How do I migrate the data on a RAID on my old Mac Pro to a new RAID array on my new Mac Pro?

We have an older Mac Pro (no Thunderbolt) with four drives (2 of which are configured RAID 0). The new machine has a LaCie RAID on it with 2 drives RAID 1 and 2 drives RAID 0. What's the best way to migrate the data from the old system to the new system? Do I use Migration asst to get the data and settings from the old main to the new main and then xfer the data from the ancillary drives over?

Read my post in this discussion.
https://discussions.apple.com/thread/3445538?start=0&tstart=0

Similar Messages

How to migrate the data from DB to another DB

Hi folks,
             In my project I have one requirement. Let me explain in detail we are maintain two databases one for
             master database called *GIIS* and one is history database HIST. Both DB version is 10g R1.
             (Both DB’s have same no table as well structures)
             1. The GIIS database contains nearly 400 tables (master table as well as temporary table)
                   each Master table having it’s own temporary table.
             2. Whenever we made the entry first it will go to temporary table after authorized that entry it will move to the master table
             3. But the temporary table contains the data after move to master table .
             4.     The temporary table data’s will be move to the HIST database each and every day at the night.
                This migration we done through the procedure. After migration complete the temporary table data’s will de deleted.
My Question:
           1.     Whether it’s good practice to migrate the data from GIIS DB to another HIST DB using oracle stored procedure.
                 (we created the DB link from GIIS to HIST)
           2.     If not can any one suggest me the way to migrate the data from GIIS to HIST.?
           3.     Is there any other possibility to migrate the data from GIIS to HIST with out using procedure?Thanks
Arun

Arun wrote:
Hi Mr.Aman Brother
First of all sorry . I am not saying that don't command my requirement. Just i want know the way of migrate the data from one DB to another DB.
you saying that IMPORT/EXPORT is one of the way to do migration.
But in client side they don't know how to do the IMPORT & EXPORT the database..
Can you suggest me the another way to do that
Arun,
If the client doesn't know how to do exp/imp, I would really doubt and would be immensely concerned before suggesting the client any other way. If they don't know, tell them that there is a concept called test database which is used for learning so they should invest time to learn this technique since the other options suggested by fellow members are far more tougher than this one.
Aman....

How can we do the data migration between Oracle Applications and SAP R/3.

Hi All,
How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
Awaiting for best possible solution.
Thanks in advance.
Regards
Dharmaraju

the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

How to migrate the data from DEC RDB 5.1 to Oracle 11g

Hi,
As part of my project, we need to migrate the data from DEC RDB 5.1 present on Alpha server with VMS 6.1 OS into Oracle 11g. The size of the data in DEC RDB is around 40 GB.
Could you please suggest various ways of getting this done in easy and simpler way?
Thanks in advance.

Hello,
when Oracle bought Rdb from Digital Equipment Corporation (DEC) in 1994, the name of the product changed from DEC Rdb to Oracle Rdb. Meanwhile the actual version of Rdb is 7.2, so you are on a VERY old version. And that excludes the suggestions from the mentioned note to use a database link from Oracle RDBMS to Rdb, that is simply not possible with that old version of Rdb.
But Rdb 5.1 knew already the Rdb Management Utility (RMU) - I just checked that with Rdb 4.1 which is even older.
There are two commands that are helpful for your task.
RMU/EXTRACT - that writes the metadata into a file. That output helps you to build a script to create all the objects in your target database.
RMU/UNLOAD - that writes the data of each table into a formatted file (one file per table). That output can be used by the SQL*Loader to load your data into the target database.
You can read all details about these commands in the online help on your Alpha. At first, issue the HELP command and look in the output list whether it lists a command RMU or RMU51. Then run that command:
$ help rmu /extract
and
$ help rmu /unload
Replace rmu by rmu51 if the help command shows you that rmu51 exists but not rmu.
There is one caveat. Do you use blobs in your Rdb database? If you don't know that, create an the output with RMU/EXTRACT and search the output file for the string LIST OF BYTE VARYING. If there are none then you have no blobs. If you have some you need to take more care of them, they can't be unloaded into a formatted file, that must happen programmatical. If you have such fields then let me know, then I'll tell you how to get them out of your Rdb database.
Best regards
Wolfgang
P.S.: For Rdb related questions it is better to ask in our Communities at https://communities.oracle.com/portal/server.pt/community/rdb_product_family_on_openvms . That forum is watched by Rdb Support and Development.

I bought an iPad 3 yesterday; this is an upgrade from the original iPad. I was told that migrating the data would be simple. My desktop is a PC with Windows 7 Professional. I can't find a way to back up my old iPad so I can restore the data to the new

I bought an update to the original iPad an iPad 3. In was told that migrating the data from my old iPad to the new will be a snap. Alas, it isn't. My desktop is a new high end PC that came preloaded with Windows 7 Professional and I have had nothing but problems. My earlier computer was XP and everything, including my Apple interface, in particular iTunes, worked without problems. When I was trying to back up my data from the old iPad to my desktop, the only thing it would do is synchronize, then got an error message to download the latest iTunes, which I did but it still did not work. I have a lot of music both purchased through iTunes and a lot of others which were CDs that were copied to the desktop. I also have a lot of books through Kindle and other books in iBooks and audio books from other sources, plus two iPods I want to sync. I need some advise on where I find the back up feature in iTunes so I can copy all the data on from my old iPad. Your help would be most appreciated. Thank you.

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion. how can I restore the data from the time capsule to my new Mac?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

Migrate the data that I have in the CM from an EP 6.0 to the EP 7.0

Hello,
I have a problem. I want to migrate the data that I have in the CM from an EP 6.0 to the EP 7.0 and I don't know how to do it. Can someone help me please?.
Thank i advance
Pablo Mortera.

Use ICE protocol to transfer KM content from one landscape to other
check the below link which help you step by step
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/802c1739-d270-2910-ad9f-f369de07c1bf
Use ice offline transfer which is the easiest way.
Raghu

Migration the Data

Suppose i have the Oracle10g Database in UNIX AIX Machine, but now i want to migrate the data from Oracle10g Database in UNIX AIX to Oracle 10g of MAC OSX. How it will be?

If you are using Oracle 10g Rel.2, more lucky enough that you entire database can be transport to cross platform. If you are using Rel.1, then, you need to use transportable tablepsace facility to do the same. In Rel.1, only tablespace level of transport among cross plat form is available.
SELECT tp.endian_format
FROM v$transportable_platform tp,
v$database d
WHERE tp.platform_name = d.platform_name;
The above query gives you the edian format of your system and also check v$transportable_platform for the edian platform compatibility.
Jaffar

How can we give the Data Format (File Type ) in Runtime

Hi all,
How can we give the Data Format (File Type ) in Runtime for the following method,
cl_gui_frontend_services=>gui_download.
Thanks in advance
Sri

There is a filetype parameter which you can set
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
*    BIN_FILESIZE              =
    filename                  =
*    FILETYPE                  = 'ASC'
*    APPEND                    = SPACE
*    WRITE_FIELD_SEPARATOR     = SPACE
*    HEADER                    = '00'
*    TRUNC_TRAILING_BLANKS     = SPACE
*    WRITE_LF                  = 'X'
*    COL_SELECT                = SPACE
*    COL_SELECT_MASK           = SPACE
*    DAT_MODE                  = SPACE
*    CONFIRM_OVERWRITE         = SPACE
*    NO_AUTH_CHECK             = SPACE
*    CODEPAGE                  = SPACE
*    IGNORE_CERR               = ABAP_TRUE
*    REPLACEMENT               = '#'
*    WRITE_BOM                 = SPACE
*    TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
*    FILELENGTH                =
changing
    data_tab                  =
* EXCEPTIONS
*    FILE_WRITE_ERROR          = 1
*    NO_BATCH                  = 2
*    GUI_REFUSE_FILETRANSFER   = 3
*    INVALID_TYPE              = 4
*    NO_AUTHORITY              = 5
*    UNKNOWN_ERROR             = 6
*    HEADER_NOT_ALLOWED        = 7
*    SEPARATOR_NOT_ALLOWED     = 8
*    FILESIZE_NOT_ALLOWED      = 9
*    HEADER_TOO_LONG           = 10
*    DP_ERROR_CREATE           = 11
*    DP_ERROR_SEND             = 12
*    DP_ERROR_WRITE            = 13
*    UNKNOWN_DP_ERROR          = 14
*    ACCESS_DENIED             = 15
*    DP_OUT_OF_MEMORY          = 16
*    DISK_FULL                 = 17
*    DP_TIMEOUT                = 18
*    FILE_NOT_FOUND            = 19
*    DATAPROVIDER_EXCEPTION    = 20
*    CONTROL_FLUSH_ERROR       = 21
*    NOT_SUPPORTED_BY_GUI      = 22
*    ERROR_NO_GUI              = 23
*    others                    = 24

HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

Hai Frnds,
i Attend an interview they asked this questions can u know the answeres . tell me .
In File to file scenario how can we reprocess records which failed records.
HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
Thanks in advance
thahir

Hi,
Refer these links:
this might help you
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
validating against schema file for the output XML file
Informing the sender about bad records
Regards,
Nithiyanandam

How can we view the data asociated with Request ID

Hi All,
I have data loaded in an ODS there are multiple files loaded in this ODS. Now i want to view data for a perticuler request OR i want to know how can we know the data associated with a perticular request.
Please help me out.
Thanks & Regards
Amit Kumar

Copy the request number (not request ID) from the ODS manage screen, Goto RSRQ give the request number and execute. it shows the monitor screen- now goto PSA from the top and check the data. But this possible only if you are loading data to PSA also along with ODS.
Otherwise, Goto Display Data of ODS from the right click on it -- in the selection screen give the Request ID that you want to check the data. Then it displays only that request data.
Hope this helps.
Veerendra.
Edited by: denduluri veerendra kumar on Dec 1, 2009 12:40 PM
Edited by: denduluri veerendra kumar on Dec 1, 2009 12:43 PM

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

My parents have one apple id and me and my two other siblings are getting our own. How can I transfer the data saved on the parent apple id to all three kids apple ids?

Me and my siblings all want our own apple ids, and my mom has the apple id that has all of our games, apps, movies, and music on there. how can we copy the data onone apple id to the three kid accounts?
thanks!

Sorry, but unless I misunderstand what you're asking, you can't. Purchases from the iTunes Store are permanently tied to the Apple ID through which they were purchased. If your parents want you to be completely independent of their Apple ID and iTunes Store account, you'll each have to re-purchase the apps, etc. Otherwise they'll have to continue to allow you access to their account, or will have to do all the updates for you.
Regards.

How Can we get the data from Non-SAP to SAP in WebDynpro

Hi,
I hope u understand my query, How can we get the data from Non-SAP to SAP thru WebDynpro Programming.
Help out with the steps for getting the data or procedure.
Regards,
Mutyapu

You can expose the APIs in the Non-SAP backend as Web Services, and consume them in SAP by creating an Enterprise Proxy. Then these can be called just like normal class methods from Web Dynpro.
Regards,
Nithya

How do I migrate the data on a RAID on my old Mac Pro to a new RAID array on my new Mac Pro?

Similar Messages

Maybe you are looking for