How do I modify my calling plan to include canada
Does anyone know--how do I modify my calling plan to include Canada temporarily. I have signed up for the $25 for 100mb data, but can't find a link to the change in calling plan. Any advice?
Global Plans and Pricing - Verizon Wireless
Good Luck
Similar Messages
-
BPS: how to restore modified standard planning level into orignal content l
Hi Expert,
Can you plz explain how to restore modified standard planning level into orignal content level.
Thanks
Ajay KumarHi,
Please check the link. It miht help..
[Unable to View Standard Planning Functions]
Thanks
Pratyush -
How do I escalate a call when tech support lose intere
-----Original Message-----
From:
Sent: 24 March 2005 7:6
To: 'CLE Customer Support'
Subject: FW: How long do you expect me to wait for a reply?
Do I have to go to trading standards to get you to honour this warranty? This is a disgrace - sort it out. This is extremely poor customer service and a breach of your warranty.
-----Original Message-----
From:
Sent: 22 March 2005 08:5
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
How do I escalate this call? I have a card that is not working under warranty and you seem unwilling to answer my mails any more. I hate to be the bearer of bad news but you have to. This card must be fixed or replaced, and it would be nice if that happened sooner rather than later. Why am I doing all the chasing by the way, you're a big enough supplier to get this sort of thing right, aren't you?
Rob.
-----Original Message-----
From:
Sent: 7 March 2005 08:40
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Hello, it's me again, not heard from you for 5 days. Are you planning to reply? You have obligations of warranty which you are summarily failing to carry out here. Please sort this out!
Rob.
-----Original Message-----
From:
Sent: 3 March 2005 7:28
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Situation changed. Having restored settings to previous state after doing all the below, about a day later I now have no sound at all for no reason whatsoever. I have rebooted, re-checked all connections etc etc, sound has just disappeared in the middle of the day without changing anything. It was fine this morning and now it's completely silent and PC's been on all day. This card is definitely dead, what else would do that?!?!
Cheers,
Rob.
-----Original Message-----
From:
Sent: 2 March 2005 6:03
To: 'CLE Customer Support'
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Hi,
OK, I can't test on another PC as I don't have access to one, and I really dohope this is the last set of tests incidentally. It worked, then it stopped one day. A complete reformat and clean driver install didn't fix it. Re-seating the card didn't fix it. Seems pretty straight forward to me the card has failed, and I do need it replacing.
I have however done everything else below as requested. If I select CMSS, I get no output for rear-left/rear-right using channel test. If I select CMSS2, I get output from the front speakers for rear-left/rear-right channels, but nothing from the rear.
If I configure to 5. and enable CMSS I get output from jacks and 3 (orange & green)of the soundcard in the left headphone earpiece.
Hear from you soon,
Rob.
-----Original Message-----
From: CLE Customer Support [mailto:[email protected]]
Sent: 2 March 2005 03:7
Subject: RE: CLE - Technical Support Request (KMM563096I2452L0KM)
Dear Rob
Thanks for your reply
Please test the soundcard on another PC(With different motherboard) Ensure onboard soundcard is disabled.
Run creative diagnostic test, any problems?
Go to device manager, is there any problem with soundcard?
Configure the speaker setting as 5..
Please enable CMSS and play MP3.
Use a earphone and connect to line-out of soundcard.
Any sound?
Now please try on line-out3, any sound?
Please verify the correct jacks you are connecting..
CMSS is an option that allows you to play your audio to all 5. speakers even if you are not playing a true 5. encoded audio file. For example, if the sound is a stereo sound, it will duplicate the front channels, and send them to the rear channels. Then it will mix the left and right signals to create a center channel. Turning CMSS on basically simulates
5. audio.
TO TURN ON CMSS IN Mediasource
. Open MediaSource (Start, All Programs, Creative, Creative MediaSource, Creative MediaSource Organizer).
2. There should be an EAX button underneath the Record button at the bottom of the screen, towards the left. Beside this button, there should be a small ellipsis button (. . .) that you can press. Click on this.
3. Go to the CMSS 3D tab and check the box next to "Enable CMSS 3D"
4. Place a dot next to either CMSS or CMSS2. Whichever sounds better to you.
It is important to remember that if you do wish to play a 5. encoded file, you will need to turn CMSS off. Otherwise you might not receive each discreet channel.
Please retain all the previous correspondence when replying to this email.
Best Regards
Creative Customer Support Services
Creative Labs Europe
To provide feedback on your "Creative Experience" and our service please click on the following link:
http://www.**bleep**.com/support/con...asp?r=CLE&d=TS
Please do not use this link to submit technical queries
Original Message Follows:
Hi,
Tried all that and still no joy unfortunately. Everything ok except output from rear-left and rear-right.
Always disable onboard sound nad have just reformatted XP and reinatalled with drivers from creative website, so I know installation is not corrupt and up-to-date. I also had this problem before re-installation of XP, so suspect hardware rather than software failure.
Have removed all traces of card/drivers and tried again and moved PCI slots with same results.
Cheers,
Rob.
-----Original Message-----
From: CLE Customer Support [mailto:[email protected]]
Sent: 0 March 2005 03:37
Subject: RE: CLE - Technical Support Request (KMM5590925I2452L0KM)
Dear Rob
Thanks for your reply
Rear center is fine in speaker test...
Anyway if you have test the speaker with another device and no issue for rear channels, there is no problem with speaker system now...
Please insert the soundcard on another PCI slot, and make sure it is firmly inserted. Please disable any onboard sound card if available through BIOS.
Go to Control Panel, Add Remove Programs and un-install all listings related to your audio card. Do not restart your computer when prompted so.
Go to Control Panel, and switch to Classic View. Click System, Hardware tab, Device Manager button and delete all sound cards entries in Sound, Video and Game Controllers as well as any previous sound card entries from the Device Manager.
Reboot the computer and cancel out of any driver installation if you are prompted. Insert the Creative Sound Blaster installation CD into your CD-ROM dri've. Exit from the installation wizard if it autoruns.
Click Start, Run and then Browse. Browse to Z:\Audio\Drivers\CTZAPXX.EXE, where Z represents the CD Rom Dri've.
Choose YES if you receive a prompt "Overwrite existing shared creative audio driver files?"
Select Driver un-installation for WDM drivers and click OK.
When prompted to restart, say No.
Click Start, Run, type MSCONFIG and press Enter.
Check the box next to Selecti've Startup and deselect Load Startup Items.
Select the SERVICES tab and select Hide All Microsoft Services.
Uncheck all results and click OK.
Browse to the C:\Temp folder and C:\Windows\TEMP (if it exists) - all files and folders in the temp folder need to be either deleted or moved to a new folder.
Browse to Program Files, Creative and delete the Sound Blaster Folder - if you get a file that won't delete, right click on the file, click Properties and clear all the attributes. The file should then be able to be deleted.
Empty the Recycle Bin, and reboot the computer.
If you wish to reinstall your software & drivers, do this now. For more information on how to install your product, please visit the Product Guide page for installation instructions. Otherwise, go to the next step.
Click on Start, Run. Type MSCONFIG and press Enter.
Select Normal Startup, and press the OK button.
Reboot the computer
Run creative diagnostic test, any problems?
Configure the speaker setting as 5.
TEST CARD WITH HEADPHONES
. Run speaker test
2. Plug headphones into the front out jack 3. Click on the speaker test button 4. In the headphones you should hear a voice for front left, and front right.
5. Plug headphones into the rear out jack 6. Click on the speaker test button 7. In the headphones you should hear a voice for rear left and rear right.
8. Do you hear sound from each channel?
Any sound from rear channels?
Please retain all the previous correspondence when replying to this email.
Best Regards
Creative Customer Support Services
Creative Labs Europe
To provide feedback on your "Creative Experience" and our service please click on the following link:
http://www.**bleep**.com/support/con...asp?r=CLE&d=TS
Please do not use this link to submit technical queries
Original Message Follows:
Hi,
I have done the below, and get output via a walkman connected directly to the sub on both front and rear speakers no problems at all.
I have reconnected the cables from the sound card, run channel test again in speaker settings, and still get no output from rear-left and rear-right.
I should have mentioned before that rear-centre is fine.
Any further help will be greatly appreciated.
Cheers,
Rob.
-----Original Message-----
From: CLE Customer Support [mailto:[email protected]]
Sent: 09 March 2005 08:40
Subject: Re: CLE - Technical Support Request (KMM557969I2452L0KM)
Dear Rob
Thanks for contacting Creative Technical Support.
Please use an external cd player and connect to the front input on the subwoofer.
Play the CD, any sound?
Now try on the rear input.
Play the CD, any sound from the speakers?
Now please connect back the speakers to the PC.
Ensure you have connected properly.
Ensure you have configure 6. speaker setting, run a speaker test.
Any sound from rear channel?
Ensure the balance control is configure properly as well
Please retain all the previous correspondence when replying to this email.
Best Regards
Creative Customer Support Services
Creative Labs Europe
To provide feedback on your "Creative Experience" and our service please click on the following link:
http://www.**bleep**.com/support/con...asp?r=CLE&d=TS
Please do not use this link to submit technical queries
Original Message Follows:
=======================
Subject: CLE - Technical Support Request
Name:
E-mail Address:
Self Description:
ID(3) Advanced PC User
Country: United Kingdom
Support Inquiry: ID(3) My Creative hardware stopped functioning correctly
Product: Sound Blaster? Audigy? 2
Purchase Date: 4/3/2004
Serial Number:
Operating System: Windows XP
Creative Model Number: SB0240
Computer Brand/Model: self built
Processor/CPU: Athlon 3200+
Memory: 2xgb DDR400 Dimms
BIOS Type/Revision: Phoenix - rev 008
System Board/Chipset: ASUS A7N8X Deluxe rev2.0
Detailed Problem Description:
Typical, following months of trying to get a replacement remote control cable for my inspire 6. 6700 the 2 rear speakers on the set don't play sounds any more. I have done a clean XP install to ensure no driver corruption, but no difference. It's not the subwoofer as I have a spare, unused sub and that gives the same results.
I have also checked all cabling, mixer/volume settings and nothing unusual is showing.
Of course, my audigy 2 card is my guess as the culprit, I can't be positi've though. All other speakers operate perfectly, can even hear background hiss through the rear-left and rear-right speakers which won't play sounds/music/games or anything at all. But when I select "Creative Speaker Settings" to test the channels individually, they don't play a test sound here either.
Any help greatly appreciated.
Cheers,
Rob.
PS: Please remove the technical support advisor name when posting quote from the email.Message Edited by Jason-CL on 03-30-2005 06:7 AMHi qwerty,
Dun tink that creative customer support sucks cos I had been dealing with them in the past and I can say that their service are quite gd and fast. If you wanted a refund, I tink you need to contact the store that sells you the product. Dun tink creative will refund you though. -
How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?
MojaveMoon's solution will work if there is only one person you want to block your ID from; if you want to block your caller ID from everyone, you can go to your account online, go to Change Features, and scroll down till you see Caller ID block. Instructions say that once this is activated, you can dial *82 before any # you WANT to display your number to, but all others will be blocked.
If you are on a Family share plan, the account owner needs to log in and choose your line to activate this feature. -
How to use @jws:sql call Stored Procedure from Workshop
Is there anyone know how to use @jws tag call Sybase stored procedure within
Workshop,
Thanks,Anurag,
Do you know is there any plan to add this feature in future release? and
when?
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
In the current release, we do not support calling stored procedures from a
database control. You will have to write JDBC code in the JWS file to call
stored procedures.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Anurag,
I know how to use DB connection pool and create a db control with it. In
fact, we have created a Web Service with the db control using plain SQL
in
@jws:sql. However, my question here is how to use @jws tag in Weblogic
Workshop to create a Web Services based on Sybase stored procedure orany
Stored Proc not plain SQL.
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
You can use a database control to obtain a connection from any JDBC
Connection Pool configured in the config.xml file. The JDBC Connectionpool
could be connecting to any database, the database control is
independent
of
that.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Is there anyone know how to use @jws tag call Sybase stored
procedure
within
Workshop,
Thanks, -
How can I modify / update T002C's only one field
Hi everyone ;
I would like to write dialog programing code. After I am writing call screen screennumber, I would like to generate a design in screen painter.But screen painter doesn't open. There is an error.
Error says ' EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#' and I search about this error. I solve the problem. Solution is T002C table's secondary language field must be writing , not empty.
When I would like to update the field's of T002C tables sap is giving an error. Error is 'Table maintenance not allowed for table T002C'.
How can I modify the field's of table T002C?dont know about the stock taking object but may be the grpo object would help
HTH
Message was edited by:
Manu Ashok -
How to redeploy modified application in weblogic server?
Hi All,
How to redeploy modified application on Web Logic server without restarting the server?.
Please any one guide to me.
Thanks Advance,
Rengasamy.AHi Rengasamy,
You can use weblogic.Deployer or WLST or ANT script to redeploy your application on the server.
Topic: Ant to Deploy & Redeploy Applications
http://middlewaremagic.com/weblogic/?p=373
OR
Same way you can use WLST Script as well to redeploy your application.
wls:/mydomain/serverConfig> progress=redeploy('myApp' 'c:/myapps/plan.xml')
OR
wls:/mydomain/serverConfig> progress=redeploy('myApp')
Topic: Recursive Deployment Using WLST
http://middlewaremagic.com/weblogic/?p=303
OR
You can also use the "weblogic.Deployer" utility like following:
http://download.oracle.com/docs/cd/E13222_01/wls/docs90/deployment/wldeployer.html#1007071
Thanks
Ravish Mody -
How can BT not know what plans I'm on
On my BT online it shows the incorrect information for my phone plus call package I have evenings and weekends it shows just weekends, and on my TV package it says ""We can't find your TV plan details"
I am charge correctley ie extra £2 pm for evening calls and I'm on the entertainment extra TV package
I want to add the bolt on HD package when I try to order it adds the enterainment extra package trying to charge me what I'm already paying plus the £3 HD package
Tried ringing to order and they were unable to help
Very poor service how can I give BT more money each month when I can't order the bolt ons :-((My plan shows evening and weekends, even though I pay the £7 for all inclusive.
It gets worse though, my bill shows I pay the £7, right before it shows me how much I owe for calls made weekdays daytime. This month they are trying to charge me £15, last month it was £30.
Every month I ring up and complain, every month they agree that I am right, and refund the difference. They always assure me that it won't happen again, but it always does. -
How do I modify the image size on OXO template HP
the temporary site is "http://printtest2.businesscatalyst.com/"
this is regarding what appears to be a "catalogue" presented on the homepage of the OXO template site. I want to modify the size of the images but can't find where the code is kept.
When I'm in "design view" it looks like the content is being called by // {module_webapps,13325,a,}
and when in "code view" it looks like its called by // {module_productfeaturelist,last,2,Default,,,true}
Where can I view these pieces of code, or the module screens, and how do I modify the attributes?
Is the {module_productfeaturelist,last,2,Default,,,true}, embedded in the {module_webapps,13325,a,} and if so, where can I go to see that?
Thanks very much.
Scott.something is changing the file size (dimensions), the actual dimensions are smaller than what is displayed.
Can I modify the css through the BC admin interface, if so, where?
I know this is newbie stuff, but I gotta start somewhere.
Thanks.
Scott. -
How can we modify alv output list
Hi
this is fazil.
Please tell me any body How can we modify alv output list.
Thanks & Regards
Fazil
[email protected]Fazil,
check the program,
You can find the code in this program 'BCALV_FIELDCAT_TEST'
*& Report BCALV_FIELDCAT_TEST *
This report allows to modify the fieldcatalog of a corresponding
output table and to view the effects of your changes directly.
Note that for some changes you need to newly display the whole
ALV Grid Control, e.g., DDIC-Fields are read only the first time
you call SET_READY_FOR_FIRST_DISPLAY.
Note also that not all scenarios can be tested since the output
table does not comprise all fields to test available features
of the fieldcatalog. Copy this program and extend the output
table accordingly if you want to test such a special feature.
(The field CARRNAME in 'gt_sflight' was added to test field REF_FIELD
and TXT_FIELD of the fieldcatalog - see what happens if you
calculate subtotals by carrier-id).
report bcalvt_fieldcatalog .
data: ok_code type sy-ucomm,
save_ok_code type sy-ucomm,
fieldcatalog for output table
gt_fieldcat type lvc_t_fcat,
fieldcatalog for fieldcatalog itself:
gt_fcatfcat type lvc_t_fcat,
gs_fcatlayo type lvc_s_layo.
Output table
data: begin of gt_sflight occurs 0.
data: carrname type s_carrname.
include structure sflight.
data: end of gt_sflight.
data: g_max type i value 100.
data: g_all type c value SPACE.
Controls to display gt_sflight and corresponding fieldcatalog
data: g_docking type ref to cl_gui_docking_container,
g_alv type ref to cl_gui_alv_grid.
data: g_custom_container type ref to cl_gui_custom_container,
g_editable_alv type ref to cl_gui_alv_grid.
LOCAL CLASS Definition
class lcl_event_receiver definition.
public section.
methods handle_data_changed
for event data_changed of cl_gui_alv_grid
importing er_data_changed.
endclass.
class lcl_event_receiver implementation.
method handle_data_changed.
at the time being, no checks are made...
endmethod.
endclass.
data: event_receiver type ref to lcl_event_receiver.
end-of-selection.
set screen 100.
*& Module STATUS_0100 OUTPUT
text
module status_0100 output.
set pf-status 'BASIC'.
set titlebar 'BASICTITLE'.
create ALV Grid Control in the first run
if g_docking is initial.
perform create_and_init_controls.
endif.
endmodule. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
module user_command_0100 input.
save_ok_code = ok_code.
clear ok_code.
case save_ok_code.
when 'SUBMIT'.
set the frontend fieldcatalog
ATTENTION: DDIC-Fields are not updated using this method!
(see 'RESTART')
call method g_alv->set_frontend_fieldcatalog
exporting
it_fieldcatalog = gt_fieldcat.
call method g_alv->refresh_table_display.
call method cl_gui_cfw=>flush.
when 'RESTART'.
Destroy the control currently visible and display it again
using the changed fieldcatalog.
perform restart_sflight.
when '&ALL'.
perform switch_visibility.
endcase.
endmodule. " USER_COMMAND_0100 INPUT
*& Form CREATE_AND_INIT_CONTROLS
text
--> p1 text
<-- p2 text
form create_and_init_controls.
create object g_docking
exporting
dynnr = '100'
extension = 150
side = cl_gui_docking_container=>dock_at_bottom.
create object g_alv
exporting
i_parent = g_docking.
create object g_custom_container
exporting
container_name = 'CC_0100_FIELDCAT'.
create object g_editable_alv
exporting
i_parent = g_custom_container.
register events
create object event_receiver.
set handler event_receiver->handle_data_changed for g_editable_alv.
call method g_editable_alv->register_edit_event
exporting
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
perform build_fieldcatalogs changing gt_fieldcat gt_fcatfcat.
perform modify_fieldcatalog changing gt_fcatfcat.
perform select_data. "CHANGING gt_sflight
call method g_alv->set_table_for_first_display
changing
it_outtab = gt_sflight[]
it_fieldcatalog = gt_fieldcat[].
optimize column width of grid displaying fieldcatalog
gs_fcatlayo-cwidth_opt = 'X'.
Get fieldcatalog of table sflight - alv might have
modified it after passing.
call method g_alv->get_frontend_fieldcatalog
importing et_fieldcatalog = gt_fieldcat[].
call method cl_gui_cfw=>flush.
Display fieldcatalog of table sflight:
call method g_editable_alv->set_table_for_first_display
exporting
is_layout = gs_fcatlayo
changing
it_outtab = gt_fieldcat[]
it_fieldcatalog = gt_fcatfcat[].
register events
create object event_receiver.
set handler event_receiver->handle_data_changed for g_editable_alv.
endform. " CREATE_AND_INIT_CONTROLS
*& Form restart_sflight
text
--> p1 text
<-- p2 text
form restart_sflight.
data: ls_fieldcat type lvc_s_fcat.
free g_docking and thus g_alv
call method g_docking->free.
clear g_docking.
clear g_alv.
create new instances
create object g_docking
exporting
dynnr = '100'
extension = 150
side = cl_gui_docking_container=>dock_at_bottom.
create object g_alv
exporting
i_parent = g_docking.
This is an internal method to invalidate all fields in the fieldcat
loop at gt_fieldcat into ls_fieldcat.
clear ls_fieldcat-tech_comp.
modify gt_fieldcat from ls_fieldcat.
endloop.
Newly display the list with current fieldcatalog.
call method g_alv->set_table_for_first_display
changing
it_outtab = gt_sflight[]
it_fieldcatalog = gt_fieldcat.
Get fieldcatalog - it might be changed by ALV in the last call
call method g_alv->get_frontend_fieldcatalog
importing
et_fieldcatalog = gt_fieldcat[].
call method g_editable_alv->refresh_table_display.
call method cl_gui_cfw=>flush.
endform. " restart_sflight
*& Form select_data
text
--> p1 text
<-- p2 text
form select_data.
data: lt_sflight type table of sflight with header line,
ls_scarr type scarr.
select data of sflight
select * from sflight into table lt_sflight up to g_max rows.
copy data to gt_sflight and update CARRNAME
loop at lt_sflight.
move-corresponding lt_sflight to gt_sflight.
select single * from scarr into ls_scarr
where carrid = gt_sflight-carrid.
gt_sflight-carrname = ls_scarr-carrname.
append gt_sflight.
endloop.
endform. " select_data
*& Form BUILD_FIELDCATALOGS
text
<--P_GT_FIELDCAT text
<--P_GT_FCATFCAT text
form build_fieldcatalogs changing p_fieldcat type lvc_t_fcat
p_fcatfcat type lvc_t_fcat.
data: ls_fcat type lvc_s_fcat.
Fieldcatalog for table SFLIGHT: p_fieldcat
generate fieldcatalog automatically
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
changing
ct_fieldcat = p_fieldcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
shift all column positions to the right except for MANDT
loop at p_fieldcat into ls_fcat.
if ls_fcat-fieldname ne 'MANDT'.
add 1 to ls_fcat-col_pos.
if ls_fcat-fieldname = 'CARRID'.
ls_fcat-txt_field = 'CARRNAME'."link CARRNAME to CARRID
endif.
modify p_fieldcat from ls_fcat.
endif.
endloop.
create a new line for CARRNAME in p_fieldcat
clear ls_fcat.
ls_fcat-fieldname = 'CARRNAME'.
ls_fcat-ref_table = 'SCARR'.
ls_fcat-col_pos = 1.
insert new line before CARRID (do not forget MANDT!).
insert ls_fcat into p_fieldcat index 1.
Fieldcatalog for table LVC_T_FCAT:p_fcatfcat
Generate fieldcatalog of fieldcatalog structure.
This fieldcatalog is used to display fieldcatalog 'p_fieldcat'
on the top of the screen.
call function 'LVC_FIELDCATALOG_MERGE'
exporting
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
changing
ct_fieldcat = p_fcatfcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Hide all fields that are not documented (valid for release 4.6A)
perform hide_fields changing p_fcatfcat.
endform. " BUILD_FIELDCATALOGS
*& Module EXIT_PROGRAM INPUT
text
module exit_program input.
leave program.
endmodule. " EXIT_PROGRAM INPUT
*& Form MODIFY_FIELDCATALOG
text
<--P_GT_FCATFCAT text
form modify_fieldcatalog changing p_fcatfcat type lvc_t_fcat.
data ls_fcat type lvc_s_fcat.
loop at p_fcatfcat into ls_fcat.
ls_fcat-coltext = ls_fcat-fieldname.
ls_fcat-edit = 'X'.
if ls_fcat-fieldname = 'COL_POS' or ls_fcat-fieldname = 'FIELDNAME'.
ls_fcat-key = 'X'.
endif.
modify p_fcatfcat from ls_fcat.
endloop.
endform. " MODIFY_FIELDCATALOG
form hide_fields changing p_fieldcat type lvc_t_fcat.
data: ls_fcat type lvc_s_fcat.
Only show documented fields of fieldcatalog.
For a documentation choose "Help->Application Help" in the menu.
loop at p_fieldcat into ls_fcat.
if not (
ls_fcat-fieldname eq 'CFIELDNAME'
or ls_fcat-fieldname eq 'COL_POS'
or ls_fcat-fieldname eq 'COLDDICTXT'
or ls_fcat-fieldname eq 'COLTEXT'
or ls_fcat-fieldname eq 'CURRENCY'
or ls_fcat-fieldname eq 'DD_OUTLEN'
or ls_fcat-fieldname eq 'DECIMALS_O'
or ls_fcat-fieldname eq 'DECMLFIELD'
or ls_fcat-fieldname eq 'DO_SUM'
or ls_fcat-fieldname eq 'DRAGDROPID'
or ls_fcat-fieldname eq 'EDIT_MASK'
or ls_fcat-fieldname eq 'EMPHASIZE'
or ls_fcat-fieldname eq 'EXPONENT'
or ls_fcat-fieldname eq 'FIELDNAME'
or ls_fcat-fieldname eq 'HOTSPOT'
or ls_fcat-fieldname eq 'ICON'
or ls_fcat-fieldname eq 'INTLEN'
or ls_fcat-fieldname eq 'INTTYPE'
or ls_fcat-fieldname eq 'JUST'
or ls_fcat-fieldname eq 'KEY'
or ls_fcat-fieldname eq 'LOWERCASE'
or ls_fcat-fieldname eq 'LZERO'
or ls_fcat-fieldname eq 'NO_OUT'
or ls_fcat-fieldname eq 'NO_SIGN'
or ls_fcat-fieldname eq 'NO_SUM'
or ls_fcat-fieldname eq 'NO_ZERO'
or ls_fcat-fieldname eq 'OUTPUTLEN'
or ls_fcat-fieldname eq 'QFIELDNAME'
or ls_fcat-fieldname eq 'QUANTITY'
or ls_fcat-fieldname eq 'REF_FIELD'
or ls_fcat-fieldname eq 'REF_TABLE'
or ls_fcat-fieldname eq 'REPREP'
or ls_fcat-fieldname eq 'REPTEXT'
or ls_fcat-fieldname eq 'ROLLNAME'
or ls_fcat-fieldname eq 'ROUND'
or ls_fcat-fieldname eq 'ROUNDFIELD'
or ls_fcat-fieldname eq 'SCRTEXT_L'
or ls_fcat-fieldname eq 'SCRTEXT_M'
or ls_fcat-fieldname eq 'SCRTEXT_S'
or ls_fcat-fieldname eq 'SELDDICTXT'
or ls_fcat-fieldname eq 'SELTEXT'
or ls_fcat-fieldname eq 'SP_GROUP'
or ls_fcat-fieldname eq 'SYMBOL'
or ls_fcat-fieldname eq 'TECH'
or ls_fcat-fieldname eq 'TIPDDICTXT'
or ls_fcat-fieldname eq 'TOOLTIP'
or ls_fcat-fieldname eq 'TXT_FIELD' ).
ls_fcat-tech = 'X'.
endif.
modify p_fieldcat from ls_fcat.
endloop.
endform.
form switch_visibility.
data: lt_fcatfcat type lvc_t_fcat,
ls_fcat type lvc_s_fcat.
call method g_editable_alv->get_frontend_fieldcatalog
importing ET_FIELDCATALOG = lt_fcatfcat.
if not g_all is initial.
perform hide_fields changing lt_fcatfcat.
g_all = SPACE.
else.
loop at lt_fcatfcat into ls_fcat.
if ls_fcat-tech eq 'X'.
ls_fcat-tech = SPACE.
ls_fcat-no_out = 'X'.
modify lt_fcatfcat from ls_fcat.
endif.
endloop.
g_all = 'X'.
endif.
call method g_editable_alv->set_frontend_fieldcatalog
exporting it_fieldcatalog = lt_fcatfcat.
call method g_editable_alv->refresh_table_display.
endform.
Don't forget to rewaard if useful.. -
How to update/modify the ALV internal table once it is displayed
Hi All,
I have a alv grid report using fm reuse_alv_grid_dispaly. My requirement is to create sales order using bapi (up to here it is working fine) and once the SO is created update the function module tables field with the created sales order.
Example:
My alv grid display before creating SO:
Customer Material SalesOrder
1000001 material1
My alv grid display after creating SO:
Customer Material SalesOrder
1000001 material1 3025642
How can I achieve this functionality. Because the field catalog is already displayed, how can I modify/update it by adding the sales order number to it. Experts, suggest me.
Thanks.FORM callback_ucomm USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
CASE ucomm.
WHEN 'CRE'.
* Logic to create sales order here...
* Show the Sales order column
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_GET'
IMPORTING
et_fieldcat = gt_fieldcat
EXCEPTIONS
no_infos = 1
program_error = 2
OTHERS = 3.
if sy-subrc eq 0.
read table gt_fieldcat into gs_fieldcat with key fieldname = 'VBELN'.
if sy-subrc eq 0.
gs_fieldcat-no_out = space.
gs_fieldcat-tech = space.
modify gt_fieldcat from gs_fieldcat index sy-tabix transporting no_out tech.
endif.
CALL FUNCTION 'REUSE_ALV_GRID_LAYOUT_INFO_SET'
EXPORTING
it_fieldcat = gt_fieldcat[].
endif.
ENDFORM. -
Call Plan Charges....The Call Plan Costed More Tha...
I recently called BT regarding getting a cheaper Broadband and phone tarrif. The net result was that I got a reduction, but that this reduction ( of around £7 a month ) meant that I no longer had the Evenings and Weekends call plan.
Now this was the first I had any idea that I was actually PAYING to have a call plan. Maybe I'm silly and should have looked this up....but then again, nothing in my phone bills EVER mentioned any specific charge for a call plan, though they do mention a call plan. I have BT's latest tarrifs document and trying to understand the plans in it is like quantum mechanics....especially when it says 'includes line rental' yet the monthly line rental of £16 is more than the call plan !
So I am utterly confused. All the more so as having checked my bills for the last few years I see my average QUARTERLY phone use has been around £3.50....yes...barely anything at all. Yet it would appear I have been paying more than that...what exact figure I cannot work out....one source implies it was £22 a quarter and another implies £12.....for the privilege of making hardly any calls at all under this 'call plan'. In other words....paying at least £12 a quarter to make £3.50 worth of calls.
Am I just confused, silly for not having woken up to this earlier, or ( given that I have been with BT on this line for 19 years with similar usage ) should I never have been sold this 'call plan' in the first place ?The basic line rental includes free weekend calls. You have been paying extra for free weekday evening calls, so it depends on how many calls you make after 7pm in the evening.
Some of the broadband packages include free evening calls, so that must have been part of your original package.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Maybe dumb, but can you get the iphone without a calling plan?
I am currently on a sprint employee plan because a relative works there. I only pay 20 bucks a month. Regardless of how bad I want an iphone, I can justify switching while only paying 20 bucks a month for unlimited data and 500 peak minute voice calls. I am on the instinct, which i am not a particular fan of due to how basic and elementry it is. The only nice thing about it is that I can connect to the internet on my computer wherever I am by using the phone as a modem. Oh, and i will say that the navigation features are great as well!
On the other hand, the iphone is sick. I love the apps that it has to offer, and due to the fact that i get such a great deal on sprint, I was curious to know if the iphone can be purchased with only a data plan. I dont want the calling plan, just the data so taht i can use all of the apps. Is this possible? I was thinkin about an ipod touch, but i like the apps on the iphone that would require a 3g signal.It may be possible to cancel the unlimited data plan for the iPhone 3G and if so, you would also need to request that data access be disabled for your line/number or you will be charged by the KB for all data uploaded/downloaded via AT&T's data or internet network, which isn't cheap. You would also lose visual voicemail since visual voicemail messages are downloaded to the iPhone via AT&T's data or internet network only.
The iPhone is designed to always have an internet connection as long as there is an available wi-fi network that you have access to, or you have cellular reception. If you don't use the iPhone as designed and intended, you might as well get a different phone - a phone that isn't in the smart phone category and isn't designed to always have an internet connection or access. -
How will i get next call if there is no scheduling period
How will i get next call if there is no scheduling period? My requirement is to get next call generated whether there is no scheduling period.
Also is it possible to get next call once the previous one is technically closed even though there is NO scheduling period and completion requirement checkbox unchecked ?Hi Priyanka,
For your conditions
1. No Scheduling period
2, No Completion Requirement
After initial scheduling (IP10), depending on the cycle period (1 Mon, 1Yr etc).,
Whenever you run IP30, one call will be generated, if the plan date falls in the past. If the Plan date falls in the future a Scheduled hold line item will be seen in IP30, further no impact of IP30 will be seen, until this Hold item is called.
Jogeswara Rao K -
How can I quickly upgrade my plan (without phoning in)?
I exceeded my text limit and need to add-on more texts or upgrade the plan before my billing cycle ends (tomorrow).
Each time I've had to do this previously I phone the support number and wait forever on hold, then plod through
the whole ordeal with a human. This takes way more time than I can afford - how can I modify my plan easily online?
thanks.This is what comes up in my My Verizon homescreen:
I then select "Change features" under "PLAN". If you cannot find anything about adding texts under "Change features", you may try "Change Plan". As I have stated, I am unsure of where this would be since I am on a Talk and Text plan and don't have an option of adding additional texts since I have unlimited.
After selecting "Change features", you get this:
I would assume that adding texts would be available from this page if you were on just a talk plan. As you can see, at the top of this photo is a step for selecting the effective date. Hope this helps.
Maybe you are looking for
-
I recently was able to figure out (I am not tech savvy) how to transfer video and audio from my Macbook to my TV with the DVI to VGA adapter. How to connect it is as far as my knowledge goes on the subject and now I have a problem. My computer froze
-
I have a Mac Air. When I go to view video online (youtube for example), the screen for the video comes up with a black square space where the video should play. But there is no pay button and the vidoe never starts playing. Any suggestions would b
-
Hard drives icons allways get confused on the desktop
After starting my HD icons appear where they like to. No permission repair, no DiskWarrior would help. Any ideas..? Thanks bafomet
-
Could someone please tell me if there are problems between my K7T266 Pro and Maxtor Diamond Max Plus 9 (6Y160P0)? Thanks 4 answer
-
Is there any documentation or example on how to use Active data service with DVT Components Regards