How do I managed audio preferences for lab machines?

I am unable to get an audio preference to be a the default configuration for all users, local or network. I've created a user template that has all other configurations and preferences and this works great except for audio I/O. All lab machines have identical firewire audio input devices and identical usb prowered speakers for an output. Using the Audio/Midi utility I set the input to the firewire micpre, output to the usb speakers and set alert sounds to the internal speaker.
When other users log in all three settings default to the firewire device.

Turns out to be a OS bug. I am told that a script can be written to establish the configuration.

Similar Messages

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
 '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
 $listItems = $list.GetItems($query)
 $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
 foreach($item in $listItems)
 #Cast to SPListItem to avoid ambiguous overload error
 $spItem = [Microsoft.SharePoint.SPListItem]$item;
 Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

How do I restore printer preferences from time machine in Mountain Lion?

Yesterday I deleted all the printers and and after reinstalling the printer drivers from the printer disc, the printer cannot find the software, so how do retore the printer preferences from time machine?

The printer is a Samsung CLX-3180 series. I have downloaded the printer drivers from Apple:
Samsung Printer Drivers v2.5 for OS X
Then when I go into System preferences to Add the Samsung printer, I get the following message:
"Can't install the software for the Samsung CLX-3180 Series because it is not currently available from the Software Update server." Which I don't understand as i have downloaded the new drivers and the CLX-3180 is listed as a covered printer.

How do I set Premiere preferences for all users - University lab machine?

I am setting up an editing suite for our University which has a "per machine" Creative Cloud licence. It is a PC installation. This machine will be used by a class of students who will log in with their own credentials. I need to set the preferences for Premiere (video output, workspace layout, default drives etc) so that it will be the same for all users logging in since we want a consistent setup for teaching purposes and dont want to have to help each student set up so that it shows correctly on the monitors. Is there a way of saving this setting as the default for every user?
The most important one is the preferences - Playback in order to set up the second monitor.
Message was edited by: Bruce Cooke

Hopefully you did manage to do it.
Reading this should be enough Adobe Premiere Pro Help | Preferences

How can I manage new Firefox for Mac on my network. Control users Home Pages for Mobile User Accounts.

I am running Mac Computers in a School. Current Mountain Lions OS and current Firefox Browser. We log in using mobile accounts. How can we manage Firefox so all users get the same home page and settings.
If I can do locally or through a profile, that would be great

hello, you could use the mozilla.cfg file in the firefox program folder in order to lock or set certain preferences - here is some general information on how to set that up: http://kb.mozillazine.org/Locking_preferences
and specific guide to set the homepage can be found here: http://mike.kaply.com/2012/08/29/setting-the-default-firefox-homepage-with-autoconfig/ (this blog also contains may other helpful resources for deploying firefox)

How can I manage multiple iPads for different students?

Problem: I need to manage multiple iPads for my students with special needs. I need to download different apps to different iPads and I'm not sure how to keep their apps separate but still keep ultimate control of the units (i.e. lock them from loading anything on the apps that we at the school district haven't approved).
I need to be the only one doing updates, loading software, etc., and don't want to keep using my own personal iTunes account...any suggestions?

If the presenter is using a computer and everyone else has an iPad this is very easy and free. Just use http://join.me and on the iPad just download their free app

How to set default audio device for java apps on Linux?

I would like to find a way to choose a particular (ALSA) audio device for java applications. How can this be done without reprogramming the application or changing the default ALSA device? I came across "sound.properties", but could not find any information how to use this file on an ALSA system.
Thanks for any help, Mark

Eugenia wrote:Well, it's still not good enough.
We can't satisfy everyone. What you want is a corner case. For most people ALSA and dmix works appropriately, and that is what esd uses by default. We cannot document and automate every configuration possible. That's up to the users.
However, if you don't want to restart gnome, try the below... I make a few assumptions, but even if they're wrong, they're hardly difficult to work around.
Just copy the /etc/esd.conf to ~/.esd.conf, make your change, then do killall esd. Presumably gnome will restart esd, and it ought to read your local config. If it doesnt, start it yourself.
Feel free to write a script that automates this, or document it on the wiki.
I have to restart Gnome to get this thing working. Other OSes *automatically* can use an alternative device. But if I change ESD, I will have to restart Gnome, no?
Well, if you try my suggestion above, no. You can restart esd yourself. And that's what all the other distros do, except with some fancy GUI.
James

How to change default audio device for gnome?

My laptop has an integrated sound card, but I lately got a USB headset (headphones+mic, which works with linux btw, I tested it with GizmoProject which lets me choose which /dev/dspXX I want): http://www.geeks.com/details.asp?invtid=U200&cpc=SCH
So, how do I change the default audio device for *all* desktop sounds to the headphones? I tried the two gnome sound properties, and when I select the headset device they let me configure it but ALSA still uses the internal audio card. Why isn't there a way to easily select which device you want for your sounds as there is for BeOS, Windows and OSX?

Eugenia wrote:Well, it's still not good enough.
We can't satisfy everyone. What you want is a corner case. For most people ALSA and dmix works appropriately, and that is what esd uses by default. We cannot document and automate every configuration possible. That's up to the users.
However, if you don't want to restart gnome, try the below... I make a few assumptions, but even if they're wrong, they're hardly difficult to work around.
Just copy the /etc/esd.conf to ~/.esd.conf, make your change, then do killall esd. Presumably gnome will restart esd, and it ought to read your local config. If it doesnt, start it yourself.
Feel free to write a script that automates this, or document it on the wiki.
I have to restart Gnome to get this thing working. Other OSes *automatically* can use an alternative device. But if I change ESD, I will have to restart Gnome, no?
Well, if you try my suggestion above, no. You can restart esd yourself. And that's what all the other distros do, except with some fancy GUI.
James

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

How do I Label Audio Streams for Playback

I am working on a DVD with 2 audio streams and the client would like when toggling from one stream to the next for them to be labeled on the DVD player "5.1" or "2.0". I know I have seen it on retail DVD's. Currently it just reads 1 or 2. How do I change it so it reads "5.1" or "2.0"? Is this a scripting thing? Scripting is the one thing that I am really having a hard time grasping and understanding unfortunately even with tutorials. Any help, info, or tutorials are greatly appreciated. Thanks.

If you mean labelled on the text display screen on the front of the DVD player hardware, then this isn't something you can control from the disc. It is a feature of the player itself.
If you want to show the audio choice on the TV screen as the disc plays back (i.e. within a menu where you make an audio stream choice) then that's different - it is possible to do this.
If you want to change the audio stream using the remote handset and show the change in audio stream dynamically at any time on the TV screen as the disc is playing, then that is also not possible.

How to create an audio role for any library in FCPX

Does anyone know if there is a way to create an audio role in one library and have it as a saved preference that you can use in any library?
Or do you have to re-create the roles for every library?
Any help is appreciated!
Thanks!
Adrian

Looks like this has been resolved in the latest update of FCPX 10.2

I am in Thailand and the US version I downloaded has Thai script interface - how to change ? The preference for general agent locale is already set to US Enlish

I downloaded the US version in Thai and the interface is in Thai script - I checked the general agent locale and it is set to English US. How do I get an interface I can read ?
== This happened ==
Every time Firefox opened
== I downloaded the US version in Thailand

See:
*https://support.mozilla.org/kb/change-firefox-behavior-when-open-file
*http://kb.mozillazine.org/File_types_and_download_actions
Current Firefox versions remember the download directory based upon the URL, so if the URL changes then the default folder may be chosen if there hasn't been selected a download folder before for that server.
You can disable this feature to remember the download directory via the Boolean pref browser.download.lastDir.savePerSite on the about:config page.
The browser.download.lastDir.savePerSite pref doesn't exist by default (it is a hidden pref), so you need to create it.
Create a new Boolean pref with the name browser.download.lastDir.savePerSite and set the value to false.
* http://kb.mozillazine.org/about:config
You can delete the content-prefs.sqlite file in the Profile Folder to only remove settings stored in this file and keep the exceptions that are stored in permissions.sqlite that would be lost if you clear the "Site Preferences" via Clear Recent History.

How do I change audio mapping for a clip being batched in from a sequence?

My client has cut a shorter version a feature film for his client. The client's source is a Hi-Def tape with four channels of audio. Ch.1&2 Stereo Mix and Ch.3&4 Music & Effects. He was given a DV tape with Ch.1 Mono Mix and Ch.2 Music & Effects.
When I recapture his timeline in Hi-Def, how do I tell FCP to grab all four channels and put them in the places that I want?
Thanks,
Dan J.

He was given a DV tape with Ch.1 Mono Mix and Ch.2 Music & Effects.<<</div>
If he's given you a tape with only two channels (48khz, 16bit), you'll only have two channels. If the tape was recorded in a device that allows for 4 audio channels (32khz, 12 bit), then you'll need to capture channels 3 and 4 during another capture.
-DH

How can I manage audio output power save time?

I need to make spdif-audio out always ON, that's needed for my external DAC which is synced on the signal correctly. However, the system mute audio out in about one minute of silence. How can I avoid this power save and keep sync signal always ON, or, at least, increase power save time up to 10-15 minutes?
Thanks!

You may be able to do what you want with Rogue Amoeba's Airfoil for Mac.
Best of luck.

How do I managed audio preferences for lab machines?

Similar Messages

Maybe you are looking for