How do I modify the LV 7 installer for VLM?

I understand there is a procedure for converting a single-seat LV 7 installer into an installer which uses the VLM, but I cannot find it on the NI site. Also, I need the procedure for converting the already-running single-seat LV 7's to VLM.

Hello,
Thank you for contacting National Instruments.
All end-users of software managed by the NI Volume License Manager, must point to server which hosts the NI Volume License Manager rather than looking locally for a license file. In order for the software to know where to look for the NI Volume License Manager, the software must be prepared for network installation. Preparing your software for network installation adds installer steps to automatically point client computers to the NI Volume License Manager server.
Users may either uninstall the software on the client machine and then install the software that was created for network installation, or the users can leave the software installed and simply run the program mslsetup.exe found in the same locat
ion as the network installer. This program, mslsetup.exe will change the software to look to the NI Volume License Manager for a license. This program must be run from the same place that the software network installer is located, for example from the CD or network install location.
Regards,
Bill B
Applications Engineer
National Instruments

Similar Messages

  • How should i modify the hp54600a instrument driver for GPIB so i can use it for RS232 interface ?

    I try to modify the hp54600a instrument driver for GPIB, so i can use it with RS232. But somehow it didnt work. When i try to run the initilize it, the prgoram show VISA read error (time is up before the process is finish). How should I modify the VI so I can use it with RS232 interface ?

    First, check the instrument's user manual to see if the GPIB and serial command sets are the same. Also check to see what EOS(End of String) characters the instrument requires. Then, do a loopback test to test communication in LabVIEW.
    Search Results: Serial Loopback Test
    Ray K
    NI Applications EngineerMessage Edited by Molly K on 02-18-2005 10:57 PM

  • How do you get the 64-bit installer for Windows*?

    Attemping to upgrade iTunes from 11.05.5 to 11.1.o.126x64. During the Download, it's attemps an install, but unable to find the path the contains the folder or package itunes64.msi

    For whatever it's worth, I received an email back in the same day from the "Wireless Device Recycling Team" with a code that went through.  I am not sure who the Recycling Team is, but this was a very positive experience after the frustrations of talking and chatting with CSR's who, while trying hard, were not well informed about this particular issue, so hats off to the Recycling Team.

  • How do you modify the web.xml to lock down the pages from a user role

    how do you modify the web.xml to lock down the pages from a user role

    I'll make a stab at your question:
    The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:
    <!-- security constraints -->
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>protectedA</web-resource-name>
    <url-pattern>/protectedA</url-pattern>
    </web-resource-collection>
    <!-- authorization -->
    <auth-constraint>
    <role-name>sr_developer</role-name>
    </auth-constraint>
    </security-constraint>
    Sun's explaination here:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

  • How do you modify the default Execute thread count in Weblogic Server 9.2?

    How do you modify the default Execute thread count in Weblogic Server 9.2?
    How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
    Is there an option from the console?
    Please let me know.
    Thanks

    Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
    1) Modifying the config.xml
    Just add the following line(s) to each server definition :
    <server>
    <name>AdminServer</name>
    <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
    <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
    </server>
    2) Adding some JVM parameters
    It's safer the following way :
    add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
    Regards
    RR

  • In iMovie, how do you modify the duration of all the clips at once?

    In iMovie, using Mavericks O/S, how do you modify the duration of all the clips at once?

    To set the duration of any clips to be added in the future select the project then "Settings" above the viewer.    Adjust the slider to the right of "Clips" to the desired duration.
    To change clips already in the timeline, select all of the ones you want to change (so they have a yellow border), click on "Adjust" then click the info button (i in a circle).  You will see "Duration:"  Set the time in seconds and press return.
    Geoff.

  • How can we modify the maximum no. of columns in pivot table ?

    hi all,
    How can we modify the maximum no. of columns in pivot table ?
    do i need to change the nqconfig.ini or instanceconfig file or else?
    thnx..

    A little search on the forum :
    In the instanceconfig.xml add a <PivotView> element under <ServerInstance> if one does
    not exist already.
    Within the <PivotView> element add an entry that looks like:
    <MaxCells>nnnnnn</MaxCells>
    where nnnnnn is your desired limit for the maximum total number of cells allowed
    in a pivot.
    Warning: an excessively large number will cause more memory consumption and
    slower browser performance.The details here :
    Oracle BI EE (10.1.3.2): Maximum total number of cells in Pivot Table excee

  • I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

    I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

    AH...good. 
    There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine.  And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
    Long story short...you can install it fine without any issues.

  • How can you modify the displayed columns on a Related Information List?

    How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
    Thanks

    I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
    Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
    RWB.

  • Qosmio X500-15F - How can I modify the DPI?

    Hello
    With Qosmio X500-15F and graphic card NVIDIA GeForce GTX 460M
    I'm using a professional software for jewelry building (Matrix 6.0 based on Rhinoceros 3D 4.0 SR9). When starting it, the software is asking me to set the DPI to normal.
    How can I modify the DPI? I already tried different resolution settings. It doesn't change the problem.
    Thanks for help

    DPI is how many pixels per inch of the LCD. You can't change that.
    I think the software needs a specific resolution or LCD size. Try lowering the resolution to 1280x800 or try an external monitor.

  • When I logon for XP, if I am no actively doing something for several minutes I am logoff and must reenter my logon again. How can I modify the time it stays active?

    When I first logon to windows xp if I am not actively doing something minutes I am logoff and must re-enter my ogon again. How can I modify the length of time that it stays active?

    You can find that in control panel

  • How do i modify the language on pages, i need to be able to write both in english and in spanish.

    how do i modify the language on pages??

    You tell Pages what language the text is by selecting it and applying:
    Inspector > Text > More > Language > Espagñol
    Language is like bold or underlined or ALL CAPS, it is part of the text's style. In fact making it part of a style in the Styles Drawer is a quick way of applying it.
    The default language is whatever you have set the System to.
    Peter

  • How do I modify the image size on OXO template HP

    the temporary site is "http://printtest2.businesscatalyst.com/"
    this is regarding what appears to be a "catalogue" presented on the homepage of the OXO template site. I want to modify the size of the images but can't find where the code is kept.
    When I'm in "design view" it looks like the content is being called by // {module_webapps,13325,a,}
    and when in "code view" it looks like its called by // {module_productfeaturelist,last,2,Default,,,true}
    Where can I view these pieces of code, or the module screens, and how do I modify the attributes?
    Is the {module_productfeaturelist,last,2,Default,,,true}, embedded in the {module_webapps,13325,a,} and if so, where can I go to see that?
    Thanks very much.
    Scott.

    something is changing the file size (dimensions), the actual dimensions are smaller than what is displayed.
    Can I modify the css through the BC admin interface, if so, where?
    I know this is newbie stuff, but I gotta start somewhere.
    Thanks.
    Scott.

  • How to Modify the standard layout set for Sales Order

    Hi all,
    Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
    Thanks in advance
    Santosh R

    Hi, Dear Ferry Lianto,
    Thank you very much.
    Commonly I know the total pricing procedures.
    But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
    For example, I can see the following kind of
    contents in the Tab:condition of a sales order:
    PR00     Price     130.00000      TEST     100
         Gross Value     20.12      USD     100 <-how to
         Discount Amount     0.00      USD     100
         Rebate Basis     20.12      USD     100
         Net Value for Item     20.12      USD     100
         Net Value 2     20.12      USD     100
         Net Value 3     20.12      USD     100
    VPRS     Cost     27.22      HKD
         Profit Margin     16.61      USD
    The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
    Thanks and regards.

  • How can I modify the domain of a comment server?

    Acrobat 9 in Windows 7
    Besides editing the registry, how can I modify the URL for a comment server that I've been using for reviews?
    I earlier initiated a shared review but used only the hostname of the server, not the fully qualified name (FQN) that includes the full domain name. Now, when I reuse that server for other reviews that I initiate, I'm stuck with the unqualified name. Folks outside of my subnet can't publish comments to the server because the simple hostname isn't known on their subnet.
    How can I change the properties of that server so future reviews use the FQN?
    Jerry

    You can't edit the server profile through UI.
    The only way available through Acrobat UI is to first delete the earlier server profile and then re-create it again from the Shared Review Initiation Dialog.
    For deleting the profile, Go to  "Edit menu-> Preferences->Tracker" and from the 'Remove Custome Server Locations' section choose the server profile which you want to delete and click on Remove Server Profile.
    -Priyanka

Maybe you are looking for