How do i monitor the network?

is it possible to access URL's visited through any Apple software?

A neighbor highly recommends Open DNS, and it appears to be a very popular choice with other forum users, but I have not used it.
More info here, if you want to take a look:
http://www.opendns.com

Similar Messages

  • How do I monitor the listener process

    After starting the listener, I have to wait for few min. before I connect to the database.
    Otherwise I get the following error.
    How do I monitor the listener process and make sure, still it is trying to
    establishing connection with oracle instance ?
    thanks
    siva

    After starting the listener, I have to wait for few
    min. before I connect to the database.That's normal when the registration is dynamic (no SID_LIST in listener.ora). This does not happen if the listener is started before the DB. See http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14212/architecture.htm#sthref429
    But you can force the registration. As sysdba do
    SQL> alter system register;
    or you can statically configure your DB within listener.ora, SID_LIST section.
    How do I monitor the listener process $ lsnrctl status
    and
    $ lsnrctl services

  • How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

    How do I change the network settings on my Apple TV? We have two wireless options and need to switch.

    Welcome to the Apple Community.
    Settings > General > Network > WiFi and select your network.

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How can i get the network my iphone4 is locked to?

    how can i find the network my phone 4s is locked to..?

    Surely you must know who your carrier is?  Who bills you?

  • How can i know the network of iphone 4?

    How do i know the network of Iphone 4 using the IME number. Tnx

    Call AppleCare. That's the only reliable way to determine this info.

  • How do I monitor the actual refresh of materialized view.

    Hi See below,
    I am creating the materialized view.
    It took a while to see the actual data in the table. Do you any reason.
    How do I, investigate, if there is any issue, how do I monitor the actual refresh.
    I am worried since, it look long time to see the actual data, after creating the materialized view.
    SQL> @"ee_grant_details_mview.sql.bkp"
    Snapshot dropped.
    Snapshot created.
    SQL>
    select count(*) from grant_details_mview;SQL>
    COUNT(*)
    0
    SQL> select count(*) from grant_details_mview;
    COUNT(*)
    0
    SQL> commit;
    Commit complete.
    SQL> select count(*) from grant_details_mview;
    COUNT(*)
    0
    SQL> select count(*) from grant_details_mview;
    COUNT(*)
    0
    SQL> select count(*) from grant_details_mview;
    COUNT(*)
    0
    SQL> select count(*) from grant_details_mview;
    COUNT(*)
    0
    SQL> select count(*) from grant_details_mview;
    COUNT(*)
    344466
    SQL>

    During the initial building of the materialized view, the data is not available to users until the refresh completes.
    If you are talking about subsequent refreshes, you have a few options
    - Can the materialized view be made fast refreshable?
    - If not, can you put the materialized view be put into a refresh group? This will increase the time required to refresh, since Oracle would be deleting and inserting rather than truncating and inserting, but the old data will remain available for users until the refresh completes.
    Note that the Replication or Database - General forums might be more appropriate for this sort of question. You may want to move further discussion to one of those forums.
    Justin

  • How can I monitoring the usage of an index in oracle 8i

    Dear Gurus,
    I known the Oracle 9i have this new feature "Identifying Unused Indexes" via ALTER INDEX MONITORING USAGE, but how can I monitoring the index usage in the Oracle 8i?
    Regars

    You can't in 8i. However you can look at the SQL Text in the SGA looking for anything that matches the table name that the index is for and then look at the explain plan for the selects and updates. Pain in the xxx to do but it should give you the information.

  • TS2220 How do you reset the network password for Airport wireless?

    How do you reset the network password for Airport wireless?

    Use AirPort Utility...select the AirPort Express and in the menu select Base Station...Restore Default Settings...

  • How do i monitor the health of my Raid array?

    First, I want to thank Harm, Bill, and all the countless others who continue to give great advice on this forum.  My question is how to I monitor the health of my raid array and how to determine which disk is acting up.   I am using a 3-disk soft raid 0 off my motherboard (gigabyte ud3p).  Seems to work pretty well but occasionally has a hiccup in certain programs.  I wonder if it is a sign of an impending problem or if it is just because it is a soft raid.  I've tried several HD diagnostics (Crystal Disk Info, Active@, HD Tune, etc.) but aside from temperature, they don't give any info about the impending death of my raid 0.  I have the SMART feature turned on in bios.
    To premtively address the critics about the raid 0.  I only do about one video a week and do a backup every night.  So i figured it (and when) it crashes, i'll just lose a days work. The motherboard is suppose to do a raid 5 but it performed really poorly.  My system is configured with additional drives (SSD boot, Raid 0 scratch, and final video) as recommended.  Any advice would be appreciated.
    michael

    The problem with almost all raid controllers is that they do not support SMART. So that is out. With software raids you are even more limited.
    With hardware raid controllers you have web based interfaces that show some basic information, like this:
    but software raids do not. There are two ways to determine possible problems, at least that I know of:
    1. Use drive cages with LED's for the individual drives to show activity and inspect them visually.
    2. Use old-fashioned manual labour to feel vibrations, temperatures and hear clicks on individual drives.
    With only 3 drives in the raid, the chances of guessing correctly are 33.3% to start with and they only increase with manual inspection. A far easier job than in the case of 6 or more disks.
    Sorry I can not offer better suggestions.

  • How do i monitor the temperature

    Hi, how do i monitore the temperature of my macbook C2D? what is the normal temp of the macbook?
    Thanks

    Many ways to see those numbers. I use the iStat pro widget:
    http://www.apple.com/downloads/dashboard/status/istatpro.html
    wich gives a lot of useful info. As for normal operating temperature, some macbooks run cooler than others. My temperature at idle (not start up) is in the low 50s (celsius). Fans start to ramp up in the low 60s, and won't let the temp climb up to more than, say, 78-80, under a very heavy work load.

  • How can i use the network logon (VPN) as my default logon environment ?

    Hi!
    I use my laptop only for connect to my work, but every time i need to switch the last local user and click in the Network Logon icon in the bottom right corner, how can i make the network logon my default logon environment ?

    Hi,
    Logon process cannot be easily replaced, but if your concern is just to ignore it, we can use auto logon to bypass the manual logon process:
    Autologon for Windows
    http://technet.microsoft.com/en-in/sysinternals/bb963905.aspx
    Alex Zhao
    TechNet Community Support

  • How do I reset the network name and password?

    I just bought an Apple Airport Extreme base station. When I was going to set up the network, I found that it has a name, apple, for the network. I do not have the password to go in further. How do I have to do to rest the whole thing?
    Thank you for your help.
    Robert

    Hold the reset button on the back of the unit for 5-10 seconds. It will reset the name to Apple<lastdigitsofyourextremeid> and will remove the password. You can then use AirPort Utility to configure the password to what you want it to be, if any.

  • How do you setup the network connection on an ipod 4th gen?

    does anyone know how to setup the network connection on an ipod 4th gen. please and thank you.

    Go to Settings>wifi and turn wifi on,. Then tap the network you want to join. Enter ther passward for that network if it is required.
    Also see:
    iOS: Recommended settings for Wi-Fi routers and access points

  • How can I monitor the voltage output sent to each servo axis programmatically?

    Hi I am wondering if it is possible to monitor the voltage that's being sent to a servo motor during an axis position movement (in particular quantities such as max voltage). I am using a PID controller to drive this servo motor.
    Thanks
    Vlad

    Hi Vlad,
    Unfortunately, I don't think there is a way to programmatically read the voltage output to the drive, as the voltage is all determined internally by the controller circuitry on the board. Depending on the controller though, you may be able to physically route the output terminal to a spare analog input channel and read in the voltage that way. This example Analog Input with 73xx Motion Card shows you how to program LabVIEW to do this. 

Maybe you are looking for

  • No "VOCALS" in Loop Browser?

    The "VOCAL" tab in the Loop Browser (in both Garage Band and Logic Pro) is grayed out and not accessible. Why have a Tab with no samples associated with it? thanks,

  • Populating selection screen of one prog by calling from another prog

    This is regarding variant population. I need to populate values in selection screen fields of one program (program 2)by calling from another executable ABAP program(.Program 1) I can identify the variant that i need ot populate.But there is a pushbut

  • Updating Database table

    Hi, My requirement is to update the table EBAN(Purchase Requisition). Let us suppose that there are 3 items in the purchase requisition. If I make any changes to any of the item, the other two items need to be updated with the same changes. I am usin

  • Adding Records In The User Exit

    I have a requirement to modify the transactional data user exit 0CO_PC_PCP_01. Currently this datasource extracts cost estimate data and using some complex rules I need to determine the active cost estimate for each month and duplicate the records ac

  • LSMW - MB1C Variant

    hi, I need to migrate data, usualy entered through transaction MB1C ("Enter other goods receipts"), with movement type 501, where after entering materials (from class 023) screen for classification pop up. Is there any object in LSMW that can migrate