How do I merge a 264 file and ac3 file exported from compressor?

I am trying to create an .mts file from these two streams.
Anyone?

You make the transport stream in Compressor. You should try the Compressor forum and give the version number. I haven't used the current version and don't know if the functionality is available in it.

Similar Messages

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

How do I merge my iTunes libraries and make them accessible from multiple Systems?

Our family has several Macs using several versions of OSX.
My Music collection, mostly converted from my large collection of CDs, is scattered across all the Macs and several hard drives with Systems running OSX 10.6.8, 10.8.5 and 10.9.4.
The older Macs can not be upgraded to either Mountain Lion nor Mavericks.
My most organised library is the latest on the Mac running Mavericks. It is tidy ALAC, and has all the correct metadata such as covers, composers, ISBNs etc. So I have started by organising those onto an external 1.5 Tb Hard Drive in a folder called Central iTunes Library.
I intend to then go through the Libraries on the other hard drives and systems and add them to this central external collection.
1. Will I be able to open the Central Library (created in iTunes 11.2.2) on the older Macs and Systems directly, by plugging in the hard drive?
2. Is there a better way than reopening the files from the other Systems and Hard Drives and importing them all over again into the Central Library?
eg Drag and Drop or File > New or a Dedicated Utility for the purpose
3. Is sharing from my Mac, the only way to let everyone access the library?
4. Will the other Macs be able to add to the Central Library once it is shared from my Mac?
5. How do we manage our various iPhones, iPods and iPads with one central Library?
6. Are there any hazards to watch out for?
7. What is the best way to have a duplicated backup of the library?
Thanks,
Peter

The concept of a central library sounds great (in principle), but unless you can all follow the same rules about handling playlist/ folder/ genre naming it can get into a mess. Are you sure you want to see all of your son's & wife's music when setting up iOS syncing? I also suspect your son & wife may have a different opinion about accessing all your music (with it's larger ALAC file size) - they may be happier not sifting through all your tracks to find the ones they like for use on iOS?
The store authorizes to the Mac not the library - so as you move around on each Mac & use your AppleID to purchase that Mac will get tied to that AppleID. That would be fine accept iTunes has a 90 day limit on changing the Apple ID on a computer. You will have to wait 3 months to switch to using another Apple ID to download music & apps on that device - that also affects apps that sync from iOS for backups.
Personally I think that users need their own Mac with their own library (& each Mac needs to be backed up), especially if they have their own iOS device that needs syncing to a Mac. Home Sharing is ok for moving files that you want to hear from another library - but it can be bad when a client is on wifi.
iTunes is designed to be a single user who can share over the network - it isn't intended to be one large bucket for every family member to store media, the Apple ID issue makes this pretty clear to me.
Your flaky wifi issue sounds like a reason not to rely on anything that requires networking to work too.
You are correct to worry about the library versions, eventually an iTunes update will alter the library format. Only machines that have that version can open the library - this happened from iTunes 10.7 to iTunes 11.
See how many 'old libraries' you have in the Music/iTunes/Previous iTunes Libraries/ folder - that indicates how many times iTunes has backed up & upgraded the library. Is that more than expected? Major iTunes versions will need to be performed at the same time to keep it all working with the 'central music library'.
You may be tempted to access one iTunes library over file sharing on multiple Macs. This can cause problems when one Mac updates something (placing a file lock on the library file). It's hit or miss whether the other Macs can read & write to the library.
PJRS seems to be using a networked iTunes library - I can't understand how it works with iTunes from Tiger to 10.9? What version of iTunes is used PJRS?

How can i make shorten systemlog files and joblog files on OS

Hello
How can i make shorten systemlog files and joblog files on OS

Hello Jan,
You can limit the size of system log.
The size of the application server's System Log is determined by the
following SAP profile parameters. Once the current System Log reaches
the maximum file size, it gets moved to the old_file and and a new
System Log file gets created. The number of past days messages in the
System Log depends on the amount/activity of System Log messages and the
max file size. Once messages get rolled off the current and old files,
they are no longer retrievable.
rslg/local/file /usr/sap/<SID>/D*/log/SLOG<SYSNO>
rslg/local/old_file /usr/sap/<SID>/D*/log/SLOGO<SYSNO>
rslg/max_diskspace/local 1000000
rslg/central/file /usr/sap/<SID>/SYS/global/SLOGJ
rslg/central/old_file /usr/sap/<SID>/SYS/global/SLOGJO
rslg/max_diskspace/central
Refer to http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcbaf36611d3a6510000e835363f/content.htm
for explanation of profile parameters.you can reduce the size of system log using rslg/max_diskspace_local and rslg/max_diskspace_central
But you can't reduce the size of job log files on OS
Rohit

How to install the struts-el jar and tld file

How can i install/configure the struts-el jar and struts-logic-el.tld. When I tried with the related sites, i couldn't get any jar files for struts-el tag.
I got only 404 status error.
From where and how to get the jar file and tld file for the struts-el tag .Please refer me

The jar file is part of the download of struts.
its in the /contrib/lib directory
You should need struts, jstl plus the struts-el jar files.
The tld files should not be necessary - just use the standard URIs for them.
eg http://struts.apache.org/tags-logic-el

How to convert a Form to a Text file and XML file?

Hi:
I want to convert a Form to a Text file and XML file,but I don't know how convert?
Please help!
Oracle Form Builder V10.1.2.0.2
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
Thanks in advance!

..or follow the steps in Mtalink note; Doc ID: Note:196924.1
Forms XML Conversion Feature ( Converting Forms To XML)

How to design SQL server data file and log file growth

how to design SQL DB data file and log file growth- SQL server 2012
if my data file is having 10 GB sizze and log file is having 5 GB size
what should be the size in MB (not in %) of autogrowth. based on what we have to determine the ideal size of file auto growth.

It's very difficult to give a definitive answer on this. Best principal is to size your database correctly in advance so that you never have to autogrow, of course in reality that isn't always practical.
The setting you use is really dictated by the expected growth in your files. Given that the size is relatively small why not set it to 1gb on the datafile(s) and 512mb on the log file? The important thing is to monitor it on an on-going basis to see if that's
the appropriate amount.
One thing you should do is enable instant file initialization by granting the service account Perform Volume Maintenance tasks in group policy. This will allow the data files to grow quickly when required, details here:
https://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
Also, it possible to query the default trace to find autogrowth events, if you wanted you could write an alert/sql job based on this
SELECT
[DatabaseName],
[FileName],
[SPID],
[Duration],
[StartTime],
[EndTime],
CASE [EventClass]
WHEN 92 THEN 'Data'
WHEN 93 THEN 'Log' END
FROM sys.fn_trace_gettable('c:\path\to\trace.trc', DEFAULT)
WHERE
EventClass IN (92,93)
hope that helps

How to Add JAR files and Config files to CLASSPATH at runtime?

QUERY:
During runtime, I need to load the JAR files and relevant config files( .cfg files and .properties file) into CLASSPATH and run a specific java program from one of the JAR which is available in CLASSPATH.
Please advise me any relevant Java API details or a sample java program to implement the above use case.
Thanks in advance.

During runtime, I need to load the JAR files and relevant config files( .cfg files and .properties file) into CLASSPATH and run a specific java program from one of the JAR which is available in CLASSPATH.
Please advise me any relevant Java API details or a sample java program to implement the above use case.
You don't add to YOUR classpath once your app is launched.
You create a NEW process for the app you want to run and provide the proper environment for it to run in - including any PATH or CLASSPATH environment variables.
The Java API for the ProcessBuilder class has a simple example that shows how to create the arguments and launch an external application.
ProcessBuilder (Java Platform SE 7 )
There are also PLENTY of other examples of using ProcessBuilder; just search the net.

How to open .rar files and .exe files on mac

HI
I'm new user on mac and would like to know how to open .rar files and .exe files on MAC OS X
Thanks

How is this a Compressor question?
.exe is a Windows only Executable, and can't be opened on a Mac, unless you have Windows installed.
Michael Trauffer

How can I recover my purchased books and PDF files in my library?

How can I recover my purchased books and PDF files in my library?

you can re-download all purchases from the iBooks store at any time. PDF's you will need to have kept the PDF on your hard drive or on a service such as Dropbox, then you can re-import them into iTunes.

How to display RTF file and .doc file in JTextPane

How to display RTF file and .doc file in JTextPane??

Duplicate post
http://forum.java.sun.com/thread.jsp?forum=57&thread=567029&tstart=0&trange=30

How do I get my home movies and avi files to play on my ipad 3?

How do I get my home movies and avi files to play on my ipad 3?

1) Download a third party player on the iPad, such as avplayerhd or cinexplayer. Search app store for AVI and read some reviews.
2) Convert the files in a program such as handbrake, mpegstreamclip on the pc and import them.
3) Download air video from the app store, install the server software on the pc and stream away.
Take your pick.

How to Add .m2v and .ac3 files in encore?

I am doing my HD post in FCP and creating .m2v and .ac3 files using compressor. I would like to burn my DVDs in encore to try out blu-ray DVDs. How do I add separate .ac3 and .m2v files in encore?
Thanks

They get created as separate files originally. Just Import both and add each to the timeline.

My Mac Book Pro is giving me a message that the start up disk is full, how do I delete files, and what files should I be deleting

My Mac Book Pro is giving me a message that the start up disk is full, how do I delete files, and what files should I be deleting

There are several nice programs that can help you figure out what's on your computer - OmniDiskSweep, WhatSize, and DaisyDisk are the three I like. If you've had your computer for a while - and especially if this isn't your first Mac and you've been migrating from one computer to another, one of these programs can help you find files you didn't know your computer still had. For example, when I was trying to shed files to fit int a 256GB SSD, I discovered I had nearly 1GB of files in my Application Support folder belonging to programs I no longer used.
Other than that, your easy choice are music, video, and photos. They tend to be the big files. A movie will generally be at least 1.25GB, for example.

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

How do I merge a 264 file and ac3 file exported from compressor?

Similar Messages

Maybe you are looking for