group. From Technet, "A resource pool is a collection of management servers used to distribute
work amongst themselves and take over work from a failed member." If configuration needs to be completely separate from the base configuration perspective, you could use separate connected management groups.
Another option is to separate the configuration within the management group. For example, if you need to monitor SQL computers in your corp environment but not the customer environment, simply create a group containing customer computers and override
the SQL discovery. This applies to other technologies as well. You can even group computers by environment (corp/customer) by using reg key attributes like Kevin Holman describes here: (While my account is being verified
I can't post links but you can search "Creating custom dynamic computer groups based on registry keys on agents"). If you are familiar with MP authoring, you could create a new MP with a new Windows Computer based class instead of extending
the Windows Computer class. From a capabilities perspective, you can certainly monitor corporate, customer, DMZ, and other domains in the same management group. If the domain is untrusted or in the case of the DMZ, workgroups computers, you can
utilize gateway servers with certificate authentication which will be configured for each domain/dmz gateway.
Ease of administration is a tricky concept here...if you utilize separate management groups, administration will have to be handled completely separate in 2 separate consoles. If there are separate SCOM admins per management group, this is
of no issue, but if 1 team/person is managing both, this can be difficult. Alternatively, there will be some up front work to using groups to separate the environments using groups, discoveries, etc.

How is solution manager useful for performance monitoring

Hi,
I want to check expensive sql statements in production and quality systems.How can solution manager be useful for this.
It would be great if anyone can provide me some documentation on this

Hi,
In Solution Manager, there is an Early Watch Analysis report which is generated and which has section in the report ' Performance Indicator' in that section you will get 2 things :
1. Top 10 Transaction codes which has huge response times.
2. Top 10 program which has huge response times.
and after that you also get the list of expensive SQL statement in the report and then you can just optimize the queries and improve system performance.
Regards,
Harsh

How do I create storage for ios7

Not very tech minded. Telling me not enough storage for the ios7. How do I create more

Delete songs, videos, messages - whatever is taking up data.
Have a good backup and copies so you can restore what you
take off to make room.
If you do the update by connecting the iPhone to the computer
you usually sync with and use iTunes on that computer to do the
update. You will need less free room on the iPhone using this
method that doing an over the air update using just the iPhone.

How can you find patches for a specific product?

Unless you have a patch number, it is a pain to try and find the latest patch for a particular product. In fact, it is a pain to find a product unless you have the name:))
1. If you do not have the product name, but know the function/purpose, what is the best way to find the Sun product? For example, I want to start using SNMP. That is all the info I have. Is it possible to find the package name and required patches using the Sun site?
The patchfinder is great if you have a starting number:))
Thanks,
Zeek

The bi weekly patch reports are generally a good start.
Do some keyword searches in those pages.

How do I Manage media for QTSS without QTSS Publisher?

Mac OS X Server Server Administration For Version 10.5 Leopard
p. 49 says:
“Media Streaming Management
QuickTime Streaming and Broadcasting Administration provides instructions for
administering QuickTime Streaming Server (QTSS) using Server Admin.
QuickTime Streaming and Broadcasting Administration also describes QTSS Publisher, an
easy-to-use application for managing media and preparing it for streaming or
progressive download.”
But the manual QuickTime Streaming and Broadcasting Administration For Version 10.5 Leopard
Has no reference whatsoever to “QTSS Publisher” or “Publish”
And the Migrating from Mac OS X Server v10.3 manual
Says on p. 69:
QTSS Publisher Files and Folders
QTSS Publisher has been removed from Mac OS X Server v10.5. However, files created
using QTSS Publisher on v10.4 should continue to work on v10.5.
What gives?
How do I migrate and then upload and manage my QTSS files now? The manuals are vague!

Hi Tom,
I did this last night (literally). Here is what you need to do. I am working under the premise that your current server is a Tiger server. If this is not the case, then you may have to adapt the Tiger server locations I am providing to your version of server.
If you have not tweaked Apple's configuration in any way, your current streaming media files are located in /Library/QuickTimeStreaming/Movies on the Tiger server. You will need to copy these files to the same location on the Leopard server. Next, you will need to set the permissions and ownership of the files you just copied. If you execute the +ls -l+ command from /Library/QuickTimeStreaming/Movies, you will find that the permissions for the stock sample files are -rw-rw-r--, and that the owner:group is +_qtss admin+. So to change your files to match these parameters, execute (as sudo) the chmod command +chmod 644 <filename>+ as well as the chown command +chown _qtss:admin <filename>+. Now when you execute +ls -l+, you should find that the owner, group, and permissions for all the files are the same.
Once that is done, the rest is fairly straightforward per Apple's documentation. One thing I will say, as this burned me last night, is that if you change IPs, and you are also using the Web server component, things will get a bit funky. The files themselves will be fine, but QTSS will become unbound from whatever IP it was set to originally, and Web server will prevent it from starting. You'll have to re-bind QTSS to the appropriate IP (if your server is multihomed), re-enable streaming on port 80 if necessary, start QTSS, then start the Web server.
Good luck! Hopefully through my suffering you will suffer less.

How do I Manage storage for 10 or more products

Similar Messages

Maybe you are looking for