How do I mark and play audio clips simultaneously without stopping playback in the source window?

I do a lot of editing to music and I liked the function of being able to mark audio clips by tapping M while the song was playing. I was able to do this in CS4. When I upgraded to CS6 qnd I pressed the m key it would leave a marker but stop playback. Any idea how to customize this would be greatly appreciated.

Open the file from the Project Window.

Similar Messages

  • How to split video and extracted audio clip at same time?

    I imported 10 min of DV from my Sony HC96 camcorder to iMovie 6.
    I selected a video clip and split it using cmd-T but the extracted audio clip below it did not split. How can I split both the video and underlying audio clip so I can drag the edge of the new video clip for editing by direct trimming and keep the audio dialogue in sync. I have already gotten the clip volume levels right in the extracted audio.
    This seems pretty basic editing but I must be missing something.
    thanks, ralph
    1.67 GHz 17" PB, PowerMac Dual 2.5 & 23" Cinema Display   Mac OS X (10.4.8)   Airport Extreme Base Station and Airport Express

    Thanks, Sue. Let me see that I have this right. I split the video then the audio. I then selected and trimmed the video to the remove the 10-15 seconds I wanted to remove. To keep the dialogue in sync with the speaker's lips, I then selected and trimmed the audio to the same time as I trimmed the video. Then I dragged the audio clip back up to the new start of the trimmed video clip. I did this and the dialogue and lips seem to be in sync.
    I guess originally I had looked for a solution where I cut both clips at the same time and trimming one trimmed the other. But now I see I just need to do them separately. Thanks for the help, Sue!
    ralph
    Hi Ralph:
    You can't do both at the same time, but you can do
    them one right after the other. Highlight the audio
    and split it after you split the video and be sure to
    keep the playhead in the same position.
    Sue
    1.67 GHz 17" PB, PowerMac Dual 2.5 & 23" Cinema Display   Mac OS X (10.4.8)   Airport Extreme Base Station and Airport Express

  • Quicktime and Playing Audio CDs - Why Can't I Select the Whole CD to Play?

    I unfortunately agreed to update my Quicktime software when prompted by Apple. Since then, when I try to play audio CDs while working on my Mac, I have to select one song at a time and then select "play" in order to hear it. Now, only 48 hours ago, all I had to do was double click on the audio CD and the whole thing would play with no problem. This is why I am so wary of this so-called "convenient" and "user friendly" update alerts because you never know what the update actually contains and how it is going to change the behavior of your computer!
    Anyone out there in the Mac community know how to fix this problem?

    Anyone out there in the Mac community know how to fix this problem?
    Would assume most people now use iTunes to import/convert audio files for playback/storage on their computer/iPod and/or burning of custom MP3 CDs which hold on the order of 10 times as much music and are compatible with most current generation CD/DVD players.

  • When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

    Does it not play at all or cannot you get the audio in the timeline?
    Did you copy the entire card to the hdd and then imported the file via the Media Browser?
    Did you source patch the audio tracks?

  • Can anybody explain me how to sample and play audio files with logic's EXS2

    can anybody explain me how to sample and play audio files with logic's EXS24 Sampler???
    i cant find a way to upload and manage my own audio content on this sampler...

    i uderstand , thanx...
    i managed to open an audio file and placed it in the sampler,i can play t sample in the little keyboard in the zones section, howver i dont know how to play it with my controller... the sample shows in C1 on logic's keyboard but if i play C1 on my controller nothing happens... how can i fix this?
    Also, i noticed the sample plays from beginning to end once i click on it, how do i do to just make it last until i release the key? like a logic sound??? (in case i want to play a small portion of the sample only)
    Thanx

  • How can I code to play audio continuously from page to page in iBooks for reflow ePub

    Hi,
    I have tried and successfully completed the iBooks ambient soundtrack option in Fixed Layout ePub. It works fine.
    But while trying the same in Reflow ePub, it is not working in iPad iBooks. I have latest iBooks version and latest iOS version in my iPad.
    Please let me know how can I code to play audio continuously from page to page in iBooks for reflow ePub?
    Thanks,
    Sundaram

    As soon as the user turns to the next page, the audio stops.
    That's how it works in all cases.
    the book is a read aloud book.
    See the 'How-To Read Aloud' section in iBA Tips and Tricks 01

  • How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

    Hello,
    The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5.  I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top.  The closest that I got was to nest the sequence, but that's not what I really want.
    I'd like to merge all the short clips into one single (long) audio file to use under the video.
    Thoughts are welcome and  greatly appreciated.
    Thanks,
    -Melvin

    O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
    Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
    Go to the File Menu> Export Media
    You will be given all the Export Options.  Choose Wave File
    Select option for Export Work Area.
    Choose where to export the file to ( HD location)
    follow your nose from there....
    http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
    BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

  • How to cut unwanted section of audio clip in iMovie 09.

    I had some problem removing section of audio clip that are too long for the movie. I finally found out how to do it. Here's how. Hope this will help others.
    1.Using the playhead, find the area in which you want to cut the audio and place the playhead there.
    2.Click on Edit - Split Selected Audio Clip at Playhead. This will automatically split the audio clip into two separate clips. Continue to do this until you create a segment that you wish to use.
    3.Delete the extraneous segments by clicking on them and pressing delete.

    Do you really have iMovie 08? I could give you the answer for iMovie 11 and FCP X, but if you are on iMovie 08, I assume you are backlevel on FCP as well?

  • How do I send a single audio clip to STP without sending master clip too?

    Hi there,
    I'm trying to clean up production sound in STP using a roundtrip from FCP. When I send a single audio clip to STP as an Audio File Project, the entire master clip is sent (which is as long as the tape.) I thought I'd only be sending the part I had edited into the FCP sequence. Also, in STP there are now left and right audio files (from the original master clip). I only wanted to adjust the sound on one track, not both.
    How do I send just a single clip from a single track from the FCP timeline to STP? Should I be sending as an Audio File or Multitrack Project?
    Does it matter if the clip was edited into the sequence from a subclip (rather than from a master clip)?
    Thanks so much. Any help is appreciated!

    If you are planning to edit your sound in Soundtrack Pro, you do a log & capture in FCP not Capture Now. Like FCP Soundtrack Pro brings in the whole file from Media Start to Media End. To nondestructively edit it needs the while file residing on your scratch disk. That's why you log & capture each take unless you're doing something quick & dirty.
    If you are working on a documentary & you have 50 plus hrs. of footage it may be too time consuming to log all the individual clips. As an alternative you could do Capture Now & then subclip, export your subclips after renaming them, as a batch list. Dump the original capture file, import the batch list & do a batch capture of the offline clips. Now you have the media in a sensible form that Soundtrack can work with. It's still going to bring the media in from Media Start to Media End but now each of the media starts to ends are a fraction of their original size.
    Dave

  • How can I tell if an audio clip is .m4a or .aiff?

    I have some audio clips in a song that I dragged/dropped a few weeks ago and I cannot remember if they were rendered as m4a or aiff. I tried clicking on the clip itself but I see no option for "get info" or anything like that. I also tried using the finder which does tell you, but unfortunately I used the same title about ten other times so that won't work in this case.

    Did you try my suggestion?
    WH
    Yes, and it presents the same dilemma as the finder option since I have multiple files with the exact same title. Example: My song has an audio clip titled "Leah" because that is the name of the girl I recorded on that track. Unfortunately I used that title six different times. So if I use Finder or your suggestion, I type in "Leah", and it gives me all 5 files, all the exact same music and duration and I have no idea which one is the one being used in my song.The only way to know for sure is to do this from within GB, and I cannot believe there isn't an option for this. Thanks for offering to help though.

  • I have a docking station to charge and play audio from my ipod touch 3rd gen.  Just bought a new ipod touch 5 th gen.  Is there a converter/ adapter available so I can continue to use my dock?

    I have a docking station to charge and play audio from my ipod touch 3rd gen.  Is there an adapter available for the ipod touch 5th gen so that I can keep using the old dock?

    Lightning  Adopters
    One of these adopters/cables should work:
    http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

  • How do I save and play an asx.asf file?

    How do I save and play an asx.asf file?

    Those are Windows formats.
    VLC should be able to work with them as stated at http://www.iskysoft.com/article/asf-video-converter-mac.html
    Allan

  • HT1379 I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    I have  lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.

    Welcome to the Apple Support Communities
    Lion uses Recovery to reinstall OS X. Press Command and R keys when your Mac starts, open Disk Utility, erase the drive and reinstall Lion. The other Mac has probably got its hard disk damaged, so take the Mac to an Apple Store

  • Recording and playing Audio at the same time

    Hi,
    Having problem with a MMAPI imp.
    The simplest way of doing it is to start one thread playing a audio file of any kind.. As it is playing start a other thread that start a audio recording.
    As soon as the audio recording is allowed to record (Security promt) the audio playback stops. And the playerListstner sends a END_OF_MEDIA event.
    So my question is: Is there a way of doing playback and recording at the same time or is this a limit on the phone or the MMAPI?
    This has been tested on Nokia N90 and SE W550i with same reults
    Cheers
    Kenth

    i also desperately need to record and play audio at the same time.. i have a term project, i am develeoping a karaoke player in j2me and it is supposed to capture the voice at the same time background song is played.. and it is also supposed to grade the singer according to the pitch of voice.. please help me about recording and playing audio at the same time...

  • How do I shuffle and play a genre on iphone

    When I select a genre, I do not have the option of shuffling or playing. It list the albums, and it is not until I click on an album, do I have the option of shuffling and playing. I ipod used to play shuffle and play genre. Any ideas? Thanks

    I think the only type of suffling that can be done is:
    Genre> all Albums> All Songs > click on song title > click shuffle button (ios 6)
    For "all songs" you may need to scroll up.

Maybe you are looking for

  • Paste function no longer works for me.

    I have only noticed in the past couple of days that the 'paste' function when I right-click no longer works, it's greyed out. I can copy no problem but when it comes to pasting it, I can't get it to work. I have tried 'ctrl+v', that doesn't work for

  • Iphoto not found in the bundled iBook G4 software

    My hard drive broke and was replaced by Apple. They told me I would have to reinstall all the bundled software. The new hard drive came with 10.4.8 installed. iLife was not included, though it was when I bought the computer in '05. So I reinstalled (

  • Once again: prints too dark after upgrading CS3 to CS5

    Hi, I know this has been discussed before, but I haven't found a solution to my issue in the existing threads. I am most likely missing something obvious, and perhpas someone here can point it out to me. I recently upgraded from CS3 to CS5. In both e

  • Showing diff. result against 1 Billing document number

    Hi, I have a query in the report....that.. When i execute it, with the Billing Document number, it shows excise value some i.e. (5,500.00).. When i execute it, with the Billing Document date (here not insert Billing Doc. Number), after all records sh

  • Jdk1.3+ support in J2ME

    Hi, Can somebody tell me if j2ME supports all classes written using JDk1.3 and JDK1.4? I mean if we write some java classes using Jdk1.3 will they run seamlessly on a PDA or mobile device that supports the latest version of J2ME? (By seamlessly i mea