How do I modify the display in Dreamweaver itself.

I just loaded Dreamweaver, and I find that all the menus and sidebars have fonts the size of ant footprints. I'm trying to figure out how to format the display of the application itself, but whenever I query on how to modify my menu bar, I get tons of info on how to modify a menu within a page I may be developing, but nothing on how to make the tool itself easier to read.
Thanks in advance for any assistance you may have for me.

Thanks for the feedback. I have a bit of follow-up.
I'm assuming you mean Control Panel\Appearance and Personalization\Display (Windows 7). I went there and I have three options, Smaller, Medium, and Larger. I'm already set at "Larger", but I went ahead and made a customized 200% display. Even though this made my icons so large they were shoved off the side of my display, it had zero impact on the font size of the Dreamweaver menu bar.
What this what you were intending I do?

Similar Messages

How can you modify the displayed columns on a Related Information List?

How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
Thanks

I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
RWB.

How can I modify the display field names on the output port of my bi query

Hello,
I integrate my bi query in the visual composer storyboard.
Then I click on my output port of the query and see the output fields.
The display field names are very strange.
For example:
ABZCNQMDOPWJGHS1Q5Q27090
I have never save such a field name while I create my query in the query designer.
Have somebody an idea, where I can modify my displayed field names??
Thanks.
Thomas

Hi Thomas,
the cryptical names are the technical names of your query components. If there is no decription available (depends also on your portal language) then the technical names are displayed. Check your portal language in your user settings and then check if you have entered a description in the query designer for this language.
Best Regards,
Marcel

How can I modify the Contacts Template to display additional fields with out selecting "add field" everytime?

How can I modify the contacts template in either iCloud, my iPhone, or my iPad to display additional fields that I always use ... example: How can I get Job Title to always be a fillable field with out selecting "add field" everytime?

Let the HairSalon implement the java.lang.Comparable interface. You'll need to write code for
public int compareTo(Object o1, Object o2)
The compare method would cast the Objects to HairSalons and return the difference in price.
Then use java.util.Arrays.sort(Object []);

How do I modify the image size on OXO template HP

the temporary site is "http://printtest2.businesscatalyst.com/"
this is regarding what appears to be a "catalogue" presented on the homepage of the OXO template site. I want to modify the size of the images but can't find where the code is kept.
When I'm in "design view" it looks like the content is being called by // {module_webapps,13325,a,}
and when in "code view" it looks like its called by // {module_productfeaturelist,last,2,Default,,,true}
Where can I view these pieces of code, or the module screens, and how do I modify the attributes?
Is the {module_productfeaturelist,last,2,Default,,,true}, embedded in the {module_webapps,13325,a,} and if so, where can I go to see that?
Thanks very much.
Scott.

something is changing the file size (dimensions), the actual dimensions are smaller than what is displayed.
Can I modify the css through the BC admin interface, if so, where?
I know this is newbie stuff, but I gotta start somewhere.
Thanks.
Scott.

How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

How do you modify the web.xml to lock down the pages from a user role

how do you modify the web.xml to lock down the pages from a user role

I'll make a stab at your question:
The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:

<security-constraint>
<web-resource-collection>
<web-resource-name>protectedA</web-resource-name>
<url-pattern>/protectedA</url-pattern>
</web-resource-collection>

<auth-constraint>
<role-name>sr_developer</role-name>
</auth-constraint>
</security-constraint>
Sun's explaination here:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

How do I change the display order in the VPN menu in the status bar?

Hello,
How do I change the display order in the VPN menu in the status bar?
(in the drop-down menu from this icon) ->
Thanks.

Hello. Perhaps this is because you are trying to arrange the order of many VPN services, since only one VPN service can be selected at once in System Preferences. In my original post, I did not mean that; I meant that I wanted to arrange the order of VPN configurations within a VPN service. In this screenshot, I have one VPN service only:
And in the following one, it is shown that there are more than one VPN configurations within that VPN service:
Furthermore, it was the order of VPN configurations that I wanted to change, not the order of VPN services. If you are trying to change the order of VPN services, I do not have a solution.

How do you modify the default Execute thread count in Weblogic Server 9.2?

How do you modify the default Execute thread count in Weblogic Server 9.2?
How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
Is there an option from the console?
Please let me know.
Thanks

Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
1) Modifying the config.xml
Just add the following line(s) to each server definition :
<server>
<name>AdminServer</name>
<self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
<self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
</server>
2) Adding some JVM parameters
It's safer the following way :
add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
Regards
RR

In iMovie, how do you modify the duration of all the clips at once?

In iMovie, using Mavericks O/S, how do you modify the duration of all the clips at once?

To set the duration of any clips to be added in the future select the project then "Settings" above the viewer. Adjust the slider to the right of "Clips" to the desired duration.
To change clips already in the timeline, select all of the ones you want to change (so they have a yellow border), click on "Adjust" then click the info button (i in a circle). You will see "Duration:" Set the time in seconds and press return.
Geoff.

How can we modify the maximum no. of columns in pivot table ?

hi all,
How can we modify the maximum no. of columns in pivot table ?
do i need to change the nqconfig.ini or instanceconfig file or else?
thnx..

A little search on the forum :
In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
not exist already.
Within the <PivotView> element add an entry that looks like:
<MaxCells>nnnnnn</MaxCells>
where nnnnnn is your desired limit for the maximum total number of cells allowed
in a pivot.
Warning: an excessively large number will cause more memory consumption and
slower browser performance.The details here :
Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee

Zen Vision M: How do you get the Display to st

How do you get the display to stay on when using a transmitter to play songs on the radio? Everytime I connect the transmistter, the Zen display shuts off so I can't select and change songs without disconnecting then reconnecting to play. I don't know if there is a simple option that I'm just not getting. Any suggestions?Message Edited by SKC909 on 04-26-20070:42 PM

SKC909,
Are you connecting the transmitter to the player headphone jack or the AV out? From your post, it sounds like you're doing it from the AV out. If that's the case, go to the player System->Video setting and disable Video out.
Jason

How can I avoid the display of ORA-31684 during impdp import?

Hello,
I'm working on a cross-platform tablespace migration (from SunOS to RedHat Enterprise Linux).
During the import with DataPump, I have several ORA-31684 error messages ("Object type TYPE : "OWNER"."OBJ_NAME" already exists"). Some of my TYPE objects exist already in the Linux instance of the DB. The messages appear only for 4-5 TYPE objects, while overall I have around 180 TYPE objects owned by the schema owner.
How can I avoid the display of these error messages? I don't want to drop the TYPE objects individually from the Linux instance, as the object list may vary in time.
Thank you,
Adrian

Hi,
There is no way to tell the impdp to ignore those errors. They will be printed to the error log and to the screen where the job is being run.
Dean

How do I modify the display in Dreamweaver itself.

Similar Messages

Maybe you are looking for