How do i meet a client?
am new here and i need a pal
Why do you need to identify the client? Do you need to hold some conversational state between calls? If so then just use stateful session beans. However if you just need the identity for auditing purposes then having multiple clients with the same credentials seems like bad design to me. If several clients use the same user, your system shouldn't have to care how to distinguish them. They are the same. However if you want several users with their own identities and the same rights, add them to the same role, but create separate credentials for them.
The only object holding data about the logged in user will be the Principal which I guess you already found in the SessionContext. (SessionContext#getCallerPrincipal()) Since some ejbs are stateless I don't understand why you would expect them to have some sort of session mechanism going on during the calls.
Zsom
Similar Messages
-
How to run expdp from client ?
Hi All,
I tried searching google and forums for my issue but to no avail > How to run expdp from client side ....like in my laptop.
Because currently our PROD database server has no space for expdp dump file. So I want it directed to my laptop which has an extenal USB of 1TB harddisk...via client EXPDP
import data using impdp command
Posted on: 08-May-2012 11:36, by user: 841731 -- Relevance: 53% -- Show all results within this thread
below command is correct or not? if it is not correct could you please send me the correct command. impdp user/pass@databasename schemas=sourceschemaname remap_schema=sourceschemaname:destinationschemaname ...
System generated Index names different on target database after expdp/impdp
Posted on: 30-May-2012 11:58, by user: 895124 -- Relevance: 43% -- Show all results within this thread
After performing expdp/impdp to move data from one database (A) to another (B), the system name generated indexes has different ...
[ETL] TTS vs expdp/impdp vs ctas (dblink
Posted on: 08-May-2012 21:10, by user: 869578 -- Relevance: 39% -- Show all results within this thread
(table : 500 giga, index : 500 giga), how much faster is TTS (transportable tablespace) over expdp/impdp, and over ctas (dblink) ? As you know, the speed of etl depends on the hardware capacity. (io ...
Oracle Client
Posted on: 21-Jun-2012 22:47, by user: Sh**** -- Relevance: 32% -- Show all results within this thread
Hi Guys, Please can you guys elaborate the difference between Oracle Client and Oracle Instant Client. Also, please can you advise from where I can download the Oracle normal ...
Oracle 10g Client
Posted on: 05-Jun-2012 10:11, by user: dzm -- Relevance: 26% -- Show all results within this thread
to search at oracle site and this forum, but i wasn't able to find a link to download the oracle 10g client. I really need especificaly the 10g version. Anybody know the link or another way to download ...
9i client to access 11g database
Posted on: 22-Jun-2012 07:31, by user: kkrm333 -- Relevance: 24% -- Show all results within this thread
Hi, Can i access a 11g database using 9i client? Thanks,
SQLplus in Oracle Client
Posted on: 14-Jun-2012 00:36, by user: Tim B. -- Relevance: 24% -- Show all results within this thread
Hi, I tried to install an 11g oracle client in linux. As I've compared the files with the files when you install using the oracle instant ...
Re: Information on Oracle Client 11202-1.1.4-6
Posted on: 05-Jun-2012 03:33, by user: 898763 -- Relevance: 23% -- Show all results within this thread
Actually thats the client requirement
Analysing the performance of a single client
Posted on: 28-Mar-2012 02:05, by user: 880172 -- Relevance: 23% -- Show all results within this thread
timeouts even on some of the simplest queries. I want to try and get some data about how just this one client is performing and what it’s doing, but everything Google has thrown up so far is orientated around ...
to make client connection as sys
Posted on: 12-Jun-2012 22:04, by user: user11221081 -- Relevance: 23% -- Show all results within this thread
Dear gurus can i connect to my server from my client machine with sysdba without giving sys password i have connected in different ways as sys@abc ...Thanks a lot.Though you can initiate the binary from your client side but for the file creation, there is no other way but to store it on the server side. So your best bet would be to get some space free on the server side of yours.
Aman.... -
How to send meeting invites using Exchange Email Account
Does anybody know how to send meeting invitations using the 3.0 software update?
My corporate email is set up with an Exchange ActiveSync account, but I can't figure out how to send meeting invites?
Is it a function solely of the iPhone 3.0 OS, or is it dependent on the Exchange setup.
Any insight would be appreciated.
DavidThat is what I was afraid of...the good thing is that is the only feature (besides battery life) that I miss from my Blackberry. Thanks.
-
I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelãoplease disregard this answer.
Message was edited by: Marcelão -
How to upgrade the Oracle Client silently ?
Hi all,
I have to upgrade the Oracle Client from 8.1.6.0.0 to 9.2.0.1.0.
I use the -record option for creating the destination file or edit the response file manually for being able to install the new client. But I have no idea, how to remove the old client.
The following command doesn't work:
C:\Program Files\Oracle\oui\install\setup.exe" -deinstall DEINSTALL_LIST={"oracle.client","8.1.6.0.0"}
What am I doing wrong? How to remove the Oracle Client silently?
Thanks for the help and best wishes from Frankfurt.
DimitriI created a instant client silent DE-INSTALL for version 10.1.0.2 on XP.
setup.exe -silent -deinstall -responseFile Z:\yyyyyy\xxxxxx.rsp
These are parameters are in my response file...
ORACLE_HOME="C:\oracle\InstantClient\10.1.0"
ORACLE_HOME_NAME="OraInstantClient10g_home1"
TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=true
REMOVE_HOMES={"c:\oracle\ora81","c:\oracle\InstantClient\10.1.0"}
You still have to manually update/remove the PATH & TNS_ADMIN environment variables and the file system directories. -
How to get the loaded client sequence file path/name?
I added a step in Process model, and wanted to get currently loaded client sequence file name/path. I used the variable of "SequenceFile.Path" but then I realized what I would get is the process model file path, not loaded client sequence file path/name. How can I get loaded client sequence file path/name?
Thanks!
JackyI dont understand what you are trying to achieve. Can you provide more information.
If you are trying to dynamically load and run a client sequence file at run time you need to make a couple of calls to the TS API from inside the process model, Engine.GetSequenceFileEx to get a reference to your sequence identified by its pathname, and then Execution.ClientFile to tell the process model which sequence you want to run.
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't. -
How to use remote desktop client in mountain lion
How to use remote desktop client in mountain lion.
I want to connect my other system(ubuntu) using mac remote desktop client, But i could not locate remote desktop client in moutain lion.In Ubuntu 12.xx use Dash to find "Desktop Sharing" and set the preferences, including requiring a password.
Then in Ubu use System Settings > Network to determine your Ubu machine's IP address, such as 192.168.1.13.
On the Mountain Lion Mac do Finder > Go > Connect to Server and enter: vnc://192.168.1.13 or whatever your IP is. Enter the password that you used in the Ubu Desktop Sharing setup, when asked.
On the Ubu machine answer the question that pops up asking for permission to connect. Your Ubu screen will now show up on the Mac, and you can remote control it. Here I am running "Octave" (a math program) on the Ubu machine, remotely.
Works great! BTW, you can do this from an iPad too, using a VNC client such as Mocha VNC Lite. You can even run both remotes simultaneously.
Good luck. -
Documentation on How to Develop an OPC Client Using LabWindows/CVI?
What documentation is there on how to develop an OPC client application using LabWindows/CVI? What tutorials, if any, are there? What reference manuals, if any are there?
I am completely new to LabWindows/CVI. I will be starting soon with the tutorial, "Getting Started with LabWindows/CVI". However, our application needs to communicate with an RSLinx OPC Server. Any documentaiton on how to learn to do this would be very much appreciated.http://www.ni.com/white-paper/4626/en/ Just did a quick google and this came up, Labwindows CVI and Labview are quite different but I usually look at Labview examples then try take the general idea from the example and apply it in CVI, hope this helps
-
Changed IP address, how do I update the clients
I've poked around but all I can find is info about how to change the IP address of a TC without additional information about what to do with existing clients.
I'm not using a TC in this case (NAS frontended by a Mini providing AFP accesss), but I figured this would be the best place to ask.
I set up TimeMachine on most of our Macs (all 10.7 and 10.8) a few weeks ago, but just had to reconfigure my network which neccesitated changing the IP address of the host that provides the TM remote disks.
How do I tell the clients to start using the new address of the server? Will just adding a new disk do the right thing (I haven't tried as I don't want it to clobber what already exists).
Thanks.Yes, you have to change the setup in each computer to redirect it to the new location of the backup disk..
You can do a TM reset.. but that should not actually be necessary.
See A4 here. http://pondini.org/TM/Troubleshooting.html
But TM is smart enough that when it finds the disk.. it will then find its previous backups and continue the backup .. after suitable verification. You can change the computer name. Change the disk name. Change the backup sparsebundle name.. TM will still find it and continue to use it. And even if there are multiple sparsebundles or disks with the same name or even computers with the same name.. which would break network rules,, but TM still won't get confused.
Again read up a bit of how TM works its magic.
http://pondini.org/TM/Works.html
The UUID is picked up from source hard disk I guess.. and that is what is used. This ensures everything is kept separate from names or even IP address. -
How to access Hyper-V Client from Hyper-V Server to the new machines?
Hi
We have a small company in that we have 50 machines, i am having windows 2012 r2 server, i installed Hyper-V with that i have created virtual OS(winxp and win7) in the Hyper-V server. My question is how to access them in client Machines, Can Anybody help
me in this regards?
Regards
Meer Akbar AliHi Meer,
In addition , you need to use external virtual switch for these VMs that are used for RDP connection from clients .
Please refer to the article below for virtual network configuration :
http://technet.microsoft.com/en-us/library/cc732470(v=WS.10).aspx#BKMK_ConfigVN
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to create web service client
Hi All,
I am new to web services .Can any body explain how to create web service client ....
Please give the give the discription step wise.
Thanx
ArunHi Krishna,
Yes it is possible.
Check this Link
[JDeveloper Web Service|http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2]
http://www.oracle.com/technology/obe/obe1013jdev/10131/10131_wstopdown/wstopdown.htm#t2
I strongly suggest you to go for Eclipse, instead of Netbeans or Jdeveloper incase of WebService. If you want to run your code in all the Server without making any changes go for Eclipse based development for Web Service.
Kindly let me know if you need some more inputs.
Regards,
Zack -
How to startup DB in client?
Hi there,
How to startup DB in client?
SQL> conn scott/tiger@mytestdb as sysdba
Connected.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
ORA-12528: Message 12528 not found; product=RDBMS; facility=ORAI used all default setting when creating DB.
What other setting is needed?You have 2 problems:
1) ORACLE_HOME not set as environment variable (you don't see a real error message)
2) dynamic service registration with the listener
Error is:
Error: ORA-12528 (TNS-12528)
Text: TNS:listener: all appropriate instances are blocking new
connections
That means , listener does not know the service, because there's no one defined statically in your listener.ora . Dynamic registration requires an open database.
By the way in my opinion it's not a good idea to grant user scott the sysdba privilege.
Werner -
How to debug a Mobile client application
Hi,
How to debug a mobile client application on the laptop, where we dont have any .NET 2003 application installed. (not an MDW)
If we get any error on the application, which could be a UI error on laptop, and if everything is working fine on the MDW, is there any way to debug the application on Mobile client?
Also, please provide me links or tips on how to debug the mobile application, on MDW as well.
Regards,
Praveen.Hi,
to be able to debug on a local machine you would need at least to install the UI/BOL class files and the project files and make some local settings.
But anyway on all clients there should be the same MSA installation like it is on the MDW so in case of an issue it is normally caused by local (inconsistent) data.
I would suggest to access the laptop IDES database by changing your MDW odbc settings and perform the debug session on the MDW.
Debugging in VB .net is similar to VB6 but you have to notice that changing of the code is NOT possible when being in debug mode.
Regards,
Wolfhard -
How can I add a client wireless usig Airport Utility 6.0?
In menu airport of firmware 6.0 there is not window "Add a wireless client". I'm using Mac Os lion with Airport Utility6.0, how can I add a client wireless with this firmware)?
If you have a dual band AirPort Extreme, you can add another to "extend" both bands of your network to provide more wireless coverage.
The "best" way to do this is to connect the "remote" access point back to your main AirPort Extreme using an Ethernet connection. This preserves bandwidth on the network better than any other method...and...you can locate the "remote" Extreme exactly in the area where more coverage is needed. Instructions for thhis are here:
http://support.apple.com/kb/HT4260
You might be able to connect using wireless only, but this is always "Iffy".
In general, the Extreme would need to be located approximately half the distance from your main router to the general area that needs more coverage. But, walls, ceilings and other obstructions usually come into play, requiring some experimentation. Instructions are here:
http://support.apple.com/kb/HT4259
If you elect to try wireless, you really won't know if things will work until you try. Recommend that you have a "Plan B" if wireless does not work for your purpose. -
How to login into 000 client -- sap* in ecc6.0
how to login into 000 client--sap* in ecc6.0
because i need to generate solution maneger key.
or tell me any alternate for generating the same.
Edited by: THIRU MALAI on May 9, 2008 9:55 AMHi,
1. You have to Configure the Email connections through SCOT tcode.
2. After that you ccan send/recive a mails from exchange server and SAP R/3 systems.
Look into the following link.
http://help.spa.com--> search for E-mail configuration and aslo search for FAX configuration.
Regards,
Srini Nookala
Maybe you are looking for
-
Itunes wont work because of quicktime or something?
ok well heres the deal itunes was working fine for me until one day i decided to upgrade cause it said i should from then on now it wont open because it says i need a high version of quicktime. it says i have quicktime 6.5 i and i need 7.0 however ev
-
Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the s
-
[SOLVED] udev not creating gamepad device
I'm having trouble with an USB gamepad that actually is an Playstation controller adapter in Arch, I cannot use it in PCSX-Reloaded for instance. Here's the output of lsusb when plugged: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Ma
-
HT201209 How do you redeem an email gift card?
I've clicked redeem now on the email and it just takes me to the download itunes page even though I have already downloaded the newest version and I can't get the money on my account
-
Button List madness-- the craziest glitch you can't find in the forums
Hi all, I'm a stumped long-time FCP user today. As I dragged in the View All Frames button into my workspace, I accidently clicked the button with the mouse. My screen is filled with video from my timeline, but any keystroke to "get out" of this resu