How do I monitor HDV externally?

So... my Mac can capture HDV via firewire but it can't send it back from the timeline via firewire? How do I monitor an HDV timeline on an external HDTV?

I don't think a Kona card will work with a dual 1 GHz G4.
Minimum requirements are:
Minimum KONA LH System:
Apple *Power Mac G5 (dual) 2GHz*
with a minimum of 2Gb RAM for uncompressed SD
or 4Gb for uncompressed HD.
*PCI-X slot required* (later G5s have these slots)
HIs video card may be a problem with the MXO.
If he has the ATI Radeon 9000 Pro 64MB DDR SDRAM, Stock video card),
it may not be compatible.
(it has not been tested for MXO compatibilty)
The MXO needs the following:
Matrox MXO requires a Mac system with the following system configuration:
• Mac OS X v10.4.7 or later.
• DVD-ROM drive to install the MXO software.
• Free USB port.
• Display card with a secondary DVI-I connector.
Note You must have a secondary DVI-I connector for use with Matrox MXO, and connect your primary DVI monitor to a different connector on your display card. If you are using an AGP display card, it needs to run at a speed of 4X or faster.
• DVI monitor that supports a native display resolution of 1920×1200 is recommended, such as the 23-inch Apple Cinema Display.
• 512 MB physical memory (RAM) if you're using MXO with a QuickTime-based video editing program (Apple recommends 2 GB for HD editing).

Similar Messages

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

  • How do I connect an external monitor to my MacBook Air?

    How do I connect an external monitor to my MacBook Air?

    With a minidisplay port to VGA or DVI or HDMI adapter:
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter?fnode =53

  • Hp dv6 1355dx laptop - how do I connect 2 external monitors?

    I have a HP dv6 1355dx laptop Entertainment PC.  How do I connect 2 external monitors (both have VGA cables) and neither one has HDMI connectors.  My laptop has only 1 VGA connector, so I can display my laptop video and 1 of the external monitors. 
    Any help would get greatly appreciated.  I am even willing to buy a docking station or port replicator.

    Hi,
    Docking station or port replicator won't solve the problem because of your internal graphics card. You need something which is similar to the following products:
        http://www.matrox.com/graphics/en/products/gxm/
    or USB to 2 VGA monitors but very hard to find (normally you can only get 1 VGA and 1 other, not both VGA's).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I view an external display with my macbook pro closed?

    How do I view an external display with my macbook pro closed?  I am using  a wireless keyboard and trackpad, and I would like to use a larger (Dell) monitor with my Macbook Pro closed.

    Here are the rules for Clamshell mode:
    http://support.apple.com/kb/HT3131

  • Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

    Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

    You can output audio thru HDMI, with appropriate adapter.
    You can use additional cheap external usb audio for monitoring.

  • How do you monitor backup progress

    How can you monitor the progress of a backup? I use timemachine and an external drive  to do my backups on my 09 Macbook pro. I want to be able to see the amount of files transferred and time remaining or any other pertinent info. Not just a spinning wheel.

    I don't know, I use bootable clones myself and it shows me the progress of the backup and updating of files.
    However I can point you to this guy who is the local TM guru
    All about Time Machine
    If you want to learn more about all sorts of backups to diversify your restore options (TM can fail to restore properly), including bootable clones etc. then read my UT here on the subject.
    Most commonly used backup methods explained
    I personally don't use TimeMachine, preferring the more advanced bootable clone options.

  • How to create  monitoring tool in SAP BI

    HY! Experts,
    i was new to BI Platform
    how to do monitoring in the BI  and why do we do monitoring please tell me.
    please tell me the following steps to be taken
    what are the steps needed to be taken .
    thanks & Regard.........
    Ravi Sarma..........

    Hi Ravi,
    In BW we load data from various external data sources like R/3, flat files, ECC etc..
    In a live environement, everyday we load data from various data sources to BW. There can be many scenarios where these loads can fail. if any load fails we have to rectify the issue and load should start again. Else all the rest of the jobs will stuck and data will not be loaded to BW. so the users wont be able to do reporting. That is why we need to monitor these loads that it is running fine, no jobs are stuck.
    We design process chains to load data to BW, which executes steps required to laod data to the targets in BW.
    Refer the below link.
    Process chain monitoring
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    How to do process chain monitoring effectively in BW ?
    Hope this will help.
    - Jaimin

  • Qosmio G40 - How do I monitor sound input?

    I have installed Adobe Audition on my Qosmio G40 but have been unable to monitor sound input or get Auditon to record. (It used to work fine on my xp pc) I have been able to record sound but cannot listen to it as its 'going in'. I also tried to install an external sound card: CREATIVE EXTIGY but cannot get the laptop to recognise that it is installed.
    Can EXTIGY work with my laptop?
    How do I monitor sound input?
    The installed sound card is Realtek
    Advice welcome.
    Sean.

    I presume you mean the menu when you right-click the volume control icon on the desktop toolbar. It does list the input devices and when a mini jack input is connected the simulated led lights respond to the volume of the input. I can record from the line input but I cannot hear it as it is going in. In other words it records it silently but plays it back okay.
    The device manager declares that the sound card is working without problems,
    Somehow I want to be able to hear the input as it is being recorded and I have not been able to find out how yet. Some people have been telling me that it is a vista problem. Others say that its the laptop manufacturers who set up the laptop so that when recording line input the sound is disabled to prevent feedback from the external mic on the laptop.
    Either way I am a bit astonished that I cannot resolve this problem and it is not a problem that has been mentioned before when you consider how many thousands of people are buying Toshiba laptops !!
    A few days ago I emailed Realtek but have not held my breathe for a reply.
    Its looking like I might have to uninstall vista and reinstall xp to solve this problem.

  • MSExchange Monitoring OWAConnectivity External failure

    Hello Sir,
    Could some one help me on the below issue. As we are getting exchange alert from the SCOM Sever more frequently. No error id's in SCOM server as well as in exchange server. The OWA links are opening fine with out any issues for the external users, but still
    getting alert from SCOM.
    In SCOM Server the "CLIENT ACEESS" has RED X.(ERROR)
    Please assist us how to fix the below error.
    Date and Time: 20/02/2015 15:02:32
    Log Name: Script-generated data
    Source: MSExchange Monitoring OWAConnectivity External
    Event Number: 1001
    Level: 1
    Logging Computer: NGss.xxx.local
    User: 
     Description:
    One or more of the Outlook Web App connectivity tests failed. Detailed information: ------------------------------------- Target: NGss.xx.local|BGRP Error: The test received an unexpected response to an Outlook Web App request. URL:  https://owa.exx.xxx.com/owa//
    Details: [15:02:11.758] : The TrustAnySSLCertificate flag was specified, so any certificate will be trusted. [15:02:11.758] : Sending the HTTP GET logon request without credentials for authentication type verification. [15:02:32.758] : The test received an
    unexpected response to an Outlook Web App request. URL:
    / Authentication Method: Mailbox Server: sss.xxx.local Client Access Server Name: sss.xxx.local Scenario: Logon Scenario Description: Sign in to Outlook Web App and verify the response page. User Name: extest_730bfbcde7a04 Performance Counter Name: Logon
    Latency Result: Failure Site: BGRP Latency: -00:00:00.0010000 Secure Access: True ConnectionType: Plaintext Port: 0 Latency (ms): -1 Virtual Directory Name: owa (Default Web Site) URL:
    https://owa.exx.xxx.com/owa/ URL Type: External Error: The test received an unexpected response to an Outlook Web App request. URL:
    / ------------------------------------- Diagnostic command: "Test-OwaConnectivity -TestType:External -MonitoringContext:$true -TrustAnySSLCertificate:$true -LightMode:$true"
    Event Data:
    Date and Time: 20/02/2015 15:02:32
    Property Name Property Value
    Message One or more of the Outlook Web App connectivity tests failed. Detailed information: ------------------------------------- Target: sss.xxx.local|BGRP Error: The test received an unexpected response to an Outlook Web App request. URL:
    https://owa.ss.xxx.com/owa/ Details: [15:02:11.758] : The TrustAnySSLCertificate flag was specified, so any certificate will be trusted. [15:02:11.758] : Sending the HTTP
    GET logon request without credentials for authentication type verification. [15:02:32.758] : The test received an unexpected response to an Outlook Web App request. URL:
    https://owa.ss.xxx.com/owa/ Authentication Method: Mailbox Server: sss.xxx.local Client Access Server Name: sss.xxx.local Scenario: Logon Scenario Description: Sign in to Outlook Web App and verify the response page.
    User Name: extest_730bfbcde7a04 Performance Counter Name: Logon Latency Result: Failure Site: BGRP Latency: -00:00:00.0010000 Secure Access: True ConnectionType: Plaintext Port: 0 Latency (ms): -1 Virtual Directory Name: owa (Default Web Site) URL:
    https://owa.ss.xxx.com/owa/ URL Type: External Error: The test received an unexpected response to an Outlook Web App request. URL:
    https://owa.ss.xxx.com/owa/ ------------------------------------- Diagnostic command: "Test-OwaConnectivity -TestType:External -MonitoringContext:$true -TrustAnySSLCertificate:$true
    -LightMode:$true"
    EventNumber 1001
    EventType 1
    EventSource MSExchange Monitoring OWAConnectivity External
    EventInstanceName 
    LoggingComputer sss.xxx.local
    Thanks in Advance
    Regards,
    Sanjeev Kumar N

    Hi,
    This cmdlet runs against a Mailbox server by using a specific mailbox. Make sure that this mailbox has been created by running the new-TestCasConnectivityUser.ps1 script.
    Please go through the link below for more details:
    Outlook Web App connectivity (Internal) transaction failures
    https://technet.microsoft.com/en-us/library/ff360043(v=exchg.140).aspx
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How do I use an external mic with the iPad4?

    How do I connect an external mic to the new iPad4? Older models seem to have worked, but the lightning connector causes a lot of problems. I would like to use my Zoom H1 with my iPad4 and GarageBand. Any ideas? Thanks so much!

    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • How do i use an external display with my macbook pro?

    How do I use an external display with a macbook pro?

    Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example.  Plug it in and it will be automatically recognized.  Use System Preferences > Displays to set options.
    The display can Mirror your primary desktop or Extend the Desktop.
    Regards,
    Captfred

  • I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive?

    I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive in Iphoto?

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • How to assign numbers in external number range?

    Dear experts,
    Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
    So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
    Thanks in advance.
    Regards,
    Haris
    Edited by: harissahlan on Oct 19, 2011 5:44 AM

    With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

Maybe you are looking for