How do I modify the angle in real time?

I would like to modify the transformation on the fly without using Alpha, do I just TG.setTransform(Transform3D)?
Urgent, thanks

It worked for me.

Similar Messages

  • How can I find the minimum in real time

    I 'am doing some type of sensing mechanism. I that the data is step count versus intensity. So I want to record the minimum in real time from. Please kindly help

    Hi perumpadapu,
    you should have learned by now to provide some meaningful example (data)…
    There are functions to detect minima: ArrayMinMax, "smaller than" comparison, PtByPtArrayMinMax, MinMax comparison, ...
    It all depends on your data!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How can I make the x axis real time?

    I would like to know how to make the X axis of a chart/Graph into realtime so that I can go in increments of seconds or milliseconds. How can I do this? I am getting some really funny stuff on my graphs and I notice the manual says that the "Time" label is just a default label. So I would like to know how to get the "real" time on my axis. Do you have any good ecamples?
    Thanks,
    Brian

    Zvezdana,
    I don't have LV 7, (I have 6.1) so that executable didn't come in. Also with what you mentioned won't I just get the time and date in seconds? what I want to get is the data ploted for the amount of time that the VI is running or that my Kodak Imaging board has been programmed to cycle within. I am going to attach some of the stuff I have been getting, I don't know if it is REAL TIME ,which I want, or if it is not.
    Attachments:
    Question_for_engineers.doc ‏20 KB
    Test_for_technicians.zip ‏347 KB
    Front_Panel1d.jpg ‏83 KB

  • How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    First, I couldn't seem to find that example either on computer or on the NI sites.
    The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
    We're still working on a simpler way to get accurate time.
    Rob

  • How do you modify the web.xml to lock down the pages from a user role

    how do you modify the web.xml to lock down the pages from a user role

    I'll make a stab at your question:
    The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:
    <!-- security constraints -->
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>protectedA</web-resource-name>
    <url-pattern>/protectedA</url-pattern>
    </web-resource-collection>
    <!-- authorization -->
    <auth-constraint>
    <role-name>sr_developer</role-name>
    </auth-constraint>
    </security-constraint>
    Sun's explaination here:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

  • How do you modify the default Execute thread count in Weblogic Server 9.2?

    How do you modify the default Execute thread count in Weblogic Server 9.2?
    How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
    Is there an option from the console?
    Please let me know.
    Thanks

    Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
    1) Modifying the config.xml
    Just add the following line(s) to each server definition :
    <server>
    <name>AdminServer</name>
    <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
    <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
    </server>
    2) Adding some JVM parameters
    It's safer the following way :
    add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
    Regards
    RR

  • In iMovie, how do you modify the duration of all the clips at once?

    In iMovie, using Mavericks O/S, how do you modify the duration of all the clips at once?

    To set the duration of any clips to be added in the future select the project then "Settings" above the viewer.    Adjust the slider to the right of "Clips" to the desired duration.
    To change clips already in the timeline, select all of the ones you want to change (so they have a yellow border), click on "Adjust" then click the info button (i in a circle).  You will see "Duration:"  Set the time in seconds and press return.
    Geoff.

  • How can we modify the maximum no. of columns in pivot table ?

    hi all,
    How can we modify the maximum no. of columns in pivot table ?
    do i need to change the nqconfig.ini or instanceconfig file or else?
    thnx..

    A little search on the forum :
    In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
    not exist already.
    Within the <PivotView> element add an entry that looks like:
    <MaxCells>nnnnnn</MaxCells>
    where nnnnnn is your desired limit for the maximum total number of cells allowed
    in a pivot.
    Warning: an excessively large number will cause more memory consumption and
    slower browser performance.The details here :
    Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • Qosmio X500-15F - How can I modify the DPI?

    Hello
    With Qosmio X500-15F and graphic card NVIDIA GeForce GTX 460M
    I'm using a professional software for jewelry building (Matrix 6.0 based on Rhinoceros 3D 4.0 SR9). When starting it, the software is asking me to set the DPI to normal.
    How can I modify the DPI? I already tried different resolution settings. It doesn't change the problem.
    Thanks for help

    DPI is how many pixels per inch of the LCD. You can't change that.
    I think the software needs a specific resolution or LCD size. Try lowering the resolution to 1280x800 or try an external monitor.

  • When I logon for XP, if I am no actively doing something for several minutes I am logoff and must reenter my logon again. How can I modify the time it stays active?

    When I first logon to windows xp if I am not actively doing something minutes I am logoff and must re-enter my ogon again. How can I modify the length of time that it stays active?

    You can find that in control panel

  • This is a silly question but how do you close the angle editor in the timeline and go back to my master multicam clip for editing? I'm having a brain **** right now...

    This is a silly question but how do you close the angle editor in the timeline and go back to my master multicam clip for editing? I'm having a brain **** right now...

    Never mind...found the cure  Command-{  ...thanks to a  TWolfsky thread...

  • How do i modify the language on pages, i need to be able to write both in english and in spanish.

    how do i modify the language on pages??

    You tell Pages what language the text is by selecting it and applying:
    Inspector > Text > More > Language > Espagñol
    Language is like bold or underlined or ALL CAPS, it is part of the text's style. In fact making it part of a style in the Styles Drawer is a quick way of applying it.
    The default language is whatever you have set the System to.
    Peter

  • How do I modify the image size on OXO template HP

    the temporary site is "http://printtest2.businesscatalyst.com/"
    this is regarding what appears to be a "catalogue" presented on the homepage of the OXO template site. I want to modify the size of the images but can't find where the code is kept.
    When I'm in "design view" it looks like the content is being called by // {module_webapps,13325,a,}
    and when in "code view" it looks like its called by // {module_productfeaturelist,last,2,Default,,,true}
    Where can I view these pieces of code, or the module screens, and how do I modify the attributes?
    Is the {module_productfeaturelist,last,2,Default,,,true}, embedded in the {module_webapps,13325,a,} and if so, where can I go to see that?
    Thanks very much.
    Scott.

    something is changing the file size (dimensions), the actual dimensions are smaller than what is displayed.
    Can I modify the css through the BC admin interface, if so, where?
    I know this is newbie stuff, but I gotta start somewhere.
    Thanks.
    Scott.

  • How can I modify the domain of a comment server?

    Acrobat 9 in Windows 7
    Besides editing the registry, how can I modify the URL for a comment server that I've been using for reviews?
    I earlier initiated a shared review but used only the hostname of the server, not the fully qualified name (FQN) that includes the full domain name. Now, when I reuse that server for other reviews that I initiate, I'm stuck with the unqualified name. Folks outside of my subnet can't publish comments to the server because the simple hostname isn't known on their subnet.
    How can I change the properties of that server so future reviews use the FQN?
    Jerry

    You can't edit the server profile through UI.
    The only way available through Acrobat UI is to first delete the earlier server profile and then re-create it again from the Shared Review Initiation Dialog.
    For deleting the profile, Go to  "Edit menu-> Preferences->Tracker" and from the 'Remove Custome Server Locations' section choose the server profile which you want to delete and click on Remove Server Profile.
    -Priyanka

Maybe you are looking for